Hobby-Lobby
800MAH 2S 7.4V 10C LIPO BATTERY W/ JST
Type | LiPo |
Capacity | 800mAh |
Voltage | 7.4V |
Connector Type | BEC |
Weight | 1.5 oz (42 g) |
Length | 2.02 in (51.4mm) |
Width | 1.16 in (29.5mm) |
Height | 0.60 in (15.3mm) |
Maximum Continuous Discharge | 10C |
Technical Specifications:, 7.4V 800mAh LiPo Battery Specs:, Number of Cells:2, Charge Protection Circuitry:, Balance Charge Lead used on PKZ1040 charger,
7.4 800 mAh Lipo Battery 7.4 800 mAh Lipo BatteryHobby-Lobby
FLAT ADHESIVE MOUNTS
Warranty | One Year |
What's Included:, 5 Flat, 3M Adhesive Mounts,
Flat Adhesive Mounts These are the same mounts already included ...Hobby-Lobby
1/7 PILOT-CIVILIAN,YOUNG W/HEADPHONES & SUNGLASSES
Width | 3.31 in. (84mm) |
Height | 3.13 in. (79mm) |
Weight | 1.3 oz. (36g) |
Highlights:, Painted pilot figure gives aircraft a realistic appearance, Specs:,
1/7 Pilot-Civilian,Young w/Headphones & Sunglasses Hangar 9's series of painted ...Hobby-Lobby
SPARE 2-BLADE SET, 9-1/2"
,
Spare scale prop blades Replacement blades for SMP Variable Pitch ...Hobby-Lobby
42MM 3 BLADE SPINNER FOR 5MM SHAFT
,
42mm 3 Blade Spinner for 5mm Shaft Precision spinners for ...Hobby-Lobby
FIREHAWK KIT E2X
Technical Specifications | Firehawk Specs |
Length | 11.2 in. (28.4 cm) |
Diameter | .74 in. (19 mm) |
Estimated Weight | .65 oz. (18.4 g) |
Recommended Engines | 1/4 A3-3T (First Flight), 1/2A3-2T, A3-4T, A10-3T |
Projected Max Altitude | 550 ft. (168 m) |
Hobby-Lobby
RADIAN PRO BNF (OVERSIZE)
Wingspan | 78.5 in. (2000mm |
Length | 45.0 in. (1140mm) |
Flying Weight | 34.6 oz. (980g) |
Radian Pro BNF Highlights:, 5-channel control - throttle, aileron, elevator, rudder and flaps, Needed to Complete:, A 5+ Channel DSM2 compatible Transmitter, Technical Specifications:, Radian Pro BNF Specs:, Motor Size:, 480 Outrunner Brushless Motor 960kV, CG (center of gravity):, 2.75 in (70mm) back from the leading edge of the wing at the root, Prop Size:, 9.75 x 7.5 in. Folding Prop, Radio:, E-Flite 30Amp Pro Switch-Mode Brushless ESC, Needed to Complete:, A 5+ Channel DSM2 compatible Transmitter,
Designed with experienced sailplane pilots in mind Designed with experienced ...Hobby-Lobby
F-86 SKYBLAZERS EDF JET AIRFRAME ONLY
Technical Specifications:, Length:, 27-1/2", Wingspan:, 27-1/2", Flying Weight:, 16-1/2 oz., Controls:, Ailerons, Elevator, Throttle,
Add your own electronics and radio equipment Before the Thunderbirds ...Hobby-Lobby
5000MAH 4S 14.8V 45C LIPO BATTERY
Battery Type | LiPo |
Capacity | 5000 + mAh |
Connector Type | Open Ends |
Maximum Continuous Discharge | 45C |
5000mAh 4S 14.8V G6 Pro Performance 45C LiPo Highlights:, G6 Pro Performance 45C batteries deliver up to 60% more power than previous generation batteries and up to 600+ cycles, Technical Specifications:, 5000mAh 4S 14.8V G6 Pro Performance 45C LiPo Specs:, Configuration:4S,
5000mAh 4S 14.8V 45C LiPo Battery Never before has such ...Hobby-Lobby
SILICONE FUEL TUBING 2' MEDIUM
,
Silicone Fuel Tubing 2' Medium Silicone Fuel Tubing 2' MediumHobby-Lobby
VENOM POWER 2-3 CELL LIPO BALANCE CHARGER
Venom Power 2-3 Cell LiPo Balance Charger Highlights:, Charges LiPO Specific Battery Packs,
Venom Power 2-3 Cell LiPo Balance Charger This 2-3 Cell ...Hobby-Lobby
ALUMINUM ADAPTERS WITH O-RING FOR PROP SAVER
,
Aluminum Adapters with O-Ring for Prop Saver Additional set of ...Hobby-Lobby
ULTRALIGHT COLLET PROP ADAPTER FOR 2.3MM SHAFT, M5
,
Lightweight Collet prop adapters, great for light indoor models Collet ...Hobby-Lobby
30MM TURBO SPINNER FOR 5MM SHAFT
These spinners have a hole in the front that lets air enter through the nose of the rc plane - a great way to cool the electric motor instead of using a fuselage air scoop. Included: turned aluminum spinner, middlepart yoke, screws for prop blades, and collet type motor shaft adapter. The width between the arms of the prop yoke is 8mm. AeroNaut folding propeller blades have 8mm wide hubs. For DKT3623, use Graupner Scimitar or CAM folding prop blades. For all others, use AeroNaut CAM Carbon or Classic Carbon folding prop blades.,
Turbo spinners have air intakes for motor cooling and include ...