HiModel
35MHZ BA-R3P6 H/T V3 FM 6-CHANNEL MICRO RECEIVER W/O XTAL
| 4. Weight | 0.19 oz or 5.3g |
| 14. Packing | Shrink wrap |
| 15. Pin direction | horizontal pin |
, , , , , , Specifications:, , , , , , , , , , , 1. Sensitivity：＜2μV, 2. Selectivity：－53dB ±3KHz, 3. Dimensions： 35mmX15mmX10mm(1.38in x 0.59in x 0.39in), 5. Channel：1—6CH, 6. Modulation：FM PPM, 7. Compatibility：PPM transmitter (automatically compatible with positive and negative shift transmitters like Futaba, JR, Hitec, Multiplex, Sanwa, GWS etc.), 8. Effective Receiving ranging：＞300M (＞1000 feet), Note: This is the basic spec of R3PX V3 series receivers; field test could exceed this data due to different radio used. If the field test can not meet this data, please check your radio and crystals., 9. Interference test：Connect the receiver to servo (radio and receiver should be on the same channel). Turn on another radio on an adjacent channel and put it close to the receiver. The receiver should work properly (servo does not glitch at all)., 10. Crystal：UM-5 or UM-1 RX single conversion crystal, 11. Operating current：10mA, 12. Input current：5 V (4-cell) ESC is recommended to power these receivers., 13. frequency： 35M, , ,
Features: ★ BLUEARROW R3Px V3 series micro receivers are upgraded ...HiModel
35MHZ CORONA 6CH FM DUAL CONVERSION DSP FUTABA & JR COMPATIBLE RECEIVER RS620Ⅱ
| Compatibility | SAWAN , HITEC ,JR , FUTABA & WFLY etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Size 1.1”x0.6”x0.3”(28x15x7.6mm), Weight 0.17oz/4.7g(with shrink wrap), Sensitivity better than 2.0μV, Selectivity ±8kHz at 65dB down, Number of channels 1‐6, Filtering Dual turned RF circuitry, Filtering Dual 4 pole ceramic filter, Filtering DSP filtering with mild algorithm, Modulate FM/PPM, Shift polarity Positive or Negative (auto‐detect), Case Shrink wrap, Operating Voltage 4.8V~6.0VDC, Operating Current 11mA., , ,
Features: RD620II receiver – a small and light receiver with ...HiModel
40MHZ CORONA 6CH FM DUAL CONVERSION DSP FUTABA & JR COMPATIBLE RECEIVER RS620Ⅱ
| Compatibility | SAWAN , HITEC ,JR , FUTABA & WFLY etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Size 1.1”x0.6”x0.3”(28x15x7.6mm), Weight 0.17oz/4.7g(with shrink wrap), Sensitivity better than 2.0μV, Selectivity ±8kHz at 65dB down, Number of channels 1‐6, Filtering Dual turned RF circuitry, Filtering Dual 4 pole ceramic filter, Filtering DSP filtering with mild algorithm, Modulate FM/PPM, Shift polarity Positive or Negative (auto‐detect), Case Shrink wrap, Operating Voltage 4.8V~6.0VDC, Operating Current 11mA., , ,
Features: RD620II receiver – a small and light receiver with ...HiModel
72MHZ CORONA 6CH FM DUAL CONVERSION DSP FUTABA & JR COMPATIBLE RECEIVER RS620Ⅱ
| Compatibility | SAWAN , HITEC ,JR , FUTABA & WFLY etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Size 1.1”x0.6”x0.3”(28x15x7.6mm), Weight 0.17oz/4.7g(with shrink wrap), Sensitivity better than 2.0μV, Selectivity ±8kHz at 65dB down, Number of channels 1‐6, Filtering Dual turned RF circuitry, Filtering Dual 4 pole ceramic filter, Filtering DSP filtering with mild algorithm, Modulate FM/PPM, Shift polarity Positive or Negative (auto‐detect), Case Shrink wrap, Operating Voltage 4.8V~6.0VDC, Operating Current 11mA., , ,
Features: RD620II receiver – a small and light receiver with ...3 Reviews
HiModel
CORONA 8-CHANNEL 2.4G TWO-WAY RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER CT8FD/CR8FD
| Transmitter modules | CT8FD |
| Hitec | Optic 6, Eclipse 7, Prism 7 |
| WFLY | WFT09, WFT08 |
| Receiver module | CR8FD, 8 channel |
| Operation Voltage Range | 6~13V |
| Operation Voltage Range | 4.8~6V |
| Sensitivity | -100dBm |
| Resolution | 10bit |
, , , , , , Specifications:, , , , , , , , , , , Compatible with following transmitters:, Futaba 3PK, 3PM, 7U, 8U, 8J, 9C, 9Z, 10C, FN SERIES, T10C, FC-18, FC-28, FF7, Compatible with any Corona two-way transmitter module, Electrical Specifications:, Transmitter module:, Operating Current: , RF output power:, Receiver module:, Operating Current: , , ,
Features: THIS IS THE AFHSS 2.4G TWO-WAY COMMUNICATION SYSTEM FROM ...HiModel
FRSKY TWO-WAY 2.4G FUTABA COMPATIBLE RADIO SYSTEM TELEMETRY DFT/D8R-II PLUS
| Model | DFT |
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 50mA |
| Output Power | 60mW |
| Resolution | 11bit (3072) |
| Futaba | 3PM, 3PK, 7U, 8U, 8J, 9C, 9Z, 10C, FN series, T10C, FC-18, FC-28. |
| Hitec | Optic 6, Eclipse 7, Prism 7. |
| WFLY | WFT09, WFT08. |
| Model | D8R-II Plus |
| Weight | 16.2g |
| Dimension | 54*27*17mm |
| Operating Voltage Range | 4.0V-7.2V |
| Operating Current | 100mA |
| Specified Range | 1.5km (Ground Range) |
| Resolution | 11bit (3072) |
| Latency | 22ms |
| Number of Channels | 8CH |
| Analog voltage | 0~3.3V |
, , , , , , Specifications:, , , , , , , , , , , Transmitter module specifications:, Compatible with the following transmitters:, Receiver specifications:, , ,
Features: The Two-way Radio System developed by FrSky provides an ...2 Reviews
HiModel
ASSAN 2.4G FUTABA COMPATIBLE RF MODULE & RECEIVERS COMBO CF-1 V2 (TWO RECEIVERS X8R6,X8R7)
| FUTABA | 3PM,3PK, 7U, 8U, 8J, 9C , 9Z, and FN series. |
| HITEC | Optic 6, Eclipse 7. |
| WFLY | WFT09 . |
Features:, , Compatible with Futaba radios include:, Includes/Requires:, , Includes:, 1 x RF module, Futaba compatible X8F,
THIS IS THE ASSAN 2.4GHZ RADIO SYSTEM COMBO. CE, FC ...18 Reviews
HiModel
2.4G CORONA DSSS 3-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER CT3F
| Futaba | 3PM, 3PK, 7U, 8U, 8J, 9C, 9Z and FN series. |
| Hitec | Optic 6, Eclipse 7. |
| WFLY | WFT09, WFT08. |
| Robbe | C18, C28 |
| Optional receiver | CR2D, CR3D, CR4D, CR6D, CR8D |
Features:, , CT3F is compatible with radio including:, Includes/Requires:, , Includes:, 1 x Futaba compatible RF module 2.4G CT3F,
1 x antenna 1 x 2.4G receiver CR3DHiModel
2.4G CORONA FHSS 8-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER (RF CT8F FHSS,RX CR8F) V2
| FUTABA | 3PM,3PK, 7U, 8U, 8J, 9C , 9Z, and FN series. |
| HITEC | Optic 6, Eclipse 7. |
| WFLY | WFT09 WFT08 |
, , , , , , Specifications:, , , , , , , , , , , Type, , CT8F/FHSS, , Size, , 58.5x37.5x22mm(2.3"x1.47"x0.86"), , Weight, , 29g, , Output Power, , , Working Voltage, , 6V-13V, , Working current, , 100mA, , Resolution, , 1024, , Compitability, , , , ,
Includes/Requires: Includes: 1 x Futaba compatible RF module 2.4G CT8F ...1 Reviews
HiModel
FLASHER 500 GFCPE FIBER & METAL 3D ELECTRIC HELICOPTER KIT
| ●Length | 850mm |
| ●Height | 310mm |
| ●Main Blade Length | 425mm |
| ●Main Rotor Diameter | 970mm |
| ●Tail Rotor Diameter | 200mm |
| ●Motor Drive Gear | 12T/13T |
| ●Main Drive Gear | 162T |
| ●Autorotation Tail Drive Gear | 145T |
| ●Tail Drive Gear | 31T |
| ●Weight(w/o power system) | 955g |
| ●Flying Weight | Approx 1700g |
, , , , , , Specifications:, , , , , , , , , , , FLASHER 500 GFCPE Fiber & Metal 3D Electric Helicopter Kit, ●Drive Gear Ratio:1:13.5:4.68/1:12.46:4.68, , ,
Features: FLASHER 500 GFCPE Fiber & Metal 3D Electric Helicopter ...HiModel
SKYA 500 CARBON FIBER & METAL ELECTRIC HELICOPTER KIT
| ●Length | 850mm |
| ●Height | 310mm |
| ●Main Blade Length | 425mm |
| ●Main Rotor Diameter | 970mm |
| ●Tail Rotor Diameter | 200mm |
| ●Motor Pinion Gear | 12T/13T |
| ●Main Drive Gear | 162T |
| ●Autorotation Tail Drive Gear | 145T |
| ●Tail Drive Gear | 31T |
| ●Weight(w/o power system) | 935g Approx |
| ●Flying Weight | Approx 1700g |
, , , , , , Specifications:, , , , , , , , , , , ●Drive Gear Ratio:1:13.5:4.68/1:12.46:4.68, , ,
Features: 【CF Frame Combo Version】 ●Features 1.Electric power system. 2.Simple ...2 Reviews
HiModel
2.4G X8F FUTAB/HETIC COMPATIBLE RF MODULE
| Size | 60 X 37 X 21mm (2.36 X 1.46 X 0.83 inch) |
| Antenna | 2dBi |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Compatible with Futaba radios include: FUTABA: 3PM,3PK, 7U, 8U, ...3 Reviews
HiModel
2.4G CORONA DSSS 8-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER (RF CT8F DSSS,RX CR8D) V2
HITEC/WFLY FM Transmitter ..." />
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 100Ma |
| Resolution | 10bit |
, , , , , , Specifications:, , , , , , , , , , , Specification For Transmitter Module type CT8F, Output Power---- 10mW-60mW, Specification for Receiver, CR8D---- Fast Spread 2.4G Receiver work with Corona RF.Module, Operating Voltage Range --- 4.8V-6V, Operating Current --- 30Ma, Specified Range --- 1.5km, Resolution ---10 bit, Latency ---- 22ms, Sensitivity -- -100dbm, Channel --- 8CH, , ,
Features: When you plan to update your Futaba/HITEC/WFLY FM Transmitter ...3 Reviews