RCModelScout.

HobbyKing

BIXLER V1.1 EPO 1400MM (RTF MODE 2 THROTTLE LEFT RADIO)

Specs:, Motor:, 2620-1900kv Brushless Outrunner, Includes:, 2.4ghz Radio (Mode 2 - Throttle Left, 4 Channel) & 6 Channel Receiver, Requires:, 8 x AA Dry Cell Battery for TX,

HobbyKing

BIXLER V1.1 EPO 1400MM (RTF MODE 1 THROTTLE RIGHT RADIO)

Specs:, Motor:, 2620-1900kv Brushless Outrunner, Includes:, 2.4ghz Radio (Mode 1 - Throttle on right, 4 Channel) & 6 Channel Receiver, Requires:, 8 x AA Dry Cell Battery for TX,

HobbyKing

BIXLER V1.1 EPO 1400MM - (ARF)

Specs:, Motor:, 2620-1900kv Brushless Outrunner (Included), ESC:, 20A w/BEC (Required),

HobbyKing

HOBBYKING BIXLER V1.1 EPO 1400MM (KIT)

Specs:, Material:, EPO, Motor:, 2620-1900kv Brushless, :, 20A w/BEC (Required), Required:, 4 Channel Radio (Tx/Rx),

HobbyKing

DIY BIXLER FPV CAMERA MOUNT

,

HobbyKing

HOBBYKING BIXLER 2 EPO 1500MM W/OPTIONAL FLAPS (KIT)

Note:, This is the "KIT" version only with no electronics., Features:, Kit Version allows user to choose their own electronic equipment, Specs:, Required:, 1 x 26~28 Size 1300kv Brushless Motor,

HobbyKing

HOBBYKING BIXLER 2 EPO 1500MM W/ BRUSHLESS MOTOR, SERVOS AND OPTIONAL FLAPS (ARF)

Specs:, Motor:, 2620-1300kv Brushless Outrunner (Included),

HobbyKing

PIN HORNS L41XW12XH9.5 (SUIT BIXLER 2)(10SETS)

ReadyMadeRC

SKY SURFER FPV PAN/TILT POD KIT (FITS BIXLER V1)

When purchased with the pan/tilt kit, comes with a mounting plate that will fit many popular FPV cameras including:, , Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit will include*:, , Other options include:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required.  The system was designed for TG9e or HS-65HB servos.  Any other servo must be aligned properly for proper gear engagement., You'll need to supply:, , Manual:, Sky Sufer Pod Instructions,

ReadyMadeRC

EASY STAR/SKY SURFER/BIXLER ADJUSTABLE MOTOR MOUNT

Three step installation:, , Included:, 1 - Motor Base Tube and Motor Plate, 4 motor screws and 4 mount screws., Notes:, A 35mm outrunner motor will only fit in Position 3 (+ 1.0"). 28mm outrunners will work in any of the three positions. The stock thrust angles are retained in all 3 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Compatible Motors:, , Acceptable bolt patterns (units in mm):, 16x16, 16x19, 19x19, 19x25, 25x25,

DPCAV

FPV POD PAN & TILT KIT FOR SKY SURFER / BIXLER

The kit comes with two R/C servos, so it is a fantastic value. The provided camera mounting plate will fit many popular CCD cameras including:, DPC-171, DPC-520S, KX131, KX171, KX191 and others. An optional back plate is available that converts this kit for use with the DPC-420A, DPC-480A, and DPC-540A OSD cameras (, The kit includes:, Laser cut plywood components, You'll need to supply:, Double sided servo tape, Note: The video transmitter, camera, and battery are not included. They are shown in the photos for reference only.,

HobbyKing

HOBBYKING BIXLER 2 EPO 1500MM - REPLACEMENT MAIN WING

,

HobbyKing

HOBBYKING BIXLER 2 EPO 1500MM - REPLACEMENT DECAL

,

HobbyKing

HOBBYKING BIXLER 2 EPO 1500MM - REPLACEMENT FLAP HINGES (6PCS/BAG)

,

HobbyKing

HOBBYKING BIXLER 2 EPO 1500MM - REPLACEMENT VERTICAL STABILIZER

,