RCModelScout.

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - FRANCE (LARGE)

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - UK (TYPE A)

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - UK (LARGE TYPE A)

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - UK (TYPE B)

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - UK (LARGE TYPE B)

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - USA (STARS AND BARS)

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - USA (TYPE B)

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - USA (TYPE A)

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - USA (LARGE TYPE A)

HobbyKing

SCALE NATIONAL AIR FORCE INSIGNIA DECAL SHEET - SWISS (SMALL)

HobbyKing

HOBBYKING MICRO V-TAIL SERVO SET 29.5G/ 0.11SEC/ 3.2G VERSION 2

Specifications:,

HobbyKing

PROP & BACK-PLATE DRILL JIGS FOR DA100&150 \ DLE111 \ 3W50-170 \ TMM53-106

*Note*: It is best to drill propeller from the back face. Back out drill several times as you go to clear wood from the bit to ensure a smooth, accurate hole. Do not force the bit through the prop. Place bolt in first hole after drilling to help with alignment when drilling other holes. Please always orientate the prop with blade tips at 9 & 3 o'clock or horizontal to the ground with the compression stroke before drill. In case of dead stick landings this can save your prop and your airframe.,

HobbyKing

PROP & BACK-PLATE DRILL JIGS FOR HP-50 \ DA50 \ DLE50 \ DLE55 \ JC51 \ DLE30

*Note*: It is best to drill propeller from the back face. Back out drill several times as you go to clear wood from the bit to ensure a smooth, accurate hole. Do not force the bit through the prop. Place bolt in first hole after drilling to help with alignment when drilling other holes. Please always orientate the prop with blade tips at 9 & 3 o'clock or horizontal to the ground with the compression stroke before drill. In case of dead stick landings this can save your prop and your airframe.,

HobbyKing

TURNIGY 5000MAH 2S2P 40C HARDCASE PACK (ROAR APPROVED)

Hardcase Lithium Polymer pack for high-end performance brushless electric or modified brushed motor cars.Big capacity and C rate give up to 250A for 20seconds and up to 300A for instant throttle punches.Hard case pack ensures the battery wont get damaged from the g-forces and shock associated with R/C vehicles.40C is the genuine rating of which the battery will hold voltage well above 3.4vOther vendors claim their packs to be 40C when in fact they are not. Based on other vendors calculations this would be a 50 or even 60C pack.All TURNIGY packs are resistance matched. Spec.Minimum Capacity: 5000mAhConfiguration: 2S2P / 7.4v / 4CellConstant Discharge: 40CPeak Discharge (22sec): 50CPack Weight: 326gPack Size: 137.5 x 46 x 25mmCharge Plug: JST-XH Discharge plug: 5.5mm Bullet-connector   Now officialy approved by ROAR for race use!,

HobbyKing

ATMEL ATMEGA SOCKET FIRMWARE FLASHING TOOL

Features:, High point precision., Specifications:, Socket :, Phosphor Bronze / Gold Plated, Plunger :, Hardened Beryllium copper / Gold Plated, Barrel :, Phosphor Bronze / Gold Plated, Spring :, Music Wire / Gold Plated, Requires:, USBasp AVR Programming Device for ATMEL proccessors, Suits the Following MCU:, Atmel Atmega8, Atmega48, Atmega88, Atmega168, Atmega328,