Skip to content

GetFPV

QAV400 FPV QUADCOPTER FRAME (PRE-ORDER)

Weight375g (without landing gear)
AUW1165g with 2200mah 4s nanotech lipo, gopro3, flight cam, TX, and CC3D board
Flight Time9 minutes hover with 2200mah 4s nanotech
BodyG10
BoomsAnodized machined Aluminum
Suggested PropsGraupner 8" E-Props
Motor ChoiceTiger Motor

Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as FPV electronics to, Suggested Lipo: 4s 2200mah up to 3300mah. HobbyKing NanoTech Lipos in these sizes fit the frame well in terms of dimensions. Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm, Suggested ESC:, Tiger Motor 18amp ESC,

Details The new QAV400 FPV Quadcopter is nimble acrobat that ...

GetFPV

"DISCOVERY" QUADCOPTER WITH CORE AND 69 CAMERA

,

Details This is a bundle of the TBS Discovery that ...

GetFPV

TEAM BLACKSHEEP "DISCOVERY" QUADCOPTER

,

Details The TBS DISCOVERY quadcopter is a durable and crash ...

GetFPV

REPLACEMENT EXPERIMENTAL LONG QAV500 ARM

,

Details This listing is for one (1) arm only, the ...

GetFPV

QAV400 FPV QUADCOPTER FRAME (PRE-ORDER)

Weight375g (without landing gear)
AUW1165g with 2200mah 4s nanotech lipo, gopro3, flight cam, TX, and CC3D board
Flight Time9 minutes hover with 2200mah 4s nanotech
BodyG10
BoomsAnodized machined Aluminum
Suggested PropsGraupner 8" E-Props
Motor ChoiceTiger Motor

Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as FPV electronics to, Suggested Lipo: 4s 2200mah up to 3300mah. HobbyKing NanoTech Lipos in these sizes fit the frame well in terms of dimensions. Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm, Suggested ESC:, Tiger Motor 18amp ESC,

Details The new QAV400 FPV Quadcopter is nimble acrobat that ...

GetFPV

QAV500 "RIB" LANDING GEAR

,

Details This QAV500 landing gear "rib" set is custom produced ...

GetFPV

EXPERIMENTAL LONG QAV500 ARMS (SET OF 4)

,

Details These arms were produced on request from a number ...

GetFPV

TBS "DISCOVERY" QUADCOPTER WITH CORE

,

Details This is a bundle of the TBS Discovery that ...

GetFPV

QAV500 "RIB" LANDING GEAR

,

Details This QAV500 landing gear "rib" set is custom produced ...

GetFPV

REPLACEMENT EXPERIMENTAL LONG QAV500 ARM

,

Details This listing is for one (1) arm only, the ...

GetFPV

EXPERIMENTAL LONG QAV500 ARMS (SET OF 4)

,

Details These arms were produced on request from a number ...

GetFPV

DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER AND GPS/COMPASS

Motor DisarmThere are two modes of Motor Disarm
VU Input7.4V ~ 26.0 V
Output(V-SEN port red wire)3A@5V
(burst current7.5A)
MAX3.15W(0.25A@12.6V)
Normal1.638W(0.13A@12.6V)
Vertical±0.8m
Horizontal±2.5m
PMU28g
GPS27g
LED13g
PMU39.5mm x 27.5mm x 10.0mm
LED25mm x 25mm x 7.0mm
NoteFlight Performance can be effected by mechanical performance and payloads

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2):, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,

Details What's new with the NAZAM V2 Hardware PMU V2 ...

GetFPV

DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER

Motor DisarmThere are two modes of Motor Disarm
VU Input7.4V ~ 26.0 V
Output(V-SEN port red wire)3A@5V
(burst current7.5A)
MAX3.15W(0.25A@12.6V)
Normal1.638W(0.13A@12.6V)
Vertical±0.8m
Horizontal±2.5m
PMU28g
GPS27g
LED13g
PMU39.5mm x 27.5mm x 10.0mm
LED25mm x 25mm x 7.0mm
NoticeFlight Performance can be effected by mechanical performance and payloads

Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2):, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,

Details New with the V2 - New case design with ...

GetFPV

QAV540G GIMBAL PARTS & HARDWARE

,

Details The gimbal parts and hardware required to assemble. This ...

GetFPV

TBS DISCOVERY PRO GIMBAL FRAME

The TBS CORE is famous for:, Accurate flight pack voltage and mAh consumption display, For those working on the assembly please read this primer:,

Details The TBS DISCOVERY PRO gimbal frame is the perfect ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby