HiModel
5V,6V/ 5A BEC OUTPUT SWITCH HARNESS W/LED VOLTAGE METER
| Input volt range | 6V to 13V |
| Output voltage | 5V /6V (output voltage selectable via a switch) |
| Voltage meter display range | 4 to 13V |
| Wire type | silicon wire, AWG24 |
| Wire length | 14cm |
| Connector Type | output Futaba/JR compatible |
, , , , , , Specifications:, , , , , , , , , , , 5V,6V/ 5A BEC Output Switch Harness W/LED Voltage Meter, Max Current: 5A, input JST connector, * The output voltage can only be 5V or 6V., , ,
Includes/Requires: Includes: 1 x switch harness (with BEC output and ...1 Reviews
HiModel
15A LARGE CURRENT 2-WAY SWITCH HARNESS
| Max Current | 15A (each switch) |
| Wire type | silicon wire, AWG24 |
| Wire length | 15cm |
| Connector Type | Futaba/JR compatible |
| Switch number | 2 switches (separated from each other) |
, , , , , , Specifications:, , , , , , , , , , , 15A Large Current 2-way Switch Harness, , ,
Includes/Requires: Includes:1 x switch harnessHiModel
25A LARGE CURRENT SWITCH HARNESS W/LED VOLTAGE METER
| Max Current | 20A |
| Wire type | silicon wire, AWG24 |
| Wire length | 15cm |
| Connector Type | Futaba/JR compatible |
, , , , , , Specifications:, , , , , , , , , , , 25A Large Current Switch Harness W/LED Voltage Meter, , ,
Includes/Requires: Includes: 1 x switch harness 20AHiModel
LD-POWER 2208 GIMBAL BRUSHLESS MOTOR
| Weight | 39g |
| Shaft Diameter | 3mm |
| Motor diameter | 28mm |
| Length | 26mm |
| Load weight | 100-200g cameras like Gopro |
| Connector type | Futaba/JR compatible |
, , , , , , Specifications:, , , , , , , , , , , LD-Power 2208 Gimbal Brushless Motor, , ,
Features: Specially designed for brushless gimbal, suit for gimbals for ...HiModel
G.T. POWER 606-D 100-240V INPUT 1-6S 6A DUAL POWER LIPO/LIFE BALANCE CHARGER/DISCHARGE
| Description | G.T. POWER 606-D BALANCE CHARGER/DISCHARGER |
| Operating voltage range | DC 11.0-18.0Volt/ AC 100-240V |
| Circuit power | Max 50W for charging |
| Charge current range | 0.1-6.0A |
| Discharge current range | 0.1-1.0A |
| Current drain for balancing Li-Po | 300mAh/cell |
| NiCd/NiMH battery cell count | 1-15 cells |
| Li-ion/Polymer battery cell count | 1-6 series |
| Pb battery voltage | 2V,20V |
| Net weight | 600g |
| Dimensions | 165×130×45mm |
, , , , , , Specifications:, , , , , , , , , , , Wall plug type: 3-pin squared (in angle) ( we will add a wall plug adaptor for European and U.S. customers to suit the local wall plug, currently we can only supply the European 2-round pin and U.S. 2-square pin adaptors), Max 5W for discharging, , ,
Features: This is the G.T. Power 606-D 1-6S Fast Charging ...4 Reviews
HiModel
E-TECH HEAD LOCK AVCS DIGITAL SERVO COMPATIBLE GYRO G105
| • Operating voltage | DC 4.0V to 6.0V |
| • Input signal | 1.0-2.0ms |
| • Dimension | 27 x 28.5 x 18 mm |
| • Weight | 15g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Compatible with analog and digital servos. Recommend use with ...HiModel
DRAGONFLY NO. 35-B ELEC 3D HELICOPTER ARTF
| Fuselage overall length | 750mm |
| Total width | 320mm |
| Main rotor diameter | 630mm |
| Tail rotor diameter | 145mm |
| Motor | 380 |
| Weight without battery | 343g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: THIS IS THE DRAGONFLY #35B ALMOST READY TO FLY ...HiModel
DRAGONFLY NO.22-A ELEC 3D HELICOPTER ARTF
| Length | 570mm |
| Width | 185mm |
| Height | 165mm |
| Main rotor dia. | 560mm |
| Motor | 370SD |
| Weight | 380-420g???including battery pack???? |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: It is a 3D electromotion helicopter with the CCPM ...HiModel
RADIOLINK MINI HEAD LOCK GYRO GY100
| • Control system | Digital advanced PI (Proportional Integration) control |
| • Gyro sensor | SMM (Silicon Micro Machine) system vibration gyro |
| • Operating voltage | +4 to +6VDC |
| • Operating temperature range | -10°C to +45°C |
| • Dimensions | 21 x 12 x 25.5mm |
| • Weight | 9.7g (including connector) |
, , , , , , Specifications:, , , , , , , , , , , GY100 Ratings (Integrated sensor type AVCS rate gyro), • Functions:, Gyro operation direction switch, DS mode switch, Control sense trimmer, Limit trimmer, Remote gain control, AVCS/normal mode switching., LED indicator, , , Gyro state, , Fast twinkle, , Gyro is searching for the center point., , Constant bright, , Normal working state, , Black, , Power off, , Slow twinkle, , Gyro can't receive the rudder controlling signal, rudder servo can not work., , Intermittent twinkle, , The center point of transmitter has deviated, gyro should be restarted., , , ,
Features: The GY100 is a high performance, compact, light weight ...HiModel
HIGH QUALITY ALUMINIUM BI-RADIO CASE
| Size | 440x 195 x 260 mm |
| Weight | 2900 grams |
, , , , , , Specifications:, , , , , , , , , , , Aluminium Bi-Radio Case, , ,
Features: High quality Aluminium Radio Case Specially for high end ...HiModel
THUNDER 1-6S 4X 50/6 WATT FOUR INDEPENDENT OUTPUT BALANCE CHARGER T6 MULTI
| Input | DC 11 to 15V |
| Power source | 12V DC (car battery)/ AC mains PSU (>200Watts0 |
| Charger power | 50 Watts, current is regulated accordingly. |
| Discharger power | 5 watts, current is regulated accordingly |
| Charge current | 0.1A to 6.0A |
| Discharge current | 0.1A to 1.0A |
| No. of cycle | 1-5 times |
| Battery data memory | up to 5 data |
| Cell count | 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V) |
| Dimensions | 225.4 x 158.6 x 62.5mm |
| Net weight | 1.1kg |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: This is the THUNDER T6 Multi charger. The THUNDER ...1 Reviews
HiModel
G.T. POWER XDRIVE-6 4 X 60W 1-6S LIPO/LIFE BALANCE CHARGER/DISCHARGE
| Operating voltage range | DC 11.0-18.0Volt |
| Charger power | Max 240 Watt (4 x 60W) |
| Discharger power | Max 20 Watt (4 x 5W) |
| Charge current range | 0.1-6.0A |
| Discharge current range | 0.1 - 1A |
| NiCd/NiMH battery cell count | 1-15 cells |
| Lithium battery cell count | 1-6 series |
| Pb battery voltage | 2-20V |
| Current drain for balancing Lithium | 300mA |
| Net weight | 995g |
| Dimensions | 230 x 158 x 60mm |
, , , , , , Specifications:, , , , , , , , , , , G.T. Power XDRIVE-6 4 x 60W 1-6S LiPo/LiFe Balance Charger/Discharge, Cell count:, , ,
Features: This is the G.T. Power G.T. Power XDRIVE-6 4 ...HiModel
IMAX HIGH PRECISION 1-6S 5A LIPO/NIMH/LIFE BALANCE CHARGER IMAX B6
| Dimension | 133L x 87W x 3.3H cm |
| Weight | 282g (net) |
| Input | DC11 to 18V, 5A |
| Max charging power | 50W |
| Charge current | 0.1A to 5A |
| Discharging current | 0.1 to 1A |
| Charging cell number | Li-PO 1-6S; NiCd/NiMh |
| Balance charging connector type | Align/HiModel battery type |
, , , , , , Specifications:, , , , , , , , , , , Max discharging power: 5W, , ,
Includes/Requires: Includes:1 x charger 1 x alligator DC cable 1 ...2 Reviews
HiModel
IMAX 1-6S 5A 100-240V DUAL INPUTS LIPO/NIMH/LIFE BALANCE CHARGER IMAX B6AC
| Dimension | 134L x 142W x 36H mm |
| Weight | 531g (net) |
| Input | DC 11 to 18V, 5A/ AC 100 to 240V (2-round pin plug) |
| Max charging power | 50W |
| Charge current | 0.1A to 5A |
| Discharging current | 0.1 to 1A |
| Charging cell number | Li-PO 1-6S; NiCd/NiMh |
| Balance charging connector type | Align/HiModel battery type |
, , , , , , Specifications:, , , , , , , , , , , Max discharging power: 5W, , ,
Features: This is the iMax dual inputs charger. ● Microprocessor ...1 Reviews
HiModel
THUNDER 1-6S 100-240V 80WATTS DUAL POWER BALANCE CHARGER/DISCHARGER AC680
| AC in | 100V to 240V |
| Input | DC 11 to 18V |
| Charger power | 80 Watts, current is regulated accordingly. |
| Discharger power | 10 watts, current is regulated accordingly |
| Charge current | 0.1A to 6.0A |
| Discharge current | 0.1A to 2.0A |
| Battery data memory | up to 5 data |
| Cell count | 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V) |
| Dimensions | 146 x 135 x 56mm |
| Net weight | 730g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: This is the THUNDER 80Watts dual power input balance ...