HobbyKing
CNC RUDDER 2 TRAY 4.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 85g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
5 Reviews
HobbyKing
FRSKY DF 2.4GHZ COMBO PACK FOR FUTABA W/ MODULE & RX
| Futaba | 3PM, 3PK, 7U, 8U, 9C, 10C, 9Z, FN-Series, T10C, FC-18, FC-28. |
| Hitec | Optic 6, Eclipse 7, Prism 7 |
| WFLY | WFT09, WFT-08 |
| Operating voltage | 3.5~10.0V |
| Power consumption | 100mA |
| Resolution | 3072 |
| Latency | 22ms |
| Analog voltage | 0~3.3V |
| Range | 1.5km-2.5km |
| Dimensions | 55 x 25 x 14 mm |
| Weight | 12.4g |
| Version | 2.0 |
| Operating voltage | 6.0V-13.0V (can handle 3S!) |
| Power consumption | 50mA |
| Resolution | 3072 (11bit) |
| Dimensions | 58.5x37.5x22mm |
| Version | 2.0 |
Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., V8FT:, Receiver Specification:, Number of channels: 8, Module specification:, Output Power:: 60mW, Included:, 1 x 8-channel transmitter module DFT,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
CNC RUDDER 2_TRAY ONLY (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 85g |
3 Reviews
HobbyKing
FRSKY FF-1 2.4GHZ COMBO PACK FOR FUTABA W/ MODULE & RX
| Futaba | 3PM, 3PK, 7U, 8U,8J, 9C, 10C, 9Z, FN-Series, T10C, FC-18, FC-28. |
| Hitec | Optic 6, Eclipse 7, Prism 7 |
| WFLY | WFT09, WFT-08 |
| Operating voltage | 3.0~16V |
| Power consumption | 30mA |
| Resolution | 3072 |
| Latency | 22ms |
| Range | 1.5km-2.5km |
| Dimensions | 44 x 24 x 14 mm |
| Weight | 9.3g |
| Operating voltage | 6.0V-13.0V (can handle 3S!) |
| Power consumption | 50mA |
| Resolution | 3072 (11bit) |
| Dimensions | 58.5x37.5x22mm |
Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Transmitter Module is compatible with the following transmitters:, DFT:, Receiver Specification:, Number of channels: 8, Module specification:, Output Power:: 60mW,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
CORONA 2.4GHZ FUTABA MODULE & RX WITH TELELMETRY (AFHSS)
| Dimension | Length 59mm x Width 37mm x Height 22mm |
| Operation Voltage Range | 6 – 13V |
| Operation Current | <=50mA @ 10v |
| RF Output Power | <=100mW |
| Dimension | Length 50mm x Width 32mm x Height 12mm |
| Operation Voltage Range | 4.8 – 6V |
| Operation Current | <=50mA @ 5v |
| Sensitivity | -100dBm |
| Resolution | 10bit |
| Futaba | 3PK, 3PM, 7U, 8U, 8J, 9C, 9Z, 10C, FN series, T10C, FC-18, FC-28, FF7 |
| Hitec | Optic 6, Eclipse 7, Prism 7 |
| WFLY | WFT09, WFT08 |
Channels: 8, Channels: 8,
The 2.4Ghz CT8F system is the latest transmitter module replacement ...5 Reviews
HobbyKing
CNC RUDDER 3_TRAY 4.5 INCH (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3_TRAY 4.0INCH (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3_TRAY 3.5INCH (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3 TRAY 5.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 101g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 5.0 INCH (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 71g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3 TRAY 3.5 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 5.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 4.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 3.5 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3 TRAY 4.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |