Skip to content

ReadyMadeRC

BATTERY TAP WITH T-CONNECTORS

,

The best option for tapping power from your main flight ...

ReadyMadeRC

LC COMMON MODE POWER FILTER

RevisionRev3 March 2013
Typepassive common-mode low-pass power ripple filter
Modescommon mode, single mode - jumper selectable
Maximum voltage16V DC
Maximum current~1.5A
Cutoff frequency at -3dB127 Hz (attenuates higher frequencies/noise)
Voltage drop over filter180mV at 900mA
Maximum voltage ripple120mV
CapacitorJapanese Polymer Capacitor
Impedance/ESR0.012 Ohm at 100kHz/16V
Ripple current5000mA rms
ChokeGerman Common-mode Choke
Series resistance (DC)0.205 Ohm/path
Wire / trace thicknesstwisted 22 AWG / 32 mils
Operating temperature-40 °C to +105 °C
Dimensions37.7 L x 8.8 W x 14.5 H mm
Weight8.1 grams (inc. JST connectors)

Specifications:,

LC power filter - LPF-01 LPF-01 LC Power Filter This ...

ReadyMadeRC

IRC STYLE MALE TO READYMADERC FEMALE AUDIO/VIDEO CONNECTOR

,

Great for adapting the standard ReadyMadeRC camera and transmitter connectors ...

ReadyMadeRC

COMPACT 3 WIRE CAMERA TO MINI TRANSMITTER CABLE WITH JST

,

A great way to make a super-compact camera/transmitter setup. Includes ...

ReadyMadeRC

FPV-JAPAN DVR

Resolution720×480 720×576 640×480 (pixel for pixel raw video frame – no crop or scale)
FormatNTSC or PAL
CodecXvid Mpeg4
Bitrate8000Kb/s (high quality mode – 4GB for 1 hour)
Audio inputInternal/External Mic
Playback speed1x 2x 4x 8x 20x (both forwards and reverse)
SD CardSDHC Card Class 10 recommended (sold separately)
Excellent choices for SD Cards16GB Class 10

Included in the package:, DVR, Available accessories:, ,

Due to pricing and reliability issues, we are no longer ...

ReadyMadeRC

ELOGGER V4 WITH WIRE LEADS - 100A

for more details):,

eLogger TM V4 - the Easiest Way to Monitor your ...

ReadyMadeRC

1/4 WAVE 433MHZ SWIVEL ANTENNA W/SMA MALE CONNECTOR

Features• Low cost
Dimensions (straight)5.59”(142.0mm) long by 0.39”(10.0mm)thick
A great choice for those wanting a swivel antenna for ...

ReadyMadeRC

1/4 WAVE 433MHZ ANTENNA W/SMA MALE CONNECTOR

Dimensions2" (51mm) long by 0.31"(8mm) thick

Features:, • Reduced-height helical whip, Specifications:, • Center Freq. 433MHz,

A compact, high quality antenna with SMA Male connector. 1/4 ...

ReadyMadeRC

433MHZ TURNSTYLE UHF ANTENNA (IBCRAZY)

,

Another great antenna from IBCrazy Designed to improve signal clarity ...

ReadyMadeRC

FATSHARK POWERSHIELD REVERSE VOLTAGE AND OVERCURRENT PROTECTOR

,

This will attach to any of the FatShark (or other ...

ReadyMadeRC

FAT SHARK ATTITUDESD VGA VIDEO GLASSES

NoteBattery, charger and adjustable earphones are sold separately.
Option 1The
Option 2If you want to share the power supply with your ground station, the
Option 3Any 2s-3s lipo with a 2.1mm barrell connector like
Interpupillary (IPD) distance59-69mm (adjustable)
Power input7-13V (2s/3s supply)
Power Consumption @7.4VDC200/350mA (direct/wireless)
Weight150g
Power Supply7-13V (2s-3s supply)
Power consumption310mA@7.4VDC
Transmitting Power250mW
Ch15740, CH2
Mechanical55x26x11mm
Weight22g with antenna

Features: Adjustable IPD, 35 degree FOV VGA display, secured rubber eyecups, lightweight, integrated 5G8 receiver and MIG V4 head tracker., Kit includes:, AtttitudeSD headset (with RX and HT) (Uses the high performance NexWaveRF receiver module), *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

AttiudeSD (VGA, 640X480) FPV goggle with adjustable IPD, large 35 ...

ReadyMadeRC

HS-645MG

Motor Type:, 3 Pole, Bearing Type:, Dual Ball Bearing, Speed:, 0.24 / 0.20 sec @ 60 deg., Torque:, 106.93 / 133.31 oz.in (4.8v/6v), Size:, 1.59" x 0.77" x 1.48", Weight:, 1.94oz,

A superb update to the stock HS-485HB servos from the ...

ReadyMadeRC

900MHZ RHCP PATCH ANTENNA 8DBIC (IBCRAZY)

,

Yet another great antenna built by Alex (AKA IBCrazy). RHCP ...

ReadyMadeRC

900MHZ BLUBEAM OMNI ANTENNA SET (RHCP) (IBCRAZY)

Note:, This amazing creation is built by Alex Greve (IBCrazy).  The cloverleaf antenna design has proven to be one of the best antenna designs for FPV flying.  These 900MHz antenna are right hand circular polarized, and can be used with linearly polarized antennas (with some loss) or a more perfect match are other right hand circularly polarized antennas.  Not to be used with left hand circular polarized antennas., Radiation pattern (from 1280MHz antennas, should be the same for these):,

The BluBeam antenna set is a direct fit circularly polarized ...

ReadyMadeRC

30DB ATTENUATOR WITH SMA CONNECTORS

Frequency0-18GHz
VSWR1.35
Power (Avg)2W @ 25C
Power (Peak)500W
Impedance50 Ohms
Attenuation Accuracy+/- 0.75 dB

Specifications:,

A great tool for testing the performance of equipment. Place ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby