SDSHobby
EME 120CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 120cc |
| Weight | 2400g /engine, 160g/muffler, 150g/ignition |
| Carburetor | EME |
| Compression Ratio | 7.6 |
| Power | 12.2HP@7000RPM |
| Practical RPM | 1100~7200RPM |
| Thrust 1 | 27.2kgf (50~200M altitude) |
| Thrust 2 | 24.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades 28*10, 28*12, 29*10 prop, or 27*12 3 blades prop |
Specifications:, Package Contents:, EME120 engine*1pcs,
Muffler*2pcs Ignition module*1pcs Spark plug*2pcs Stand-off spacer*4pcs Muffler screw*4pcs Muffler ...SDSHobby
EME60 60CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 60cc |
| Weight | 1390g/engine, 180g/muffler, 140g/ignition module |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 6.2HP@7200RPM |
| Idle RPM | 1350RPM |
| Practical RPM | 1350~7500RPM |
| Thrust 1 | 16.2kgf (50~200M altitude) |
| Thrust 2 | 14.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 23*10, 24*8, 24*10(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME60 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
EME35 35CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 35cc |
| Weight | 960g/engine, 45g/muffler, 140g/ignition |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 3.6HP@7100RPM |
| Idle RPM | 1550RPM |
| Practical RPM | 1550~7500RPM |
| Thrust 1 | 9.0kgf (50~200M altitude) |
| Thrust 2 | 8.1kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 18*10, 19*10, 20*8(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME 35 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
BELT-CP ELECTRIC HELICOPTER RTF WITH EURO STANDARD 72MHZ LEFT HAND RADIO CONTROL WHITE
| Length | 650mm |
| Height | 230mm |
| Main Rotor Blade Diameter | 680mm |
| Tail Rotor Blade Diameter | 130mm |
| Motor Gear | 10T |
| Main Drive Gear | 140T |
| Tail Autorotation Gear | 110T |
| Flying Weight | approx 670g (with battery) |
| LiPo Battery | 1800mAh /11.1V |
| Brushless Motor | 450KV |
| Brushless ESC | 25A |
| Gyro | 1pcs |
| Servo | 8g *4pcs |
| Transmitter | 6-channel or more (helicopter system) Euro Standard left hand |
| Receiver | 6-channel or more |
Specifications and Equipments:, Drive Gear Ratio: 10: 140/110: 22,
SDSHobby
BELT-CP ELECTRIC HELICOPTER RTF WITH EURO STANDARD 72MHZ RIGHT HAND RADIO CONTROL WHITE
| Length | 650mm |
| Height | 230mm |
| Main Rotor Blade Diameter | 680mm |
| Tail Rotor Blade Diameter | 130mm |
| Motor Gear | 10T |
| Main Drive Gear | 140T |
| Tail Autorotation Gear | 110T |
| Flying Weight | approx 670g (with battery) |
| LiPo Battery | 1800mAh /11.1V |
| Brushless Motor | 450KV |
| Brushless ESC | 25A |
| Gyro | 1pcs |
| Servo | 8g *4pcs |
| Transmitter | 6-channel or more (helicopter system) Euro Standard Right Hand |
| Receiver | 6-channel or more |
Specifications and Equipments:, Drive Gear Ratio: 10: 140/110: 22,
SDSHobby
BELT-CP ELECTRIC HELICOPTER RTF WITH EURO STANDARD 72MHZ RIGHT HAND RADIO CONTROL WHITE
Specifications and Equipments:, Length:, 650mm, Height:, 30mm, Main Rotor Blade Diameter:, 680mm, Tail Rotor Blade Diameter:, 130mm, Motor Gear:, 10T, Main Drive Gear:, 140T, Tail Autorotation Gear:, 110T, Drive Gear Ratio:, 10: 140/110: 22, Flying Weight:, approx 670g (with battery), LiPo Battery:, 1800mAh /11.1V, Brushless Motor:, 450KV, Brushless ESC:, 5A, Gyro:, 1pcs, Servo:, 8g *4pcs, Transmitter:, 6-channel or more (helicopter system), Receiver:, 6-channel or more,
Euro Standard Right HandSDSHobby
FIBERGLASS PATRON SAINT RC GASOLINE BOAT/ RACING BOAT WITH JAPAN ZENOAH 29CC GAS ENGINE
| Hull Length | 133mm |
| Hull Width | 38mm |
| Hull Height | 21mm |
| Hull Speed | 70-75km/h |
| Hull Material | Fiberglass |
| Gross Weight | 14KG |
| Engine | Japan Zenoah 29CC Gas engine |
| Propeller | 6717 3 blades copper prop |
| Shaft System | D6.35 Shaft Jointer, D6.35mm Flexible Shaft, D6.35mm Drive Shaft without Teeth, D6.35mm Drive Dog |
| Radio Control System | 2.4G 2 channels or 3 channels (Our Item No. |
| Servo | 6kg-cm Throttle Servo, 15kg-cm Steering Servo with metal gears |
Specifications:, Recommended Equipments (need to buy separately):,
NOT Including ClutchSDSHobby
CNC CRRC GF55II 55CC TWIN CYLINDER GASOLINE ENGINE/PETROL ENGINE FOR RC AIRPLANE WITH WALBRO CARBURETOR
Specifications:, Displacement:, 55CC (27.2CC*2), Bore x Stroke:, 34mm*30mm, Weight:, 1780g, Carburetor:, Walbro (Diaphragm butterfly valve type), Maximum Output:, 5.6HP/7600RPM, RPM Range:, 1600-7800rpm, Ignition:, DC-CDI (4.8V), Gasoline-Version:, Pre-mixed Fuel, 25-40 (Gasoline):1, Lubrication Oil:, two-stroke engine oil, Propeller:, 0*12-23*8 Two blades prop (suggest using 22x8 prop), Cooling System:, Air Cooled, Included the Following Parts:,
(including CDI and Muffler) Engine*1pcs Washers*2pcs Installation Screw*8pcs Muffler*2pcs CDI ...SDSHobby
CRRCPRO GF26I 26CC GASOLINE ENGINE/PETROL ENGINE FOR RC AIRPLANE WITH WALBRO CARBURETOR
Specifications:, Displacement:, 6cc, Bore x Stroke:, 34mm*28.6mm, Weight:, 1194g, Carburetor:, Walbro (Diaphragm butterfly valve type), Maximum Output:, .4ps / 9000rmp, Speed range:, 1600-9500rpm, Ignition:, DC-CDI, Gasoline-Version:, Pre-mixed Fuel, 25-40 (Gasoline): 1, Lubrication Oil:, cycle engine oil, Propeller:, 16x8, 16x10, 17x8, 17x10 (Two blades prop), Cooling System:, Air Cooled, Included the Following Parts:,
(Including CDI and Muffler) Engine Walbro Carburetor Plug Spanner*2pcs CDI ...SDSHobby
CRRCPRO GF40I 40CC GAS ENGINE/PETROL ENGINE FOR RC AIRPLANE WITH WALBRO CARBURETOR
Specifications:, Displacement:, 40cc, Bore x Stroke:, 40mm x 31mm, Weight:, 1566g, Carburetor:, Walbro butterfly type w/pump, Max Output:, 3.95HP @ 7200 rpm, Ignition:, 4.8V - 6V DC-CDI, Fuel:, 93 plus octane premixed 25-35:1, Propeller:, 18 x 10, 20 x 8, 20 x 10 (Two blades), Included the Following Parts:,
(Including CDI and Muffler) Muffler and Electronic Ignition Included Engine ...SDSHobby
LUCKY OCT 34"/870MM ELECTRIC BRUSHLESS RACING BOAT 1126 WITH 3660 MOTOR, 120A ESC
| We recommend our radio set item No. | FS-GT2, FS-GT3B) |
Specifications:, Hull Length:, 880mm, Beam:, 20mm, Height:, 130mm, Hull Type:, Fiberglass Deep V, Motor:, 3660 KV2070 water cooled brushless, ESC:, water cooled brushless 120A, Propeller:, blades metal prop 5B11*38, Adjustable Stinger Drive:, Length=65mm, Dia.=4.76, Collect:, Length=32mm, Dia-B=4.76mm, Flexible Axle:, φ, Drive Dog:, φ, Drive Shaft:, φ, Recommended Equipments (Need to buy separately):, Battery:, 11.V 3S 4000mah 30C Lipo, Servo:, 1pcs*3kg, Radio Control:, -3 channels (,
4.76mm 4.76mm 4.76mmSDSHobby
SMASH SHARK P1 ELECTRIC BRUSHLESS RACING BOAT 1125 WITH 3660 MOTOR, 120A ESC
| We recommend our radio set item No. | FS-GT2, FS-GT3B) |
Specifications:, Hull Length:, 880mm, Beam:, 20mm, Height:, 130mm, Hull Type:, Fiberglass Deep V, Motor:, 3660 KV2070 water cooled brushless, ESC:, water cooled brushless 120A, Propeller:, blades metal prop 5B11*38, Adjustable Stinger Drive:, Length=65mm, Dia.=4.76, Collect:, Length=32mm, Dia-B=4.76mm, Flexible Axle:, φ, Drive Dog:, φ, Drive Shaft:, φ, Recommended Equipments (Need to buy separately):, Battery:, 11.V 3S 4000mah 30C Lipo, Servo:, 1pcs*3kg, Radio Control:, -3 channels (,
4.76mm 4.76mm 4.76mmSDSHobby
FIBERGLASS ARIANE RC GASOLINE BOAT/ RACING BOAT WITH QJ26CC GAS ENGINE
| 3 blade copper propeller with 6.35mm aperture and 67mm diameter (No | 6717) |
| .4G 2 channels or 3 channels (Our Item No. | FS-GT2, |
Specifications:, Hull Material:, fiberglass, Hull Speed:, 60-70km/h, Hull Size:, 1310*380*210 (mm), Engine:, QJ26CC gas engine, Propeller:, Recommended Equipments (need to buy separately):, Remote Control:, Servo:, 6kg-cm Throttle Servo, 15kg-cm Steering Servo with metal gears,
Including fuel tank and boat holder FS-GT3, FS-GT3B, FS-GT3C)SDSHobby
FIBERGLASS F3 ELECTRIC BRUSHLESS RC RACING BOAT 1127 WITH 3000 KV MOTOR + 70A ESC
| Hull Length | 630mm |
| Beam | 295mm |
| Motor | 3000KV brushless outrunner (Included) |
| ESC | 70A (Included) |
| Servo | S3003×3KG Servo (Included) |
| Propeller | 2 Blades Copper prop, 5B11*32 |
| Speed | 50-70km/h (depending on battery) |
| Receiver & Transmitter | 2 to 3 CH |
| Battery | Lipo 3S 3000 - 4000mAh Lipo battery |
| Charger | 2S to 6S balance charger can be used |
Specifications:, Height:, 150mm, Features:, Beautifully finished fiberglass hull, Recommended Equipments (Need to buy separately):,
Innovative outboard motor design Authentic race inspired paint scheme Powerful ...SDSHobby
270MM TAIWAN FOLDABLE SAW/ GARDEN SAW/ HANDING SAW/ CARPENTER SAW
| Blade length | 270mm |
| Length after folding | 290mm |
| Unfold Length | 550mm |
| Weight | about 0.31kg |
| Material | made of import Japan steel; three-side gear grinding technology; the saw balde is quite keen. |
Product Description:, Number of teeth: 61, Attention: The saw blade is not made of stainless steel. It needs some lubricating oil to maintain when not use in a long time.,
Our products use 65 manganese steel materials, with special heat ...