HobbyKing
TURNIGY 9XR TRANSMITTER MODE 1 (NO MODULE)
| Online support and user forums available at | www.turnigy9xr.com |
| Channnel | 8ch ppm/9ch pcm |
| Display | 128*64LCD (Backlit) |
| Support Type | Heli/Acro/Glid |
| Stick modes | 1, 2, 3, 4 |
| Encoder type | ppm/pcm |
| Module Interface | JR Compatible |
| Simulator Interface | Yes (JR & Futaba) |
| Buzzer | Yes |
| Battery Compartment | 112 x 44 x 27mm |
| Weight (less battery & Rf Module) | 723g |
| Required | Battery 3S Lipo |
9XR Standard Features:, • 8 Channel PPM/9 Channel PCM, Spec:, Model Memory:16, Included:, Turnigy 9XR Transmitter (Mode 1 – Throttle on Right Stick), Note:, This version is supplied without an RF Module, Please order the relevent RF module from the accessories list below.,
The greatly anticipated Turnigy 9XR has arrived! The software for ...5 Reviews
HobbyKing
TURNIGY 9XR TRANSMITTER MODE 2 (NO MODULE)
| Online support and user forums available at | www.turnigy9xr.com |
| Channnel | 8ch ppm/9ch pcm |
| Display | 128*64LCD (Backlit) |
| Support Type | Heli/Acro/Glid |
| Stick modes | 1, 2, 3, 4 |
| Encoder type | ppm/pcm |
| Module Interface | JR Compatible |
| Simulator Interface | Yes (JR & Futaba) |
| Buzzer | Yes |
| Battery Compartment | 112 x 44 x 27mm |
| Weight (less battery & Rf Module) | 723g |
| Required | Battery 3S Lipo |
9XR Standard Features:, • 8 Channel PPM/9 Channel PCM, Spec:, Model Memory:16, Included:, Turnigy 9XR Transmitter (Mode 2 – Throttle on Left Stick), Note:, This version is supplied without an RF Module, Please order the relevent RF module from the accessories list below.,
The greatly anticipated Turnigy 9XR has arrived! The software for ...5 Reviews
HobbyKing
FRSKY S.BUS SERVO CHANNEL CHANGER
| Dimensions | 48x67x22mm |
| Weight | 6.7g |
| Operating Voltage | 3~16V |
| Operating Temperature | -10~45°C |
Specs:, Compatibility:, FrSky S.BUS & CCPM compatible servos, Futaba S.BUS servos, FrSky S.BUS to PWM Decoder,
The FrSky Servo Channel Changer is a tool designed for ...HobbyKing
ASSAN GUNTHER 8 2.4GHZ FASST COMPATIBLE 8CH S.BUS RECEIVER
Futaba 2.4GHz FASST compatible receivers which ..." />
| Input voltage | 3.7~8.4V |
| Dimensions | 47x30x10.8mm |
| Weight | 12.8g |
Features:, • Compatible with Futaba 2.4GHz FASST transmitters and modules, Specs:,
Gunther series receivers are Futaba 2.4GHz FASST compatible receivers which ...HobbyKing
GWS NARO SUPER 19G DIGITAL SERVO/JR & GYRO
| Model | Naro Super D/JR |
| Voltage | 4.8v~6.0v |
| Speed | .077sec |
| Torque | 3.6kg/cm |
| Weight | 19g |
| Input Voltage | 4.8V~6.0 V |
| Current Consumption | 10mA |
| Operation Temp | -5~60C |
Dimension:, 26.0x27.0x11.3 mm (1.02x1.06x0.45 in ), Weight:, 7.0 g (0.285oz) with Plastic Case, Gain Adjustment:, Single rate, non-remote, Applicable R/C System:, Futaba, JR,Hi-tec, Sanwa / Airtronics,Multiplex, GWS,
GWS Naro Super 19g Digital Servo GWS Piezo Gyro PG-035 Reviews
HobbyKing
HXT 9311BB 11.6G / 1.3KG / .10SEC PRECISION SERVO
| Item No | SSV-9311BB |
| Weight | 11.6 grams / 0.39oz |
| Dimensions | 23 x 12 x 22.5 mm / 0.92 x 0.47 x 0.87 inch |
| Input Voltage | 3.6V ~ 6.0V |
| Torque | At 4.8V |
| Speed | At 4.8V |
| Running Current | 150mA |
| Stall Current | 350mA |
| Horn Gear Spline | 25 Segments |
| Connector Wire Length | 160mm (6.29in) |
| Connector Housing | Futaba connector |
| Ball Bearing | One ball bearing on top |
5 Reviews
HobbyKing
SSV 9315 MABUCHI 15.5G / 2.2KG / .14SEC SERVO
| Item No | SSV-9315 |
| Weight | 15.5grams / 0.54oz. |
| Size | 30 x 13 x 26 mm / 1.18 x 0.51 x 1.02 inch |
| Torque At 4.8V | 2.2kg/cm |
| Speed At 4.8V | 0.14sec / 60 deg at no load |
| Running Current | 270mA |
| Stall Current | 740mA |
| Horn Spline | 25 Segments |
| Connector Wire Length | 160mm (6.29in) |
| Connector Horsing | Futaba connector |
5 Reviews
HobbyKing
CNC RUDDER 2 TRAY 4.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 85g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
5 Reviews
HobbyKing
SSV 9314MG 14.7G / 1.9KG / .12SEC PRECISION SERVO
| Item No | SSV-9314MG |
| Weight | 14.7 grams / 0.46oz |
| Dimensions | 23 x 12 x 22.5 mm / 0.92 x 0.47 x 0.87 inch |
| Torque At 4.8V | 1.5kg/cm , 21 oz/in |
| Torque At 6.0V | 1.9kg/cm , 25 oz/in |
| Speed At 4.8V | 0.13sec / 60 deg at no load |
| Speed At 4.8V | 0.12sec / 60 deg at no load |
| Running Current | 185mA |
| Stall Current | 410mA |
| Horn Gear Spline | 25 Segments |
| Connector Wire Length | 160mm (6.29in) |
| Connector Housing | Futaba connector |
| Ball Bearing | One ball bearing on the top |
| Gear Type | Metal Gear |
5 Reviews
HobbyKing
GWS PG-02 PIEZO GYRO/JR
| Dimension | 28.5 x 26.5 x 11mm |
| Power supply | 4.8~6V |
| Current drain | 30mA (At 4.8V) |
| Operating temperature | -5~+50C |
Specification:, Weight:, 11g(Gyro only) 13g (with gyro mount), Gain adjustment:, Dual-Gain (Remote control), Applicable R/C systems:, Futaba, JR, Hi-Tec, Sanwa/Airtronics Multiplex, GWS,
5 Reviews
HobbyKing
HXT 9864 DIGITAL METAL GEAR 45G / 10.6KG / .11SEC
| Weight | 45g |
| Dimensions | 40.5 x 20 x 37mm |
| Torque | 10.6kg-cm |
| Speed | .11sec/60deg @ no load |
| Running Current | 610mA |
| Stall current | 1200mA |
| Horn Gear Spline | 25segments (same as Futaba) |
| Connector Wire | 300mm |
| Connector Housing | Universal (JR/Futaba) |
| Bearing | Yes |
| Gear Type | Alloy / Steel |
5 Reviews
HobbyKing
TOWERPRO MG996R 10KG SERVO 55G / 10KG / .20SEC
: JR (Fits JR and Futaba),
This is essentially an upgraded version of the famous towerpro ...5 Reviews
HobbyKing
CAR CIGARETTE LIGHTER ADAPTER FOR BATTERY CHARGERS
| Outside diameter | 5.49mm |
| Inside diameter | 2.52mm |
| Outside diameter | 5.49mm |
| Inside diameter | 2.12mm |
| Max current | 12A, 25V |
NOTE:, Please ignore the labels that say 'Futaba' and 'JR'. For some reason the factory believed you can charge your transmitter with a 12V car power supply.,
Car cigarette lighter adapter for 12v chargers. Adapter includes two ...5 Reviews
HobbyKing
TURNIGY MG90S METAL GEAR SERVO 1.8KG / 13.4G / 0.10SEC
| Weight | 13.4g |
| Dimension | 22.8*12.2*28.5mm |
| Operating voltage | 4.8-6.0V |
| Temperature range | 0- 55deg |
Stall torque:, 1.8kg/cm (4.8V) - 2.2kg/cm (6.0V), Operating speed:, 0.10sec/60degree(4.8v) - 0.08sec/60degree(6.0V), Servo Plug:, JR (Fits JR and Futaba),
5 Reviews
HobbyKing
TOWERPRO MG946R 12KG 55G / 12KG / .20SEC
: JR (Fits JR and Futaba),
Higher torque version of the MG995. Good for slow trainers, ...5 Reviews