RCModelScout.

GetFPV

EAGLEEYES FPV STATION WITH CASE

integrates four of the main components you need for model airplane FPV on the ground, at a cost that's lower than many of the individual components presently available! New: now includes clear plastic case with removable top, and mounts for the PowerPanel LCD display., FPV Station provides all of the following features:, Receiver Diversity, Here are the specifications:, Two video inputs,

GetFPV

DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER AND GPS/COMPASS

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,

GetFPV

DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER

Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,

GetFPV

DJI ZENMUSE H3-2D CAMERA GIMBAL FOR GOPRO 3

GetFPV

OPENPILOT CC3D FLIGHT CONTROLLER (PRE-ORDER)

Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers,

GetFPV

QAV500 BRUSHLESS GIMBAL UPGRADE (PRE-ORDER)

Gimbal Control Board:, We recommend the AlexMos board., Props:, Lipo:, A 5000mah 4s Lipo that is no wider than 51mm and no higher than 35mm (or it will not fit in the lipo compartment). We recommend HobbyKing Nano-Tech Lipos., GoPro protection:, The QAV540G gimbal that is part of this upgrade requires the GoPro to be placed into the gimbal without the GoPro case. We recommend you buy a separate, Shipping details:, When placing a pre-order, the entire order you place will be put on hold until the pre-ordered item is in stock and ready to ship. Please make a separate order for any additional items outside of the pre-order if you would like them to ship sooner, otherwise they will ship with your pre-order.,

GetFPV

QAV540G BRUSHLESS GIMBAL AIRFRAME (PRE-ORDER)

Landing Gear:, You can choose between the, Gimbal Control Board:, We recommend the AlexMos board., Lipo:, A 5000mah 4s Lipo that is no wider than 51mm and no higher than 35mm (or it will not fit in the lipo compartment). We recommend HobbyKing Nano-Tech Lipos., GoPro Lens Protection:, The QAV540G gimbal requires the GoPro to be placed into the gimbal without the GoPro case. We recommend a separate, Shipping details:, When placing a pre-order, the entire order you place will be put on hold until the pre-ordered item is in stock and ready to ship. Please make a separate order for any additional items outside of the pre-order if you would like them to ship sooner, otherwise they will ship with your pre-order.,

GetFPV

OSD PRO PKG WITH 100A ELOGGER/WIRE LEADS AND GPS

There are lots of OSD choices out there. Here are a few reasons why the OSD Pro may be your best option:, Modularity:, If we come out with a newer version of one of the OSD Pro components, you only need to upgrade that component to have the latest and greatest system, rather than having to replace your entire OSD system when a new one comes along., Easy setup:, The OSD Pro is easy to configure exactly like you want it, with the included software., Stabilization:, with the new Guardian Stabilization Expander, the OSD Pro provides full model stabilization with no additional stabilization equipment to buy., Expandability:, Eagle Tree offers myriad sensors that are fully compatible with the OSD Pro. Since we make these sensors ourselves, you're guaranteed that they will be plug and play, with no soldering, finger pointing, or headaches., Powerful features:, The OSD Pro offers advanced features, such as Voice Alerts, Programmable Alarms, "RADAR" synthetic map, "Return to Home", RSSI and multiple battery voltage displays, built-in Flight Simulator for setup testing,Artifical Horizon display, acoustic variometer, waypoints, full Data Logging with GoogleEarth and graphing with the powerful software., World class support:, Eagle Tree has a full time, dedicated support staff, should you ever have a problem. They offer 24/7 support with their, Easy upgradability:, We are constantly adding new features and enhancements to the firmware. These are just a download away. The OSD Pro's built-in USB connection makes it easy to update firmware with the powerful software. No need to buy a separate USB adapter, build any special cables, or other complex steps for update., Part of a complete FPV system:, The OSD Pro is complimented by our EagleEyesTM Ground Station, and will soon be enhanced with the, for more details):, High speed logging at up to 50Hz (increased from 10Hz).,

GetFPV

TBS CAIPIRINHA FPV FLYING WING

: A complete list of required equipment is included in the,

GetFPV

HOVERTHINGS "FLIP FPV" FRAME (BLACK)

GetFPV

HOVERTHINGS "FLIP FPV" FRAME (BLACK/ORANGE)

GetFPV

DJI FLAMEWHEEL F550 BASIC KIT

,

GetFPV

DJI FLAMEWHEEL F550 ARF KIT

,

GetFPV

DJI FLAMEWHEEL F450 BASIC KIT

,

GetFPV

DJI FLAMEWHEEL F450 ARF KIT

,