ReadyMadeRC
BATTERY TAP WITH XT-60 CONNECTORS
,
The best option for tapping power from your main flight ...ReadyMadeRC
AIMDROIX ALUMINUM EXTENDED ARM FOR DJI MULTIROTORS V1.5 (RED)
| Note | This listing is for a single arm ONLY |
| Motor mounting holes | 16mm to 25mm |
| Weight | 62 grams. (DJI Stock arms 54g) |
| http | //www.readymaderc.com/store/index.php?main_page=product_info& |
Features:, , : Users should verify that the motor mount screws don't go in too far into their motor since these arms are thinner than the stock arms!!!, : For larger diameter motors, when using the legs, you simply need to use these spacers:,
Please do not back order. V1.5 - Weight has been ...ReadyMadeRC
LETS FPV - ULTRA COMPACT LC POWER FILTER
| Weight | 7 Grams |
| Input Voltage | Maximum 16VDC |
| Output Current | Maximum 1A |
| Voltage Drop | ~200mv @ 500ma |
Dimensions: L: 0.95" (24.1mm), W: 0.8" (20.3mm), H: 0.63" (16mm),
Description This ultra compact LC Filter is great for up ...ReadyMadeRC
RMRC 3 IN 1 - 5A UBEC, POWER DISPLAY, & VOLTAGE ALARM
| Output | 5v or 6v(Selectable via dip switch) 5A continuous, 7.5A burst |
| Input | (3S, 4S, or 6S Lipo) |
| Low Voltage Alarm | 3.7 or 3.5v per cell |
| Alarm LED | 0.2W on board & 1W on plug |
| Size | 70x27x13 mm |
| Weight | 34g with included cables |
Specifications:, ,
High quality Ready Made RC, LLC 5A UBEC w/ Noise ...ReadyMadeRC
GOPRO-HOUSING "SNAP" V2.0 FOR GOPRO HD2 - WHITE
| Weight of the housing alone | 23 grams |
| Disclaimer | I suggest clipping off one side of the |
Most important changes:, - Screw-mechanism instead of the snapping mechanism (details see below), All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With version 1 there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the, A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
"Snap" is a GoPro-housing, which offers a perfect protection of ...ReadyMadeRC
GOPRO-HOUSING "SNAP" V2.0 FOR GOPRO HD2 - BLACK
| Weight of the housing alone | 23 grams |
| Disclaimer | I suggest clipping off one side of the |
Most important changes:, - Screw-mechanism instead of the snapping mechanism (details see below), All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With version 1 there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the, A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
"Snap" is a GoPro-housing, which offers a perfect protection of ...ReadyMadeRC
HERO2 "SNAP"-MOUNT PLATE FOR FLEXIBLE MOUNT OPTIONS - WHITE
,
With this mounting plate you can easily mount the "Snap"-GoPro-housing ...ReadyMadeRC
HERO2 "SNAP"-MOUNT PLATE FOR FLEXIBLE MOUNT OPTIONS - BLACK
,
With this mounting plate you can easily mount the "Snap"-GoPro-housing ...ReadyMadeRC
GOPRO - DUAL CAMERA HOUSING GOPRO+CCD HERO1&2 - WHITE
"Snap-In"-Mechanism for a complete protection and a stable mounting:, We are especially proud of this, thats why the housing has been named after it: Due to a front-plate with a "snap"-mechanism, the box is completely sealed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using the 3 countersunk screws and the buttefly nuts included in the Quadrixette 30-frames, the housing can be mounted very flexible, :, "Snap" can be easily installed/uninstalled on the Quadrixette 30/40. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video).,
"Click" is a mounting system for cameras in the FPV-area. ...ReadyMadeRC
GOPRO-"SNAP" HOUSING FOR GOPRO HERO3 - BLACK
| Weight of the housing includingg screws and lens protection | 30 grams |
| Disclaimer | I suggest clipping off one side of the nut a bit, so there won't be any part of it that would |
All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With the first hero1&2-version there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the 2 lens-options. It does not need to be glued in, but instead is being hold perfectly tight by 3 polyamide screws., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue., A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
This GoPro-housing offers a perfect protection of your GoPro against ...ReadyMadeRC
GOPRO-"SNAP" HOUSING FOR GOPRO HERO3 - WHITE
| Weight of the housing includingg screws and lens protection | 30 grams |
| Disclaimer | I suggest clipping off one side of the nut a bit, so there won't be any part of it that would |
All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With the first hero1&2-version there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the 2 lens-options. It does not need to be glued in, but instead is being hold perfectly tight by 3 polyamide screws., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue., A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
This GoPro-housing offers a perfect protection of your GoPro against ...ReadyMadeRC
HERO3-"SNAP" MOUNT PLATE FOR FLEXIBLE MOUNT OPTIONS - WHITE
,
With this mounting plate you can easily mount the "Snap"-GoPro-housing ...ReadyMadeRC
HERO3-"SNAP" ADAPTER MOUNT PLATE FOR FLEXIBLE OPTIONS - BLACK
,
With this mounting plate you can easily mount the "Snap"-GoPro-housing ...ReadyMadeRC
DJI A2 FLIGHT CONTROLLER SYSTEM AND DJI OSD MKII COMBO
| PLEASE NOTE | This includes qty 1 DJI A2 Multi Rotor Flight Controller AutoPilot System and qty 1 DJI iOSD MkII. |
| The A2 supports 9 types of traditional motor mixer | Quad I, Quad X |
ATTENTION: Despite claims by DJI and other resellers indicating this controller is for commercial use, be aware that it is not currently legal in the US to operate aircraft, even remote controlled like these, commercially without an appropriate FCC waiver or COA. These are sold for amateur use only., Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly., It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):, In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):, , A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest ,
A2 Multi-rotor Stabilization Controller DJI A2 multi-rotor stabilization controller is ...ReadyMadeRC
DJI A2 MULTI-ROTOR STABILIZATION CONTROLLER
| PLEASE NOTE | This includes qty 1 DJI A2 Multi Rotor Flight Controller AutoPilot System, does not include iOSD. |
| The A2 supports 9 types of traditional motor mixer | Quad I, Quad X |
ATTENTION: Despite claims by DJI and other resellers indicating this controller is for commercial use, be aware that it is not currently legal in the US to operate aircraft, even remote controlled like these, commercially without an appropriate FCC waiver or COA. These are sold for amateur use only., Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly., It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):, In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):, , A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest w,
A2 Multi-rotor Stabilization Controller DJI A2 multi-rotor stabilization controller is ...