DPCAV
GOPROHD HERO3 CAMERA CABLE FOR TX-5G8-600
White | Audio Left |
Orange | Video |
Red | 5V (camera charge/power) |
Brown | Common Ground |
The wire color codes are as follows:, ,
This lightweight A/V (audio/video) cable is used to connect the ...DPCAV
5.8GHZ A/V RECEIVER WITH ANTENNA DIVERSITY (V3)
Diversity Feature | Dual antenna inputs for Increased RF performance. |
RF Sensitivity | -90dBm typical. |
RF Input | 50 ohms. |
RF Channels | Seven (5740, 5760, 5780, 5800, 5820, 5840, 5860 MHz). |
Antenna Connector | SMA type. |
Audio Mode | Stereo (left / right channels). |
Audio Sub-carrier | 6.0 / 6.5 MHz. |
Alerts | Audible Low-battery alarm. |
Weight | 200 grams. |
Size | 80 x 100 x 23mm. |
Voltage | 6 - 13VDC / <500 mA (compatible with 3S LiPO batteries) |
Duo5800 V2/V3 Instruction Manual | Click Me! |
Features and Specifications (preliminary, subject to change):, , Frequency Summary List:, ,
The Duo5800v3 is a high performance 5.8GHz A/V receiver that ...DPCAV
5.8GHZ A/V RECEIVER (UNO5800-V2)
High RF Sensitivity | > -90dBm typical. |
RF Input | 50 ohms. |
RF Channels | Seven (5740, 5760, 5780, 5800, 5820, 5840, 5860 MHz). |
Antenna Connector | SMA type. |
Audio Mode | Stereo (left / right channels). |
Audio Sub-carrier | 6.0 / 6.5 MHz. |
Alerts | Audible Low-voltage alarm. |
Weight | 200 grams. |
Size | 2.8 x 3.3 x 0.9 inches (72 x 85 x 23 mm). |
Voltage | 6 - 13VDC / <250 mA. |
Datasheet | Click Me! |
):, , Frequency Summary List:, ,
The Uno5800-V2 is a high sensitivity 5.8GHz A/V receiver that ...BevRC
NEW SPIRONET 5.8GHZ PATCH ANTENNA
VSWR < 1.5 | 1 (5740 - 5860MHz) |
ReadyMadeRC
RMRC-PICO-WIDE-V2 (3.6-24V) COMPACT CAMERA NTSC
Sensor | 1/3" CMOS |
Pixels NTSC | NTSC:656×492 PAL:768×576 |
Resolution | 520TVL |
Lens View/Angle | 0.5mm F2.0 / |
Video Signal | 1Vp-p / 75 ohm |
Size | 11 x 11 x 22.5mm |
Weight | Only 3g! |
Voltage | 3.6V-24V DC |
Current | 45mA@12V |
Black | Ground |
Red | 3.6-24V DC |
Specs:, Includes a 5cm cable with a mini 3 wire camera plug, directly compatible with the following ReadyMadeRC cables:, ,
This is an super small camera with a great picture, ...ReadyMadeRC
REPLACEMENT LCD MODULE SET FOR AVIATOR/BASE GOGGLES
FatShark BASE ..." />
,
This is a LCD module set for the FatShark BASE ...ReadyMadeRC
RMRC-MINI-V2 (3.6-24V) COMPACT CAMERA NTSC
Sensor | 1/4" CMOS |
Pixels NTSC | 720H) x 480(V), PAL |
Resolution | 480 Horizontal TV-lines (480TVL) |
Lens View/Angle | F1.2/ 65° |
Video Signal | 1Vp-p / 75 ohm |
Size | 15.5x15.5x20mm |
Weight | Only 4g! |
Voltage | 3.6V-24V DC |
Current | 45mA@12V |
Yellow | Video |
Black | Ground |
Red | 3.6-24V DC |
ATTENTION: WE ARE CURRENTLY INVESTIGATING A POTENTIAL COMPATIBLITY ISSUE WITH THIS CAMERA AND SPECIFIC VOLTAGES AROUND 12V. AT THIS TIME WE ONLY RECOMMEND THIS CAMERA FOR 5V USE UNTIL WE CAN DETERMINE THE SPECIFICS OF THE COMPATIBILITY ISSUES WE'VE HAD REPORTED., Specs:, Includes a 5cm cable with a mini 3 wire camera plug, directly compatible with the following ReadyMadeRC cables:, ,
This is an super small camera with a great picture, ...ReadyMadeRC
RMRC-MINI-V2 (3.6-24V) COMPACT CAMERA PAL
Sensor | 1/4" CMOS |
Pixels NTSC | 720H) x 480(V), PAL |
Resolution | 480 Horizontal TV-lines (480TVL) |
Lens View/Angle | F1.2/ |
Video Signal | 1Vp-p / 75 ohm |
Size | 15.5x15.5x20mm |
Weight | Only 4g! |
Voltage | 3.6V-24V DC |
Current | 45mA@12V |
Yellow | Video |
Black | Ground |
Red | 3.6-24V DC |
ATTENTION: WE ARE CURRENTLY INVESTIGATING A POTENTIAL COMPATIBLITY ISSUE WITH THIS CAMERA AND SPECIFIC VOLTAGES AROUND 12V. AT THIS TIME WE ONLY RECOMMEND THIS CAMERA FOR 5V USE UNTIL WE CAN DETERMINE THE SPECIFICS OF THE COMPATIBILITY ISSUES WE'VE HAD REPORTED., Specs:, Includes a 5cm cable with a mini 3 wire camera plug, directly compatible with the following ReadyMadeRC cables:, ,
This is an super small camera with a great picture, ...ReadyMadeRC
RMRC-PICO-WIDE-V2 (3.6-24V) COMPACT CAMERA PAL
Sensor | 1/3" CMOS |
Pixels NTSC | NTSC:656×492 PAL:768×576 |
Resolution | 520TVL |
Lens View/Angle | 0.5mm F2.0 / 65° wide, 90° diagonal |
Video Signal | 1Vp-p / 75 ohm |
Size | 11 x 11 x 22.5mm |
Weight | Only 3g! |
Voltage | 3.6V-24V DC |
Current | 45mA@12V |
Yellow | Video |
Black | Ground |
Red | 3.6-24V DC |
Specs:, , Includes a 5cm cable with a mini 3 wire camera plug, directly compatible with the following ReadyMadeRC cables:, , *Important Note: We have had a few reports of our Pico camera not performing well with the Dominator HD goggles, typically the issue is that the colors are washed out and appear (close to) black and white. This issue has only been reported with the Dominator HD goggles and the Pico Camera. We are currently investigating the cause of this.,
This is an super small camera with a great picture, ...ReadyMadeRC
5.8 GHZ SPIRONET PATCH DIRECTIONAL CP ANTENNA (RHCP)
VSWR < 1.5 | 1 (5740 - 5860MHz) |
Dimensions | 92mm x 92mm x 10mm |
Weight | 54g |
HobbyWireless
EZ ANTENNA TRACKER MODULE
Fatshark A/V transmitters and receivers. ..." />
Details:, The EzAntenna Tracker module is designed to control the pan/tilt servos of your ground station antenna (A/V receiver's antenna). It allow your ground station's antenna follow you airplane tracking it all the time.,
It's designed to work with ImmersionRC/Fatshark A/V transmitters and receivers. ...HobbyWireless
MICRO-LIGHT PAN & TILT CAMERA MOUNT
Details:, The Pan/Tilt mount designed specifically for the CMOS Killer camera, but it also can be used for CCD cameras as well, just by modifying as shown on the picture below.,
Its lightweight design adds only 2.5 grams (.09oz) to your ...HobbyWireless
R5800X 5.8 GHZ POCKET SIZE HIGH SENSITIVITY RECEIVER - NEW VERSION
Note | to use any other antenna besides the original an |
- 8 Selectable channels | DIP switches |
- Working Frequencies | CH1 |
- Working voltage | 8-12 VDC (runs cooler with 8V) |
- Receiving sensitivity | < -90dBm |
- Receiving frequency | ISM 5.8GHz 8CH |
- Antenna port | 50ohm SMA |
- Antenna | Gain |
- Power supply | DC12V 220mA |
- Video output level | 1Vp-p @ 75ohm |
- Audio output level | 1Vp-p @ 10Kohm |
- Dimensions | 72.5x54.2x15.5mm |
- Current consumption | 120mAh |
- Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
Note | This receiver is compatible with |
Details:, This receiver is a perfect match for TX-V582 and TX-V585 transmitter, also it's the same receiver that comes with the FPV582 and FPV585 plug and play combos. It's not compatible with ImmersionRC transmitters.,
Don't be fooled by the size, this mini pocket size ...HobbyWireless
BLACK STORK II OSD GPS NAVIGATION SYSTEM
Features | - OSD board |
http | //www.avionicsrc.com/blackstork.php |
Details:, , The BlackStork OSD package includes:, - OSD unit - 1.5 version latest firmware, Troubleshooting your OSD:, If you are experiencing a problem with you OSD, here is a easy way to troubleshoot it.,
After the great success of the Black Stork I, now ...HobbyWireless
FAT SHARK BASE SD VGA VIDEO GLASSES
FOV (field of view) | 35°diagonal (Image size |
Interpupillary (IPD) distance | 59 – 69 mm (adjustable) |
Supports optional diopter lens inserts | -2, -4, -6 dpt |
User Controls | Contrast/ brightness control |
Power supply | 7 - 13 V (2S/3S Lipo Battery) |
Power consumption (@7.4V nominal) | 150mA |
Details:, Built for serious FPVer’s, the new BASE SD goggle is the only choice for tethered video piloting., Headset Specifications:, , Optics:, Audio:, Stereo (requires adjustable volume earphone accessory), Electrical:, Mechanical:, Ergonomic molded headset w/ adjustable headband, Weight:, 120g (not including cable), Display:, Full color LCD LED backlit Kopin CyberDisplay, Head Tracker:, None, Interface:, Futaba Square 6pin AV in port (Vin, GND, AudR, AudL, Vid),
The BASESD has dedicated tooling for a smaller, sleeker profile ...