HobbyKing
JR RG1131B 11-CHANNEL FULL RANGE 2.4GHZ DMSS RECEIVER W/TELEMETRY
| Model | RG1131B |
| Modulation | DMSS |
| Band | 2.4GHz |
| Length | 48.5mm |
| Width | 32mm |
| Height | 14.5mm |
| Weight | 18.5g |
| Voltage Range | 4.5–8.5V |
| Antenna Length | 150mm |
Key Features:, • Designed for full range flight in any size model, Specs:, Type:, Full range aircraft receiver, Channels:11,
JR RG1131B 11-Channel Full Range 2.4GHz DMSS Receiver with telemetry. ...HobbyKing
JR XG8 8-CHANNEL 2.4GHZ DMSS TRANSMITTER W/RG831B RECEIVER (MODE 1)
| Modulation | DMSS |
| Band | 2.4GHz |
| Mode | Mode |
| Transmitter Battery | 6.4V 1400mAh Li-Fe |
| Model | RG831B |
| Type | Full range receiver |
| Modulation | DMSS |
| Band | 2.4GHz |
| Length | 48mm |
| Width | 25.5mm |
| Height | 14.5mm |
| Weight | 15g |
| Voltage Range | 4.5V~8.5V |
| Antenna Length | 150mm |
Standard XG8 System includes:, • RG831B 8CH DMSS 2.4GHz receiver, Key Features:, • Large, backlit screen, Transmitter Specs:, Channels:8, Receiver:, RG831B 8-channel full-range receiver, Programming Features:, Airplane, sailplane, helicopter, Model Memory:30, Receiver Specs:, Channels:8,
Using specifically developed JR® DMSS* technology, the all-new XG8 radio ...HobbyKing
JR XG8 8-CHANNEL 2.4GHZ DMSS TRANSMITTER W/RG831B RECEIVER (MODE 2)
| Modulation | DMSS |
| Band | 2.4GHz |
| Transmitter Battery | 6.4V 1400mAh Li-Fe |
| Model | RG831B |
| Type | Full range receiver |
| Modulation | DMSS |
| Band | 2.4GHz |
| Length | 48mm |
| Width | 25.5mm |
| Height | 14.5mm |
| Weight | 15g |
| Voltage Range | 4.5V~8.5V |
| Antenna Length | 150mm |
Standard XG8 System includes:, • RG831B 8CH DMSS 2.4GHz receiver, Key Features:, • Large, backlit screen, Transmitter Specs:, Channels:8, Receiver:, RG831B 8-channel full-range receiver, Programming Features:, Airplane, sailplane, helicopter, Model Memory:30, Mode:, Mode 1, 2, 3, 4 selectable - (mode 2 default), Receiver Specs:, Channels:8,
Using specifically developed JR® DMSS* technology, the all-new XG8 radio ...HobbyKing
JR TLS1-ROT TELEMETRY ROTATION SENSOR FOR XG SERIES 2.4GHZ DMSS TRANSMITTERS
| Detection Range | 300rpm~40,000rpm |
| Magnet Dimensions | 4mm x 2mm |
| Operating Voltage | 4.0V~8.5V |
| Includes | TLS1-ROT Sensor |
Specs:, Detection Method:, Magnetic detection system,
The JR TLS1-ROT Telemetry Rotation Sensor can provide you with ...HobbyKing
MULTIROTOR CF PROPELLER PAIR 17 X 5.5 LEFT AND RIGHT ROTATION TO SUIT PANCAKE MOTORS
| Diameter | 17 inches |
| Pitch | 5.5 inches |
| Rotation | Left and Right pair |
| Shaft Hole diameter | 5mm |
| Drive Hole diameter | 3mm |
Specs:, Spacing:, 7mm (center to center - Shaft hole to drive hole),
These propellers are specifically designed for multirotor use and for ...HobbyKing
MULTIROTOR CF PROPELLER PAIR 15 X 5.5 LEFT AND RIGHT ROTATION TO SUIT PANCAKE MOTORS
| Diameter | 15 inches |
| Pitch | 5.5 inches |
| Rotation | Left and Right pair |
| Shaft Hole diameter | 5mm |
| Drive Hole diameter | 3mm |
Specs:, Spacing:, 7mm (center to center - Shaft hole to drive hole),
These propellers are specifically designed for multirotor use and for ...5 Reviews
HobbyKing
TURNIGY HELIDRIVE SK3 COMPETITION SERIES - 2839-2700KV (450 SIZE HELI)
| Turns | 13T Delta |
| Voltage | 4S Lipoly |
| RPM/V | 2700kv |
| Internal resistance | 0.029 Ohm |
| Max Loading | 40A |
| Max Power | 550W |
| Shaft Diameter | 3.175mm |
| Shaft Length | 15.7mm |
| Screw Mounting Spacing | 16mm (M3x4) |
| Weight | 80g |
Motor Poles:6, Motor Plug:, 3.5mm Bullet Connector,
Turnigy SK3 Competition Series motors are the newest addition to ...5 Reviews
HobbyKing
TURNIGY HELIDRIVE SK3 COMPETITION SERIES - 2839-4300KV (450 SIZE HELI)
| Turns | 8T Delta |
| Voltage | 3S Lipoly |
| RPM/V | 4300kv |
| Internal resistance | 0.0155 Ohm |
| Max Loading | 60A |
| Max Power | 660W |
| Shaft Diameter | 3.175mm |
| Shaft Length | 15.7mm |
| Screw Mounting Spacing | 16mm (M3x4) |
| Weight | 79.5g |
Motor Poles:6, Motor Plug:, 3.5mm Bullet Connector,
Turnigy SK3 Competition Series motors are the newest addition to ...5 Reviews
HobbyKing
B-17G LIBERTY BELLE EPO 1875MM (PNF)
| Wingspan | 1875mm |
| Length | 1350mm |
| Flying Weight | 2750g |
| Esc | 4 x 20A ESC |
| Servos | 6 x 9g Servo |
| Landing Gear | Electric Retracts |
| Includes | All y-leads |
Specs:, Motor:, 4 x 700kv Brushless Outrunner Motor, Requires:, Your Own 6 Channel TX/RX,
This B-17G was purchased by aviation enthusiast Don Brooks, who ...5 Reviews
HobbyKing
CARBON FIBER PROPELLERS 11X5 LH AND RH ROTATION PAIR
Blades for Multi-rotor projects, they ..." />
| Diameter | 11 inch |
| Pitch | 5 inch |
| Hub thickness | 8mm |
| Shaft diameter | 6mm |
| Weight(each) | 15g |
Specs:,
These are some nice Carbon Blades for Multi-rotor projects, they ...HobbyKing
CARBON FIBER PROPELLERS 12X3.8 LH AND RH ROTATION PAIR
Blades for Multi-rotor projects, they ..." />
| Diameter | 12 inch |
| Pitch | 3.8 inch |
| Hub thickness | 8mm |
| Shaft diameter | 6mm |
| Weight(each) | 17g |
Specs:,
These are some nice Carbon Blades for Multi-rotor projects, they ...HobbyKing
CARBON FIBER PROPELLERS 12X6 LH AND RH ROTATION PAIR
Blades for Multi-rotor projects, they ..." />
| Diameter | 12 inch |
| Pitch | 6 inch |
| Hub thickness | 8mm |
| Shaft diameter | 6mm |
| Weight(each) | 19g |
Specs:,
These are some nice Carbon Blades for Multi-rotor projects, they ...HobbyKing
CARBON FIBER PROPELLERS 13X6.5 LH AND RH ROTATION PAIR
Blades for Multi-rotor projects, they ..." />
| Diameter | 13 inch |
| Pitch | 6.5 inch |
| Hub thickness | 8mm |
| Shaft diameter | 6mm |
| (each) | 16g |
Specs:,
These are some nice Carbon Blades for Multi-rotor projects, they ...HobbyKing
CARBON FIBER PROPELLERS 11X4.7 LH AND RH ROTATION PAIR
Blades for Multi-rotor projects, they ..." />
| Diameter | 11 inch |
| Pitch | 4.7 inch |
| Hub thickness | 8mm |
| Shaft diameter | 6mm |
| Weight(each) | 15g |
Specs:,
These are some nice Carbon Blades for Multi-rotor projects, they ...5 Reviews
HobbyKing
CARBON FIBER PROPELLERS 14X7 LH AND RH ROTATION PAIR
Blades for Multi-rotor projects, they ..." />
| Diameter | 14 inch |
| Pitch | 7 inch |
| Hub thickness | 8mm |
| Shaft diameter | 6mm |
| (each) | 24g |
Specs:,
These are some nice Carbon Blades for Multi-rotor projects, they ...