ReadyMadeRC
STROBON XL NAVIGATION STROBE (RED) WITH WIRES
| Weight | 3.3g without cable |
| Dimentions | 51x18x7mm |
| Screw Hole Dimentions | 3mm holes with 43mm space |
| Working Voltage | 5-6v (we are suggesting 3A UBEC and 2S lipo for supply) |
| Current Consumption | 5mA(idle)/80mA(average when working) |
| Wire Length | 30cm standard servo cable with Futaba style servo plug |
Features:, ,
New generation STROBON with remote controllable solid RED light and ...ReadyMadeRC
STROBON XL NAVIGATION STROBE (GREEN) WITH WIRES
| Weight | 3.3g without cable |
| Dimentions | 51x18x7mm |
| Screw Hole Dimentions | 3mm holes with 43mm space |
| Working Voltage | 5-6v (we are suggesting 3A UBEC and 2S lipo for supply) |
| Current Consumption | 5mA(idle)/80mA(average when working) |
| Wire Length | 30cm standard servo cable with Futaba style servo plug |
Features:, ,
New generation STROBON with remote controllable solid RED light and ...ReadyMadeRC
STROBON XL NAVIGATION STROBE (BLUE) WITH WIRES
| Weight | 3.3g without cable |
| Dimentions | 51x18x7mm |
| Screw Hole Dimentions | 3mm holes with 43mm space |
| Working Voltage | 5-6v (we are suggesting 3A UBEC and 2S lipo for supply) |
| Current Consumption | 5mA(idle)/80mA(average when working) |
| Wire Length | 30cm standard servo cable with Futaba style servo plug |
Features:, ,
New generation STROBON with remote controllable solid RED light and ...ReadyMadeRC
FY-30A PRO INERTIAL FLIGHT STABILIZATION SYSTEM
| • Any other configuration inquiries, please email us | feiyudz@yahoo.cn. |
| Includes | FY30A module |
FY30A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, - Level flight – When stabilization is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY30A can be used in the following fixed wing models:, • Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, RC Radio suitability:, The FY-30A has been tested to work well with the following RC system:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, The FY-30A can be operated in three flight modes modes:, - Mode 1: FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is turned off. The aircraft is completely under the control of the pilot., - Mode 2: 3D Control Mode. In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY30A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness., - Mode 3: Auto Stabilization mode. In this mode, the FY-30A will automatically command the aircraft control surfaces to maintain level flight at all times.,
GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...HobbyKing
CNC RUDDER 3 TRAY 5.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 101g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
DPCAV
GOPROHD HERO/HERO2 CAMERA CABLE (PRO SERIES), AUDIO & VIDEO
| Orange | Audio (mono) |
| White | Video |
| Red | Not Used |
| Black | Ground |
The overall cable length is 15-inches (380mm) long. It has a 2.5mm phone plug on one end and the other end has two plugs: a black Futaba style male plug for video and a red JR-Hitec receptacle (female) for audio., The wire color codes are as follows:, ,
This lightweight A/V (audio/video) cable is used to connect the ...DPCAV
CUSTOMIZED CABLE FOR LAWMATE A/V TRANSMITTER
| Red | +12VDC, to battery |
| Black | Common Ground, to battery |
| White | Audio input, connects to microphone or OSD |
| Red | +12VDC (from DC-IN) to power 12V microphone |
| Black | Common Ground |
| Orange | Video from camera or OSD |
| Red | +12VDC (from DC-IN) to power 12V camera |
| Brown | Common Ground |
Referring to the photo below, a summary of each connector is as follows:, , Battery:, JST (BEC) style female cable. Goes to the 12VDC battery that powers the video transmitter and camera., Audio:, Futaba male style servo cable, goes to optional microphone or OSD Audio-out port., Video:, JR/Hitec male style servo cable, goes to video camera or OSD Video-Out port., TX:, The TM-121800 video transmitter's cable plugs into this 4-pin connector.,
Upgrade your transmitter's bulky RCA cables with this custom wire ...DPCAV
CUSTOMIZED A/V CABLE FOR SKYRF / BOSCAM / FOXTECH TRANSMITTERS
| IMPORTANT | This cable is NOT compatible with Immersion-RC or Fat-Shark transmitters. |
| Orange | Audio input, connects to microphone or OSD |
| Red | +12VDC (from TX) to power 12V microphone |
| Brown | Common Ground |
| White | Video from camera or OSD |
| Red | +12VDC (from TX) to power 12V camera |
| Black | Common Ground |
| Note | The |
Referring to the photo below, a summary of each connector is as follows:, , Audio-In:, JR/Hitec male style servo cable, goes to optional microphone or OSD Audio-out port., Video-In:, Futaba male style servo cable, goes to video camera or OSD Video-Out port., TX:, This 5-pin connector plugs directly into the TX5.8-200 video transmitter.,
Upgrade your SkyRF / Boscam / Foxtech type 2.4Ghz or ...BevRC
ZERO STEADICAM470 SYSTEM
| Original price | 11999RMB( |
| Pre-order price | 10999RMB( |
Features:, 1: Based on YS-X6, separate IMU for pan-tilt, reliable and high performance, easy to go., 2: Adjustable angles of pan and tilt as your wish., 3: Ground station based on Android and iOS portable devices, no need heavy computer, easy to use., 4: New "carefree" fuction, intelligent heading lock., 5: Follow me, hot point circling., 6: Systematic anti-vibration solution, offer best video image., 7: The best value AP system, high performance, easy to use, easy to maintain., Spec:, 1: Max take-off weight: 2.8kg, 2: Max valid payload: 300-400g(Sony 5N, Panasonic GH2), 3: Hover time: 18 mins(no-load), 10-12 mins(full load), 4: Cruise speed: 10.2m/s max, 5: Wind resistance: 7-8m/s, 6: Flying height: 1000m max, Your purchase includes:, 1 * Steadicam470 frame, You still need:, Your own radio with receiver support SBUS function, such as futaba 6208SB or Frsky compatible Rx,
In stock. 1905USD ) 1746USD ) All the customers who ...HobbyKing
CNC RUDDER 1 TRAY 5.0 INCH (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 71g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3 TRAY 3.5 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 5.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 4.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 3.5 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3 TRAY 4.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |