Hobby-Lobby
AC/DC 50W BALANCE CHARGER
| Specifications | AC Input |
| DC Input | 11-18V |
| Charge current | .1-6A (50w Max) |
| Discharge current | .1-1A (5A Max) |
| NiCD/NiMH Cells | 1-15 |
| Lipo/LiFe/LiIo Cells | 1-6 |
| Pb battery voltage | 2-20V |
| Weight | 433g |
| Dimensions | 135x112x60.9mm |
Hobby-Lobby
2-5 CELL LIPO, LILON, & LIFE BALANC
,
2-5 Cell LiPo, Lilon, & LiFe Balanc 2-5 Cell LiPo, ...Hobby-Lobby
1-4 CELL LIPO, 0.3-2.5 AMP DC CHRGR
,
1-4 CELL LIPO, 0.3-2.5 AMP DC CHRGR 1-4 CELL LIPO, ...Hobby-Lobby
CELECTRA 2S 7.4V DC LI-PO CHARGER
,
Celectra 2S 7.4V DC Li-Po Charger Needed To Complete This ...Hobby-Lobby
B6-PRO 80 WATT BALANCE CHARGER FOR 1-6 LIPO CELLS
| Operating voltage range | DC 11.0~18.0 Volt |
| Charge current range | 0.1~5.0A |
| Discharge current range | 0.1-2.0A |
| Current drain for balancing Li-po | 300 mAh/cell |
| NiCd/NiMH battery cell count | 1-15 cells |
| Li-ion/Polymer cell count | 1-6 series |
| Pb battery voltage | 2V, 20V |
5-5/8" x 3-3/8" x 1-3/8". Multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger., B6-Pro Includes:, Internal independent lithium battery balancer:, Employs an individual-cell-voltage balancer to maintain your pack in balance while charging., Balance individual cells during discharge:, During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal., Fast and Storage mode charging:, "Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack., Charges various types of LiPoly cells:, Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types., Data store/load:, Up to 5 batteries' data can be stored for easy programming., Cyclic charging/discharging:, 1-5 cycles of either charge>discharge or dischage>charge is possible., B6-Pro Specs:, Circuit power:, Max. charge power 80W,
Balance charges 1-6 Lithium cells at up to 5A B6-Pro ...Hobby-Lobby
SKYRC B6 ULT 400 WATT 20 AMP CHRGR
| Operating Voltage Range | DC 12.0-18.0 V |
| Max. Charge Power | 400W |
| Max. Discharge Power | 25W |
| Net Weight | 720g |
| Dimensions | 145x141x60mm |
Key Features:,
SkyRC B6 Ult 400 Watt 20 Amp Chrgr Ultimate 400W ...Hobby-Lobby
HITEC H4 DC 4 PORT SMART CHARGER
| Features | Aluminum design |
| Input Voltage Range | DC 12 - 18 Volts DC |
| Required Input Amperage | 40 Amps / 500 Watts |
| LiPo,LiFe & LiIon Balancing Current Drain | 200mA per Cell |
| LiPo,LiFe & LiIon Cell Count | 1 - 6 Cells |
| Maximum NiCd/NiMh Cell Count | 1 - 15 Cells |
| Lead Acid (Pb) Cells / Voltage | 2 - 20 Volts |
| Dimensions (W x D x H) | 8.1" x 6.4" x 2.0" |
| Weight | 3.2 lbs |
Technical Specifications:, Charger Circuit Power:, 120 watts x 4 or 240watts x 2 Using Channel Bridge Function, Discharge Circuit Power:, 10 watts x 4 or 20 watts x 2 Using Channel Bridge Function, Charge Current Range:, 0.1 - 8.0 Amps per Channel or 0.1 - 16A Using Channel Bridge Function, Discharge Current Range:, 0.1 - 2.0 Amps per Channel or 0.1 - 4A Using Channel Bridge Function,
Hitec H4 DC 4 Port Smart Charger The H4's easy ...Hobby-Lobby
MEDION DUAL DC 10 AMP CHARGER
Key Features:, Dual 200-watt charge circuits,
Medion Dual DC 10 Amp Charger Venom has developed a ...Hobby-Lobby
X2 ULTIMA 2-CHANNEL DC CHARGER
| Input | DC 11-18V 30A |
| Length | 8.2 in (200mm) |
| Width | 5.3 in (135mm) |
| Height | 2.2 in (57mm) |
X2 Ultima 2-Channel DC Charger Highlights:, Compatible with 1-6 cell LiPo, Li-Ion, LiFe, 1-18 cell NiMH, NiCd and 1-12 cells Pb (lead) batteries, Technical Specifications:, X2 Ultima 2-Channel DC Charger Specs:, Current Discharge:, 0.1~5.0A (max 25W, total 50W), Charge Rate:, 0.1~10.0A (max 200W, total 400W), Output Connector:, 4mm banana plug with 12 AWG wire, Battery Type:, 1-6 cell LiPo, Li-Ion, LiFe, 1-18 cell NiMH, NiCd and 1-12 cells Pb,
X2 Ultima 2-Channel DC Charger System functions as a charger, ...Hobby-Lobby
ONYX 245 AC/DC DUAL BALANCE CHARGER
| AC Input | 110V AC 60Hz switching supply with U.S. plug |
| DC Input | 11-15V DC, built-in lead with alligator clips |
| Cooling Method | Fan |
| Protective Devices | Solid-state reverse polarity and current overload |
| Case Size | 7.95 x 6.1 x 1.77 in (202 x 156 x 45 mm) |
| Weight | 28.2 oz (801 g) |
| Battery Types | 4-8 NiCd or NiMH (4.8-9.6V) 1-3 LiPo or LiFe (3.7-11.1V) |
| Battery Capacity | 100-7500mAh |
| Fast Charge Current | 0.8A, 1.5A, 3A, 5A linear (80W total, 40W each output) |
| Fast Charge Termination | Peak detection for Ni, cc/cv for lithium |
| Lithium Balancing Accuracy | 5mV per cell |
| Lithium Balancing Adapters | DuraTrax and FlightPower/Thunder Power |
| Lithium Maximum Node Current | 200mA |
| Fast Charge Safety Timer | 90 minutes |
| Peak Sensitivity | 8mV for NiCd, 5mV for NiMH |
| NiCd/MH Trickle Current | Auto (50, 100, 150, 250mA) |
| Controls | 3 Pushbuttons |
| Display Type | 7-Segment custom LCD with blue backlight |
| Output Connections | Built-in banana jacks, Built-in jack for 4-5 cell Rx packs or Tx packs |
| Included Output Adapters | Banana to Standard, Banana to Deans Ultra Plug, Banana to Traxxas High-Current Plug |
| Audible Tones | Indicate start, stop, errors |
Technical Specifications:, Specifications for Each Output:,
Onyx 245 AC/DC Dual Balance Charger Two independent outputs... both ...Hobby-Lobby
B6AC PRO BALANCE CHARGER / DISCHARG
,
B6AC Pro Balance Charger / Discharg B6AC Pro Balance Charger ...Hobby-Lobby
ONYX 150 AC/DC LIPO CHARGER
,
Onyx 150 AC/DC LIPO Charger Key Features Charges 1-3S LiPo ...Hobby-Lobby
AC/DC 50W BALANCE CHARGER
| Specifications | AC Input |
| DC Input | 11-18V |
| Charge current | .1-6A (50w Max) |
| Discharge current | .1-1A (5A Max) |
| NiCD/NiMH Cells | 1-15 |
| Lipo/LiFe/LiIo Cells | 1-6 |
| Pb battery voltage | 2-20V |
| Weight | 433g |
| Dimensions | 135x112x60.9mm |
Hobby-Lobby
X1+ AC SINGLE PORT AC/DC CHARGER
X1+ AC Single Port AC/DC Charger Highlights:, Optimized Operating Software, Technical Specifications:, X1+ AC Single Port AC/DC Charger Specs:,
X1+ AC Single Port AC/DC Charger Whoever said you can't ...