ReadyMadeRC
TAROT 2 AXIS CAMERA GIMBAL FOR GOPRO HERO3, 3+ W/FREE CABLE
| 7. Supported receiver type | conventional/S-BUS/DSM2/DSMJ/DSMX receiver. |
| 8. Supported RC | PPM/PCM/2.4G. |
| 9. Operating supply | DC 7.4V~14.8V (Li-Po 3S is recommended) |
| 10. Operating current | 200mA-500mA (Depending on power supply voltage and motor power) |
| 11. Operating temperature | -15ºC~65ºC. |
| 12. CPU | Double 32bit ARM |
| 13. Sensor technology | 3-axis MEMS gyro and accelerometer. |
| 14. Max angular rate | 2000 º /sec. |
| 15. Max acceleration | 16g. |
| 16. Control frequency | 2000Hz |
| 17. Motor driver frequency | 20KHz (quiet and smooth) |
| 18. Control accuracy | 0.1° |
| 19. Control range | -45º~45º(roll), -135 º~90 º(tilt). |
| 20. Attitude arithmetic | BLDC gimbal dedicated brushless motor decoupled EKF algorithm. |
| 21. Aerial photography equipment | GOPRO Hero3. |
Note:, Modifications may be required to use HERO4, Parts included for the kit: 2 motors mounted onto the swing arms, gimbal controller board, mounting bracket with GoPro brace, 2 male to male servo cables (one with Y end), USB firmware updater connector and cable, 4 rubber dampeners and mounting bracket + hardware for the gimbal.,
FREE LIVE VIDEO OUT CABLE OPTION...YES, OUR CABLES WILL WORK ...ReadyMadeRC
GAUI 500X QUAD COMBO W/SCORPION MOTORS, ESC, GU-344, BAG, FRAME
| Dimension | (64) |
| Dimension | (?) |
500X was designed based on UAV, advantages are:, , 1. Flight Efficiency: Standard Battery (2S2000mAh) time of flight for more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation), 2. Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft, 3. High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle., 4. Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs), you can install cameras and video recorder, and other system., Note: For users who have transplanted GAUI 330X / 330X-S power systems (motors, ESCs) to the 500X Upgrade kit, please use 8 inch propellers., Powered by:, , : type, Product packing:, , Export Carton (LNK):, , Manual:, , * The payload calculations and the battery options :, Ex 1: If the 500X carries a HD Camera (weight 350g) and uses a 3S/2000mah LiPo(weight 150g),the flying weight is 1170g (670+350+150).The power consumption in this condition is 141w(as table above).The Power of this battery is 11.1(V) * 2(A) * 60(Min.) = 1332.The flying time is about 7.1(Min.)Calculation : (1332 / 141) * 75%(Bat. Factor) = 7.1 (Min.) Ex 2: If the 500X uses 2pcs of 3S/2000mah LiPo(in parallel), the flying weight is 1050g (670+350+ 150X2).The power consumption in this condition is 167w(as table above).The total Power of the batteries is 11.1(V) * 2(A) * 60(Min.) * 2 (Bat. in parallel)= 2662.The flying time is about 12(Min.) Calculation : (2662 / 167) * 75%(Bat. Factor) = 12 (Min.)", CAUTION : The Power Consumption Table is calculated based on cruising, the ESC output current may increase 3 or 4 times more for flying mode other than cruising due to increased power output. Make sure to check flyin,
CAN NOT BE BACK-ORDERED 500X Quad Flyer Combo Kit (Including ...ReadyMadeRC
GAUI 500X QUAD COMBO INC MOTORS, ESC, GU-344, BAG, FRAME
| Dimension | (64) |
| Dimension | (?) |
500X was designed based on UAV, advantages are:, , 1. Flight Efficiency: Standard Battery (2S2000mAh) time of flight for more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation), 2. Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft, 3. High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle., 4. Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs), you can install cameras and video recorder, and other system., Note: For users who have transplanted GAUI 330X / 330X-S power systems (motors, ESCs) to the 500X Upgrade kit, please use 8 inch propellers., Powered by:, , : type, Product packing:, , Export Carton (LNK):, , Manual:, , * The payload calculations and the battery options :, Ex 1: If the 500X carries a HD Camera (weight 350g) and uses a 3S/2000mah LiPo(weight 150g),the flying weight is 1170g (670+350+150).The power consumption in this condition is 141w(as table above).The Power of this battery is 11.1(V) * 2(A) * 60(Min.) = 1332.The flying time is about 7.1(Min.)Calculation : (1332 / 141) * 75%(Bat. Factor) = 7.1 (Min.) Ex 2: If the 500X uses 2pcs of 3S/2000mah LiPo(in parallel), the flying weight is 1050g (670+350+ 150X2).The power consumption in this condition is 167w(as table above).The total Power of the batteries is 11.1(V) * 2(A) * 60(Min.) * 2 (Bat. in parallel)= 2662.The flying time is about 12(Min.) Calculation : (2662 / 167) * 75%(Bat. Factor) = 12 (Min.)", CAUTION : The Power Consumption Table is calculated based on cruising, the ESC output current may increase 3 or 4 times more for flying mode other than cruising due to increased power output. Make sure to check flyin,
CAN NOT BE BACK ORDERED 500X Quad Flyer Combo Kit ...ReadyMadeRC
GAUI 500X QUAD COMBO INC MOTORS, ESC, BAG, FRAME, NO GU-344
| Dimension | (64) |
| Dimension | (?) |
500X was designed based on UAV, advantages are:, , 1. Flight Efficiency: Standard Battery (2S2000mAh) time of flight for more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation), 2. Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft, 3. High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle., 4. Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs), you can install cameras and video recorder, and other system., Note: For users who have transplanted GAUI 330X / 330X-S power systems (motors, ESCs) to the 500X Upgrade kit, please use 8 inch propellers., Powered by:, , : type, Product packing:, , Export Carton (LNK):, , Manual:, , * The payload calculations and the battery options :, Ex 1: If the 500X carries a HD Camera (weight 350g) and uses a 3S/2000mah LiPo(weight 150g),the flying weight is 1170g (670+350+150).The power consumption in this condition is 141w(as table above).The Power of this battery is 11.1(V) * 2(A) * 60(Min.) = 1332.The flying time is about 7.1(Min.)Calculation : (1332 / 141) * 75%(Bat. Factor) = 7.1 (Min.) Ex 2: If the 500X uses 2pcs of 3S/2000mah LiPo(in parallel), the flying weight is 1050g (670+350+ 150X2).The power consumption in this condition is 167w(as table above).The total Power of the batteries is 11.1(V) * 2(A) * 60(Min.) * 2 (Bat. in parallel)= 2662.The flying time is about 12(Min.) Calculation : (2662 / 167) * 75%(Bat. Factor) = 12 (Min.)", CAUTION : The Power Consumption Table is calculated based on cruising, the ESC output current may increase 3 or 4 times more for flying mode other than cruising due to increased power output. Make sure to check flyin,
CAN NOT BE BACK ORDERED 500X Quad Flyer Combo Kit ...ReadyMadeRC
DJI FLAME WHEEL F550 ARF KIT INCLUDES MOTORS, ESC & PROPELLERS
| MSRP | $126 F550 User Manual v1.0： |
| Stator size | 22x12mm |
| Current | 30A OPTO |
| Signal Frequency | 30Hz ~ 450Hz |
| Battery | 3S ~ 4S LiPo |
| Dimensions | 10 x 4.5 in; 8 x 4.5 in |
| Provide different color frame arms | red, white, black, which makes your flight more colorful. |
Includes:, 6× ESC(30A), 6× Motor(2212), 6× blades(10inch), 1× complete frame, Flame Wheel F550 ARF Kit Includes:, , KV: 920 rpm/V,
Flame Wheel F550 ARF Kit set $390 FlameWheel series is ...ReadyMadeRC
DJI FLAME WHEEL F450 ARF KIT INCLUDES MOTORS, ESC & PROPELLERS
| MSRP | $80 |
| Stator size | 22x12mm |
| Current | 30A OPTO |
| Signal Frequency | 30Hz ~ 450Hz |
| Battery | 3S ~ 4S LiPo |
| Dimensions | 10 x 4.5 in; 8 x 4.5 in |
| Provide different color frame arms | red, white, black, which makes your flight more colorful. |
Includes:, 4× ESC(30A), 4× Motor(2212), 4× blades(8inch), 4× blades(10inch), 1× complete frame, Flame Wheel F450 ARF Kit Includes:, , KV: 920 rpm/V,
Flame Wheel F450 ARF Kit set $240 FlameWheel series is ...ReadyMadeRC
DJI FLAME WHEEL F330 ARF KIT INCLUDES MOTORS, ESC & PROPELLERS
| Frame Only MSRP | $50 |
| Stator size | 22x12mm |
| Current | 30A OPTO |
| Signal Frequency | 30Hz ~ 450Hz |
| Battery | 3S ~ 4S LiPo |
| Dimensions | 10 x 4.5 in; 8 x 4.5 in |
| Provide different color frame arms | red, white, black, which makes your flight more colorful. |
Includes:, 4× ESC(18A), 4× Motor(2212) ,4× blades(8inch) ,1× complete frame, Flame Wheel F330 ARF Kit Includes:, , KV: 920 rpm/V,
Flame Wheel F330 ARF Kit set $218 FlameWheel series is ...ReadyMadeRC
PENGUIN V2 KIT +M2815 MOTOR (HARDWARE INCLUDED, NO ELECTRONICS)
| Wingspan | 1720MM/67.7inch |
| Length | 1230MM/48.5inch |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless motor M2220 Kv1350 or M2815 KV1280 |
| ESC | 40A for M2220 or 60A for M2815 |
| Servo | 3pcs 17g servo+ 1pcs 9g servo. |
| Battery | Li-Po 11.1V 2400 mAh for M2220 and 5000mAh for M2815 |
| Static Thrust | Motor M2220 1.5Kg/53.0oz. |
| Payload | 600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight) |
| Material | EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe |
| Part No | FUP1201 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
| Part No | FUP1202 |
| Part No | FUP1203 |
| Part No | FUP1204 |
| Part No | FUP1205 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
ARF Weight: 0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Forum Discussions:, , WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount. There are a few choices sold separately:, , Penguin Packages Available:, , Finwing Penguin Features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,
Penguin Kit +M2815 Motor Motor M2815 1.95kg/69oz, Max.flight weight more ...ReadyMadeRC
PENGUIN V2 KIT +M2220 MOTOR (HARDWARE INCLUDED, NO ELECTRONICS)
| Wingspan | 1720MM/67.7inch |
| Length | 1230MM/48.5inch |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless motor M2220 Kv1350 or M2815 KV1280 |
| ESC | 40A for M2220 or 60A for M2815 |
| Servo | 3pcs 17g servo+ 1pcs 9g servo. |
| Battery | Li-Po 11.1V 2400 mAh for M2220 and 5000mAh for M2815 |
| Static Thrust | Motor M2220 1.5Kg/53.0oz. |
| Payload | 600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight) |
| Material | EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe |
| Part No | FUP1201 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
| Part No | FUP1202 |
| Part No | FUP1203 |
| Part No | FUP1204 |
| Part No | FUP1205 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
ARF Weight: 0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Forum Discussions:, , WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount. There are a few choices sold separately:, , Penguin Packages Available:, , Finwing Penguin Features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,
Penguin Kit with M2220 Motor Motor M2815 1.95kg/69oz, Max.flight weight ...ReadyMadeRC
PENGUIN V2 ARF WITH M2815 MOTOR AND 60A ESC W/SWITCHMODE BEC
| ATTENTION | According to |
| Wingspan | 1720MM/67.7inch |
| Length | 1230MM/48.5inch |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless motor M2220 Kv1350 or M2815 KV1280 |
| ESC | 40A for M2220 or 60A for M2815 |
| Servo | 3pcs 17g servo+ 1pcs 9g servo. |
| Battery | Li-Po 11.1V 2400 mAh for M2220 and 5000mAh for M2815 recommended |
| Static Thrust | Motor M2220 1.5Kg/53.0oz. |
| Payload | 600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight) |
| Material | EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe |
| Part No | FUP1205 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
| 60A ESC Programming manual | HERE |
ARF Weight: 0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Forum Discussions:, RCGroups, WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount. There are a few choices sold separately:, , Finwing Penguin Features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
PENGUIN V2 ARF WITH M2220 MOTOR AND 40A ESC
| ATTENTION | According to |
| Wingspan | 1720MM/67.7inch |
| Length | 1230MM/48.5inch |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless motor M2220 Kv1350 or M2815 KV1280 |
| ESC | 40A for M2220 or 60A for M2815 |
| Servo | 3pcs 17g servo+ 1pcs 9g servo. |
| Battery | Li-Po 11.1V 2400 mAh for M2220 and 5000mAh for M2815 recommended |
| Static Thrust | Motor M2220 1.5Kg/53.0oz. |
| Payload | 600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight) |
| Material | EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe |
| Part No | FUP1201 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
ARF Weight: 0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Forum Discussions:, RCGroups, WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount. There are a few choices sold separately:, , Finwing Penguin Features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
FINWING PENGUIN ADJUSTABLE MOTOR MOUNT
| Position 1 | stock height up to a 9" prop. |
| Position 2 | (+) 0.47" for up to a 10" prop. |
| Position 3 | (+) .95" for up to an 11" prop. |
| Position 4 | (+) 1.42" for up to a 12" prop. |
| Total Weight | 38g |
Installation Instructions:, Take the stock wood mount and draw 2 lines going through the existing mounting holes to form an X. This is shown in the attached photos., Included:, 1 - Penguin Base Tube and SSS Motor Plate, 4 motor screws, 4 motor plate screws, 4 base tube screws., Notes:, The stock thrust angles are retained in all 4 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Acceptable bolt patterns (units in mm):, 19x19,
This two piece mount is CNC machined from billet aluminum. ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) WITH MOTOR, ESC, AND SERVOS
| ATTENTION | According to |
| Wingspan | 2520MM/ 99.2inch |
| Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
| Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
| Customized Motor for Airtitan | M60K/ Power 1500W |
| Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
| Propeller recommend | 15*6 / 15*7 |
| ESC | Advanced 80A OPTO (without Built-in BEC) |
| External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
| Material of fuselage and Wing | EPO |
| RMRC 6s batteries found here | 10,000 mAh |
| Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
| Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Sample Battery Setup:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, ,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
RMRC ANACONDA - PNP (WITH INSTALLED MOTOR, ESC, AND SERVOS)
| Wingspan | 2,060mm |
| Wing Area | Approx. 4,900cm |
| Length | 1,410mm |
| Motor | RMRC Tiger Motor Brushless Outrunner AT3520-5, 800kv (6mm prop adapter shaft) |
| Propeller (sold separately) | Recommend |
| ESC | RMRC Tiger Motor 80A ESC with switch mode BEC (T-Plug connector) |
| Servos | 3x 30g and 2x 17g Metal Gear Digital (does not include 2x servos for flaps) |
| Recommended Flap servos | HS-81 |
| Battery | Li-Po 4s 5,000mAH - 20,000mAH (Additional nose weight needed with smaller batteries) |
| Center of Gravity | 1/3 of wing from leading edge on the main spar |
| Approximate flight duration | 45 minutes to over an hour depending on configuration |
| Fuselage dimensions (Inside) | L 66cm (26.5") x W 15cm (6") x H 8cm (3") |
Features:, , Specifications:, , RMRC's Setup for the Anaconda:, , RcGroups.com Unboxing Video with Jim Graham:, , Looking inside the fuselage:, , Notes:, , Can be broken down for transport:, Picture courtesy of ducatirdr from RCGroups.com,
Anaconda PNP - with installed Motor, ESC, and Servos After ...ReadyMadeRC
MULTIPLEX EASY STAR 2 ADJUSTABLE ALUMINUM MOTOR MOUNT
| Position 1 | stock height up to a 7" prop. |
| Position 2 | (+) 0.41" for up to a 8" prop. |
| Position 3 | (+) 1.0" for up to an 9" prop. |
| Total Weight | 16g |
Three step installation:, Attach motor base plate to the stock plastic mount with 4 supplied pan head screws., Included:, 1 - EBS 2 Base Plate and EBS Motor Plate, 4 base screws, 4 motor screws, and 4 mount screws., Notes:, - The stock folding spinner can be utilized with different sized props and motosr with a 3mm or 3.17mm motor shaft.,
This CNC machined aluminum two piece mount is designed to ...