HiModel
T-REX 450SE(CDE) KIT +NEW 430L3550+35G ESC + 2100MAH LIPO (SILVER KX015046TA)
| ●Length | 650mm |
| ●Height | 230mm |
| ●Main Rotor | 680/700mm |
| ●Tail Rotor | 150mm |
| ●Motor Gear | 13T/11T |
| ●Main Gear | 150T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(without power system) | 365g |
| ●Weight(including power system) | 690g |
, , , , , , Specifications:, , , , , , , , , , , ●Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24, , ,
Features: 【Arrived with 80% pre-assembled】 T-Rex 450 Superior Edition (eCCPM) ...HiModel
T-REX 450SE(CDE) KIT +NEW 430L3550+35G ESC + 2100MAH LIPO (BLACK KX015047TA)
| ●Length | 650mm |
| ●Height | 230mm |
| ●Main Rotor | 680/700mm |
| ●Tail Rotor | 150mm |
| ●Motor Gear | 13T/11T |
| ●Main Gear | 150T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(without power system) | 365g |
| ●Weight(including power system) | 690g |
, , , , , , Specifications:, , , , , , , , , , , ●Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24, , ,
Features: 【Arrived with 80% pre-assembled】 T-Rex 450 Superior Edition (eCCPM) ...HiModel
FY21AP FPV INERTIAL ATTITUDE STABILIZER(TRADE EDITION) FY-21AP
| Incorporating the AP117 OSD module transmits these parameters | *altitude |
| Additional data can be interfaced to your PC via the Data Radio Link Module upgrade | *longitude |
| Any other configuration, please e-mail us for enquiry | feiyudz@hotmail.com |
| Includes | FY21AP (2.0) Module |
Features:, , In addition, barometric pressure data allows precise altitude hold capability. Beyond providing stabilization for the RC Pilot, under any flight conditions, connections to our other modules allow enhancements such as:, *auto-return to launch site, The FY-21AP can be installed in the following aircrafts:, Normal / Traditional fixed-wing planes, Remote Control system requirement:, The FY-21AP has been tested to work with the following RC systems:, Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, Includes/Requires:, , Resources:, Download Software and instruction manual.,
1. Briefly introduce The FY21AP is a stand-alone autopilot system ...HiModel
FY31AP PATH NAVIGATION & HORNET OSD COMBO
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Includes | 1 x FY-31AP |
Features:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, • Level flight - When stabilization is activated, the FY31AP will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, • First Person View (FPV) - by connecting this interface to the FY-OSD, telemetric data such as GPS, flight navigation, AHI can be displayed on your downlink video.On the other hand, it will be easier to operate FPV with the functions of automaticbalanceand automated return to home., • FY-31AP module:, • GPS module:, The FY-31AP can be installed in the following aircraft :, 1. Normal / Traditional fixed-wing planes;, The FY-31AP has been tested to work with the following RC systems:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, Includes/Requires:, ,
1. Attitude Flight Stabilization System (AFSS) FY31-AP is an inertial ...1 Reviews
HiModel
GWS PG-03 PIEZO GYRO
| Size | 26*27*11.3mm |
| Weight | 7.0g（0.28oz） |
| Power Supply | 4.8V-6V |
| Current Draw | 10ma（4.8V） |
| Gain Adjustment | Single rate, non-remote |
| Operating Temperature | －5�～60�C |
| Applicable R/C System | FUTABA, JR, SANWA/Airtronics, HI-TEC, Multiplex, GWS etc. |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: The PG-03 has been designed using a new micro ...HiModel
SK 130 AR ACRO ENGINE W/MUFFLER
| Prop shaft diameter | 9.45mm/ 0.37 inch |
| Suitable Prop | 16x 6 / 17x 6 |
| Distance between mounting holes on same side | 0.98" (25mm) |
| Distance between mounting holes on opposite side | 2.3" (58.4mm) |
| Height from bottom of crankcase to top of cylinder head | 4.6" (116.8mm) |
| Height from center of crankcase to top of cylinder head | 3.5" (89mm) |
| Width at mounting flanges | 2.75" (69.85mm) |
| Width at crankcase | 1.8" (45.72mm) |
, , , , , , Specifications:, , , , , , , , , , , weight：730g / 25.75oz (without muffler); 980g/ 34.57oz（with muffler）, MOUNTING DIMENSIONS:, , ,
Features: The SK line of engines is produced in our ...HiModel
40MHZ CORONA SYNTHESIZED 4CH RECEIVER (SINGLE CONVERSION) RP4S1
, , , , , , Specifications:, , , , , , , , , , , Synthesized Receiver (single conversion), , Type, , RP4S1, , Size, , 42.5x18.2x9.36mm, , Weight, , 6.6g, , Sensitivity, , better than 2.0μv, , Selectivity, , ±8 kHz at 65 dBdown, , Number of Channel, , 1-4, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 pole ceramic filter, , Filtering, , DSP filtering with mild algorithm, , Shift Polarity, , Positive or Negative(auto-detect), , Case, , Shrink wrap, , operating voltage, , 4.8V～6.0VDC, , operating current, , 17mA, , Modulate, , FM/PPM, , Range, , >1.2km/3900ft, , Filtering, , DSP, , Crystal size, , UM-5, , Intermediate Frequency, , 455KHZ, , IP3, , +9dBm, , , ,
Features: The smallest synthesized receiver in the R/c world Corona ...1 Reviews
HiModel
72MHZ CORONA SYNTHESIZED 4CH RECEIVER (SINGLE CONVERSION) RP4S1
, , , , , , Specifications:, , , , , , , , , , , Synthesized Receiver (single conversion), , Type, , RP4S1, , Size, , 42.5x18.2x9.36mm, , Weight, , 6.6g, , Sensitivity, , better than 2.0μv, , Selectivity, , ±8 kHz at 65 dBdown, , Number of Channel, , 1-4, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 pole ceramic filter, , Filtering, , DSP filtering with mild algorithm, , Shift Polarity, , Positive or Negative(auto-detect), , Case, , Shrink wrap, , operating voltage, , 4.8V～6.0VDC, , operating current, , 17mA, , Modulate, , FM/PPM, , Range, , >1.2km/3900ft, , Filtering, , DSP, , Crystal size, , UM-5, , Intermediate Frequency, , 455KHZ, , IP3, , +9dBm, , , ,
Features: The smallest synthesized receiver in the R/c world Corona ...1 Reviews
HiModel
35MHZ CORONA SYNTHESIZED 4CH RECEIVER (SINGLE CONVERSION) RP4S1
, , , , , , Specifications:, , , , , , , , , , , Synthesized Receiver (single conversion), , Type, , RP4S1, , Size, , 42.5x18.2x9.36mm, , Weight, , 6.6g, , Sensitivity, , better than 2.0μv, , Selectivity, , ±8 kHz at 65 dBdown, , Number of Channel, , 1-4, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 pole ceramic filter, , Filtering, , DSP filtering with mild algorithm, , Shift Polarity, , Positive or Negative(auto-detect), , Case, , Shrink wrap, , operating voltage, , 4.8V～6.0VDC, , operating current, , 17mA, , Modulate, , FM/PPM, , Range, , >1.2km/3900ft, , Filtering, , DSP, , Crystal size, , UM-5, , Intermediate Frequency, , 455KHZ, , IP3, , +9dBm, , *This is not a full range receiver, and only suggested to use for small electric models like park flyers etc., , ,
Features: The smallest synthesized receiver in the R/c world Corona ...2 Reviews
HiModel
FUTABA STANDARD 25T CNC ALUMINUM SINGLE SIDE ARM - RED
| Overall length | 35.6mm |
| Mounting holes spacing | at 9, 19, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , Futaba Standard 25T CNC Aluminum Single Side Arm SO004 - red, the outter two holes are threaded., * Fits the FUTABA servos with splined output shafts., , ,
Features: There are two screws designed to hold the arm ...HiModel
2.4G CORONA DSSS 8-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER (RF CT8F DSSS,RX CR8D) V2
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 100Ma |
| Resolution | 10bit |
, , , , , , Specifications:, , , , , , , , , , , Specification For Transmitter Module type CT8F, Output Power---- 10mW-60mW, Specification for Receiver, CR8D---- Fast Spread 2.4G Receiver work with Corona RF.Module, Operating Voltage Range --- 4.8V-6V, Operating Current --- 30Ma, Specified Range --- 1.5km, Resolution ---10 bit, Latency ---- 22ms, Sensitivity -- -100dbm, Channel --- 8CH, , ,
Features: When you plan to update your Futaba/HITEC/WFLY FM Transmitter ...3 Reviews
HiModel
2.4G CORONA DSSS 8-CHANNEL RF MODULE & RX SYSTEM FOR JR TRANSMITTER (RF CT8J, RX CR8D) V2
| Type | CT8J 2.4G DSSS |
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 100Ma |
| Resolution | 10bit |
, , , , , , Specifications:, , , , , , , , , , , Specification For Transmitter Module, Specification for Receiver, CR8D---- Fast Spread 2.4G Receiver work with Corona RF.Module, Operating Voltage Range --- 4.8V-6V, Operating Current --- 30Ma, Specified Range --- 1.5km, Resolution ---10 bit, Latency ---- 22ms, Sensitivity -- -100dbm, Channel --- 8CH, , ,
Features: When you plan to update your JR FM Transmitter ...2 Reviews
HiModel
2.4G JR DSX9MK II 9-CHANNEL DSM2 RADIO (BACKLIGHT) W/RD921 RX (NO SERVO)
| -Method | DSM2 |
| -Number of Channels | 9Ch |
| -Transmitter Weight | 810g (excluding battery) |
| - Stick mode | mode 2 (throttle on left hand) will be sent by default, mode 1 is available upon request. |
, , , , , , Specifications:, , , , , , , , , , , * We only accept bank wire transfer (T/T) or western union money transfer for new customers for this product., *, Technical_hints_2.4G.pdf Technical hints on usage of 2.4G radios., , , ,
Features: JR Propo DSX9II Transmitter - Multi-Data Graphic Display with ...