HobbyWireless
FPV-PRO1012 KIT 1000MW 1.2 GHZ DOUBLE RECEPTION - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, If you're looking for a rock solid FPV system with great front and back reception and minimum video drops, then you've got to have this kit., This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., The plug and play board has lots of important features built-in such as:, , Package includes:, - 1x Plug and Play transmitter 1.2 GHz 1000mW with built-in microphone with, Specifications:, Notes:, - The transmitter will have only the channel 8 (1280 MHz) available to USA users. Transmitters shipped to customers out of USA will have all channels available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Besides this kit with can also be used with your ...HobbyWireless
FPV1024 PLUG AND PLAY 2.4GHZ 1000MW WIRELESS SYSTEM - LAWMATE - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, This is a complete plug and play wireless system set, and within few seconds you have everything connected and working wirelessly., The plug and play board has lots of important features built-in such as:, , Note:, We do not recommend the use of 2.4 GHz video system, with any 2.4Ghz radio controlled vehicles, Package includes:, , Specifications:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This system uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
FPV-PRO1024 KIT 1000MW 2.4GHZ + DIVERSITY RECEIVER DOUBLE RECEPTION - LAWMATE - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, , This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., The plug and play board has lots of important features built-in such as:, , Package includes:, - 1x Plug and Play transmitter 2.4 GHz 1000mW with built-in microphone (USA customers only channel 1 is available. It does not affect the performance of the transmitter), Specifications:, Note:, If you are not going to run your RC model, do not turn this transmitter on and leave it on for several minutes, it can overheat damaging the unit! It is 1000mW transmitter in a tiny metal box!!!, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
If you're looking for a rock solid FPV system with ...HobbyWireless
DRAGONLINK V2 - COMPLETE LONG RANGE SYSTEM FOR RADIO CONTROL
Details:, , Note:, No license is required to purchase it, however in order to legally operate within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The Dragonlink became one of the most popular long range ...HobbyWireless
FPV RECORDER WITH BUILT-IN LCD (HIGH RECORDING QUALITY AND NEVER GOES TO BLUE SCREEN).
| Video compressed format | MPEG , files format |
| Photo format | JPG |
| High Resolution LCD | 2.5", TFT true color LCD |
| Audio and video output | RCA 3-in-1 AV output |
| Storage type | SD card |
| Video size and speed | PAL |
| Power supply for external camera is available | Voltage |
| Video format | NTSC/PAL; |
| Multi record mode | Manual/Auto/Motion detection/ for different scenarios; |
| Recording time | 15minute~2.5 hours /1G |
| Power consumption | 200mA |
| Size | 90 mm x 59 mm x23 mm |
| Weight | 100g (including battery) |
Details:, Hobby Wireless proudly introduce the VR1500, very identical to PV500 recorder., Note:, Cheap and slow speed SD cards are prone to cause lockups., Specifications:, , Includes:, VR1500 Recorder,
It was developed with customized firmware for FPV, and it ...HobbyWireless
TX-V313 300MW 1.3 GHZ PLUG AND PLAY TRANSMITTER ONLY.
| (CH1 | 1240 MHz) |
| (CH2 | 1280 MHz) (Only channel 2 is available if shipped to USA) |
| (CH3 | 1320 MHz) |
| (CH4 | 1360 MHz) |
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 27g (transmitter only) |
Details:, , The plug and play board has lots of important features built-in such as:, , Channels:, , Features:, * 300mW RF output power Plug and Play., Specifications:, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a plug and play transmitter only, part of ...HobbyWireless
T905 TRANSMITTER 900 MHZ 500 MW
Details:, It's not the same cheap technology sold over the internet. With this transmitter you will get what you pay for., Channels:, , Transmitter Specs:, -RF Output Power 500 mW, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
It uses PLL technology, very tiny and so light weight ...HobbyWireless
T313 TRANSMITTER 1.3 GHZ 300 MW
| (CH1 | 1240 MHz) |
| (CH2 | 1280 MHz) |
| (CH3 | 1320 MHz) |
| (CH4 | 1360 MHz) |
| Weight | 19g (transmitter only) |
Details:, This is a custom design to be used on applications were weight and reliability is a must., Channels:, , Features:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
It's not the same technology offered by most of retailer ...HobbyWireless
T1012 TRANSMITTER 1.2 GHZ 1000MW - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
| Weight | 30g (transmitter only) |
| Transmission power 50-ohm load CH1 Vcc = 12V | 30dBm |
| Nominal output impedance | 50 ohms |
| Operating voltage | Vcc, 10.5V (minimum), 12V (typical), 13V (maximum) |
| Supply current Vcc = 12V | 450mA (typical), 500mA (maximum) |
| Video input voltage 75-ohm impedance | 1Vp-p |
| Audio input voltage 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Storage humidity | 10 to 80% |
| Dimension and weight Excluding SMA connector | 50 x 26 x 13mm, 20g |
| to see the transmitter and camera connections. Note | BNC to RCA adpater is sold separately in accessories. |
Details:, This transmitter is a power house, providing a 1000 miliwatts of pre RF output. It is the best transmitter for long range applications. (for RC models is recommended to install the T1012 as far as possible away from the models receiver) Even with all that power, it weights only around 1oz 30 grams . With all this, and the right setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, T1012 has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it., Features:, , Specifications:, , Standard shipping package:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Click here for Specs 1000mW RF output power Eight (8) ...HobbyWireless
DJI 900 MHZ DATALINK + WKM MAP VIEW SOFTWARE
Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,
The Click-2-Go mode allows you to choose a point on ...HobbyWireless
DJI 5.8GHZ VIDEO DOWNLINK (TRANSMITTER + RECEIVER)
Details:, , The Wireless Video Link includes both transmitter (TX) and receiver (RX) modules, working in the ISM frequency band of 5.8GHz (5725-5865MHz). Analogue modulated video signals are sent wirelessly by the TX module to the RX module, and then the video signal will be demodulated and sent to a display. There are 8 wireless channels can be selected when you are using this product.These channels are:CH1-5705MHZ, CH2-5685MHZ, CH3-5665MHZ, CH4-5645MHZ, CH5-5885MHZ, CH6-5905MHZ, CH7-5925MHZ, and CH8-5945MHZ., The characteristics of this product are: small size, low power consumption and high sensitivity. The product can be used in many applications requiring wireless video communication. When it's used in the aero-modeling hobby, the Wireless Video Link TX will be mounted to the aircraftand the Wireless Video Link RX is connected to a display screen, allowing video signal wireless transmission,
The new DJI Downlink is specially designed to work with ...HobbyWireless
DJI 2.4 GHZ DATALINK + WKM MAP VIEW SOFTWARE
Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,
The Click-2-Go mode allows you to choose a point on ...HobbyWireless
EASY STAR II - MULTIPLEX
| Construction | Elapor foam on the fuselage, wing and tail section Wings |
| Radio | 3-channel Servos |
| Wingspan | 54" (1370mm) Wing Area |
Details:, Updated and upgraded, the quick-to-build and easy-to-fly EasyStar II is sure to become one of your favorite models. Based on one of the most popular aircraft, the original EasyStar, this improved kit boasts larger internal space, more payload capability and optional ailerons. It is designed to accept a powerful brushless motor which makes it a versatile, durable aircraft sure to impress both the beginner and more advanced pilots. Its gentle gliding characteristics and ease of transport make the EasyStar II effortless hobby fun., FEATURES:, INCLUDES:, Foam fuselage, wings, and tail section, prop, spinner, decals, instruction manual, and hardware, REQUIRES:, SPECS:, COMMENTS:, This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. ,
Hobby-Lobby
ULTRACOTE GREEN
Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Key Features:, High tech polyester covering, Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Surface Preparation:, The covering job can only be as good as the finish of the surface it's applied over. In order for the covering to properly adhere to a surface, the surface must first be smooth and clean. Sand the model using a sanding block and progressively finer sandpaper, with the final sanding being done with 320 grit paper. Vacuum away all of the dust, as specks of dust under the covering will leave unsightly bumps. Fill gaps and dents with a high-quality filler. If using light-colored UltraCote (such as white or yellow), use a tan-colored filler that matches the wood color to prevent the filler from showing through., Trim Film to Size:, Start by covering the bottom of one wing half. Using scissors or sharp hobby knife, cut a piece of UltraCote a few inches larger than needed to cover the wing. Remove the backing (save for later) and place the covering with the adhesive (dull) side down, centered over the wing. Set the covering iron to the application temperature of 220�F., Tacking Covering to Spar:, Tack the covering to the spar or the high point of the wing, using your iron as shown (an iron sock is highly recommened). Gently pull the covering toward the root and toward the tip, as you work the iron from the center of the spar to the root and tip of the wing. Press gently with the iron, allowing the heat (not pressure) to activate the adhesive and bond the covering to the high point. Ideally, the covering will naturally lay flat against the entire surface with a minimum of wrinkles., Covering a Solid-Sheeted Wing:, If covering a solid-sheeted wing, work from the center of the spar outward to the trailing edge and then to the leading edge as shown, using the iron at 220�F. If a wrinkle develops, the covering can be carefully lifted and reapplied., Covering an Open-Structure Wing:, If covering an open-structure wing, ,
UltraCote Green Hangar 9 UltraCote is a high tech polyester ...Hobby-Lobby
GREAT PLANES REALFLIGHT 6.5 AIRPLANE INTERLINK MODE 2
| FEATURES | Vastly improved heli physics with features such as |
| Minimum Recommended System | (Note |
| Optimal System | For best graphical performance |
| Interlink Elite Controller | USB Port |
New features of the RealFlight 6.5 include:, TrueView Realistic Lighting offers the visual impact of full-spectrum daylight, colors are brighter, truer and more intense., Options include:, Tip of the Day-Changes daily to offer user new and better ways to use RealFlight., Sound and Motion Physics, props and wheels blur, engine sound changes with RPM, INCLUDES:, One Great Planes RealFlight 6.5 R/C Flight Simulator DVD, REQUIRES:, 3D Accelerated Video with:, 32 MB Dedicated Video Memory, 3D Accelerated Video with:, 512 MB dedicated video memory, Multiplayer Requirements:, Broadband Internet connection, COMMENTS:, Connectors on the InterLink Elite cord and included adapters make the InterLink Elite compatible with the trainer jack on most Futaba and all JR Spektrum, Hitec and Tower Hobbies systems. Special adapters for use with most older Futaba and Hitec systems are availble separately.,
Great Planes RealFlight 6.5 Airplane Interlink Mode 2 This is ...