Hobby-Lobby
5000MAH 3S 11.1V 25C LIPO BATTERY
| Battery Type | LiPo |
| Capacity | 5000 + mAh |
| Connector Type | Open Ends |
| Maximum Continuous Discharge | 22C |
5000mAh 3S 11.1V G6 Pro Lite 25C LiPo Highlights:, G6 Pro Lite 25C batteries deliver up to 60% more power than previous generation batteries and up to 600+ cycles, Technical Specifications:, 5000mAh 3S 11.1V G6 Pro Lite 25C LiPo Specs:, Configuration:3S,
5000mAh 3S 11.1V 25C LiPo Battery Thunder Power RC Pro ...Hobby-Lobby
5000MAH 5S 18.5V 25C LIPO BATTERY
| Type | LiPo |
| Capacity | 5000mAh |
| Voltage | 18.5V |
| Connector Type | Open Ended |
| Weight | 20.7 oz (588g) |
| Length | 5.35 in (136mm) |
| Width | 1.69 in (43mm) |
| Height | 1.77 in (45mm) |
| Maximum Continuous Discharge | 25C |
| Maximum Burst Discharge | 50C |
| Maximum Continuous Current | 125A |
Jason Says:, "Simply the best. If performance and service matters, there is no better than Thunder Power.", 5000mAh 5S 18.5V G6 Pro Lite 25C LiPo Highlights:, G6 Pro Lite 25C batteries deliver up to 60% more power than previous generation batteries and up to 600+ cycles, Technical Specifications:, 5000mAh 5S 18.5V G6 Pro Lite 25C LiPo Specs:, Configuration:5S,
5000mAh 5S 18.5V G6 Pro Lite 25C LiPo Thunder Power ...Hobby-Lobby
3300MAH 3S 11.1V 25C LIPO BATTERY
,
The world's lightest high-performance batteries for sport and competition use ...Hobby-Lobby
PUSHROD TRANSFER LINKAGE, 2
Puts an end to slop and backlash caused by running a bent wire pushrod linkage through a fuselage. Use one for rudder pushrod, one for elevator. Simple to install: it also prevents those big ugly wallowed-out exit slots that your receiver could fall through.,
Best way we've seen to bring a pushrod out of ...Hobby-Lobby
13" MAIN LANDING GEAR
13" Main Landing Gear Specs:, 13 in. Wide,
Inexpensive main landing gears Inexpensive main landing gears about 2" ...Hobby-Lobby
1/5 SCALE GENERAL AVIATION COCKPIT INSTRUMENTS, SET 1
,
Scale instruments for modern civil aircraft Super detailed, pre-assembled cockpit ...Hobby-Lobby
ULTRALIGHT COLLET PROP ADAPTER FOR 3.2MM SHAFT, M5
,
Lightweight Collet prop adapters, great for light indoor models Collet ...Hobby-Lobby
SCALE 2-BLADE 9-1/2 X 10 VARIABLE PITCH PROP
,
Great scale looks - variable pitch Ground adjustable variable pitch ...Hobby-Lobby
30MM TURBO SPINNER FOR 3.2MM SHAFT
These spinners have a hole in the front that lets air enter through the nose of the rc plane - a great way to cool the electric motor instead of using a fuselage air scoop. Included: turned aluminum spinner, middlepart yoke, screws for prop blades, and collet type motor shaft adapter. The width between the arms of the prop yoke is 8mm. AeroNaut folding propeller blades have 8mm wide hubs. For DKT3623, use Graupner Scimitar or CAM folding prop blades. For all others, use AeroNaut CAM Carbon or Classic Carbon folding prop blades.,
Turbo spinners have air intakes for motor cooling and include ...Hobby-Lobby
30MM ALUMINUM SPINNER FOR 4MM SHAFT
Lightweight (10 gram) precision spinners turned from aluminum bar stock. Each includes: turned aluminum spinner, middlepart yoke, screws for prop blades and collet type motor shaft adapter. The width between the arms of the prop yoke is 6mm and the prop pin diameter is 2mm. Fits Graupner CAM folding props with 6mm wide bases.,
Precision turned aluminum spinner with blade holders and collet prop ...Hobby-Lobby
30MM ALUMINUM SPINNER FOR 2MM SHAFT
Lightweight (10 gram) precision spinners turned from aluminum bar stock. Each includes: turned aluminum spinner, middlepart yoke, screws for prop blades and collet type motor shaft adapter. The width between the arms of the prop yoke is 6mm and the prop pin diameter is 2mm. Fits Graupner CAM folding props with 6mm wide bases.,
Precision turned aluminum spinner with blade holders and collet prop ...Hobby-Lobby
30MM TURBO SPINNER FOR 3MM SHAFT
These spinners have a hole in the front that lets air enter through the nose of the rc plane - a great way to cool the electric motor instead of using a fuselage air scoop. Included: turned aluminum spinner, middlepart yoke, screws for prop blades, and collet type motor shaft adapter. The width between the arms of the prop yoke is 8mm. AeroNaut folding propeller blades have 8mm wide hubs. For DKT3623, use Graupner Scimitar or CAM folding prop blades. For all others, use AeroNaut CAM Carbon or Classic Carbon folding prop blades.,
Turbo spinners have air intakes for motor cooling and include ...Hobby-Lobby
30MM ALUMINUM SPINNER FOR 5MM SHAFT
Lightweight (10 gram) precision spinners turned from aluminum bar stock. Each includes: turned aluminum spinner, middlepart yoke, screws for prop blades and collet type motor shaft adapter. The width between the arms of the prop yoke is 6mm and the prop pin diameter is 2mm. Fits Graupner CAM folding props with 6mm wide bases.,
Precision turned aluminum spinner with blade holders and collet prop ...Hobby-Lobby
9X4.7 APC SLOWFLYER PROP
Special thin, light, and wide blade shapes that work well on slowflyers. Prop shaft hole: 4.72mm (0.186"), hub thickness is slightly less than 8mm (0.315"). Ream the shaft hole for larger diameter shafts.,
9x4.7 APC Slowflyer PropHobby-Lobby
8X6 APC SLOWFLYER PROP
Special thin, light, and wide blade shapes that work well on slowflyers. Prop shaft hole: 4.72mm (0.186"), hub thickness is slightly less than 8mm (0.315"). Ream the shaft hole for larger diameter shafts.,
8x6 APC Slowflyer Prop