ReadyMadeRC
ZEISS CINEMIZER HD GLASSES + DJI LIGHTBRIDGE 2.4 HD VIDEO COMBO
| DC power input | 11-26V |
| Power consumption | 6W (without external USB equipment) Power consumption |
| DC power input | 11-26V |
| Power consumption | 8W (during normal use) |
| Ground unit | 125mm x 89mm x 20mm, |
| Air Unit | 67mm x 47mm x 20mm |
| Ground unit | 360g, |
| Air unit | 70g |
| 24 Bit RGB color depth- FoV (Field of View) | 30° |
| HDMI | 720p, 1080p and 3D (Frame Packing) |
| AV-In | 3,5mm / 4pin jack for audio & video (PAL/NTSC) |
| Battery-Box | 60 g, HDMI-Adapter 30 g |
Features:, 2.4G Full HD Digital Video Downlink, -Support for two remote controls: one for flight control (10 Channels) and the other for gimbal control(6 Channels). Control signals are received in the air and then transmitted to the flight controller through D-BUS., Specifications:, , It's Time to Upgrade:, It's time to move up to the most advanced and highest quality video glasses available for FPV! With features not seen in other popular FPV goggles such as diopter adjustment (for individuals that wear glasses), ear slider for comfort, and high resolution OLED displays, these are sure to be the new favorite for FPV'ers everywhere!, Display adjustments including:, , Aspect ratio 16:9,
Zeiss and DJI have joined forces to give you the ...ReadyMadeRC
F4U-1A CORSAIR PNP
| Wingspan | 44.0 in (1120mm) |
| Overall Length | 36.0 in (915mm) |
| Motor Size | 15-size 950Kv brushless outrunner (installed) |
| Radio | 4+ channel minimum radio system required (6+ for flaps and retracts) |
| Prop Size | 9.5 x 7.5 |
| Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po |
| Flaps | Optional |
| Retracts | Optional |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...ReadyMadeRC
PARKZONE - F4U-1A CORSAIR BNF PKZ6080
| Wingspan | 44.0 in (1120mm) |
| Overall Length | 36.0 in (915mm) |
| Motor Size | 15-size 950Kv brushless outrunner (installed) |
| Radio | AR600 6-channel DSMX® receiver (installed) |
| Prop Size | 9.5 x 7.5 |
| Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po (included) |
| Flaps | Optional |
| Retracts | Optional |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Charger | 2- to 3-cell DC variable rate Li-Po charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...ReadyMadeRC
PARKZONE - MOSQUITO MK VI BNF PKZ6350
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE - T-28 TROJAN PNP PKZ4475
| Aileron | 3/8 inch (9.5mm) |
| Elevator | 1/2 inch (13mm) |
| Rudder | 5/8 inch (16mm) |
| Aileron | 1/2 inch (13mm) |
| Elevator | 5/8 inch (16mm) |
| Rudder | 7/8 inch (22mm) |
| Wingspan | 44 in (1118mm) |
| Overall Length | 36 in (914mm) |
| Flying Weight | 30 oz (875 g) |
| Motor Size | PKZ 480 960Kv outrunner brushless motor |
| Radio | Minimum 4-channel recommended (not included) |
| Servos | 3-wire servos (included) |
| Trim Scheme Colors | White with black, red, and blue |
| Prop Size | 9.5 x 7.5 |
| Speed Control | E-flite 30A Pro Brushless ESC with Switch Mode BEC (EFLA1030) |
| Recommended Battery | Minimum 3-cell 1800mAh Li-Po battery (not included) |
| Scale | Warbird |
| Landing Gear | Wire nose gear and main gear, foam wheels |
| Steering | Steerable nose gear |
All that's needed to complete:, Radio, battery, charger, and receiver, All that's needed to complete:, Radio, battery, charger, and receiver, X-Port: No,
Powerful, High-Performance Historical Warbird Features Steerable nose gear and fixed ...ReadyMadeRC
MOSQUITO MK VI PNP
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
SPEKTRUM DX6 6 CHANNEL SYSTEM W/ AR610 RECEIVER
| Modulation | DSM2/DSMX |
| Band | 2.4GHz |
| Receiver | AR610 included |
| Model Memory | 250 |
| Modes | User Selectable Mode 1-4 |
| Transmitter (Tx) Battery Type | 4 AA batteries (Included) |
# of Channels: 6,
The Spektrum™ DX6 has been designed from the ground up ...ReadyMadeRC
PHOENIX R/C PRO SIMULATOR V5.0
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8/DX10T/DX18 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Features:, , Overview:, Whenever weather, schedules or circumstances conspire to keep you from the flying field, scratch your flying itch with the latest Phoenix Professional RC Flight Simulator, version 5.0. Stunning graphics and incredibly realistic physics have made the Phoenix simulator not only one of the best desktop flight simulators, but a virtual RC experience with just about all the benefits of an RC club and flying field. This newest version features definitively refined physics plus new companion software you can use to create your own models, fly them and then share them online. It’s always a perfect time to fly with the Phoenix Professional RC Flight Simulator., Tech Notes:, To successfully use Phoenix, you will need the following:, • IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, • An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, • Boot Camp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., supported:,
Improved airplane physics rebuilt from the ground up, plus industry-leading ...