Flying-Hobby
Logo 500 Kit W/Orange Painted FG Canopy (V-Bar Head + V Bar Syst
Features | Constant tail drive |
Rotor diameter | 1150 to 1190 mm |
Rotor blades | 500mm/520 mm |
Gear ratio main rotor | 8.7 to 12.8; Mod. 0.5 |
Weight | 2.2 kg and up |
Battery | 5S to 6S Lipo cells |
Superlight, extremely rigid mainframe:, The mainframe is made from glassfiber-reinforced polymer material and manufactured by injection moulding. An advantage of this type of mainframe is that it allows for much greater freedom in designing than is the case with a mainframes which are assembled by screwing flat carbon parts together. Consider the placement of the servos for example. We have integrated the three (standard- or midsize) swashplate servos into the frame by providing slots for each one. In this way the servos are very easy to install and the linkages can be kept short and perfectly aligned. Also the entire mainframe is optimized for weight and extremely rigid at the same time., Herringbone main gear:, Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter., Its main advantages are:, Considerably more transmission efficiency, Specifications:,
This is the Logo 500 V-Bar Flybarless version kit with the V-Bar Flybarless system bundle.
Like the DX version, LOGO 500 3D will perform excellent with a 5S pack. If equipped with a 6S pack however, you will go to a completely new dimension of heli flying. The kit includes several extras for 3D flying, such as all levers fully ball-raced, and aluminium swashplate.
We strive to give each of our helis its own individual look, while making sure they can be recognized as one of the same family. Mehran Tirooni, head of the design team at Mikado, has designed 4 individual canopies, one for each for the 4 new models in our new product line.
Very smooth running
Extremely low noise level
Fully ball-raced
Hollow 10 mm main rotor shaft
8 mm spindle shaft
lCarbon tail boom support
Thrustbearing set for tail rotor with steel hub
3D vertical and horizontal fins
Alu swashplate
Standard-size and midi-size servos can be used
CG can be determined exactly by adjusting battery position
Mikado Logo 500
Servo
1)
CCPM Servo
(Standard digital servo)
e.g. S9252 / DS610 /DS620
2)Rudder servo
(Standard digital servo)
e.g. BLS251 / DS620
Motor
Scorpion
HK-4025 1100KV
Scorpion HK-4020 1100KV
Electronic Speed Controllers
Phoenix
85HV / Scorpion 90A
Battery
Lipo cells (APLUS 6S1P 5000mAh) x1 or (
6
s
2800mAh)x2
Rotor blades
500mm
/520 mm
Gear ratio main rotor
8.7 to 12.8; Mod. 0.5
Check price and availability
Found 11 years, 2 months ago