HobbyKing
H-KING HIGH TORQUE METAL GEARED BALL BEARING WATERPROOF SERVO 58G/12.8KG CM/0.22S/60
HobbyKing high torque metal geared ball bearing servo, featuring an ..." />
| Voltage | 4.5-6V |
| Weight | 58gram |
| Motor | Brushed |
| Gear Train | Metal geared |
| Type | analogue |
Specs:, Speed:, 0.26sec/60deg(4.8v) 0.22sec/60deg (6.0v), Torque:10, Size:, 40.9mm x 20mm x37.75 mm, Ball Bearing:2,
HobbyKing high torque metal geared ball bearing servo, featuring an ...5 Reviews
HobbyKing
NTM PROP DRIVE 28-26 1000KV / 315W (SHORT SHAFT VERSION)
| Motor Wind | 19T |
| Max current | 21A |
| Weight | 54g |
| ESC | 20~30A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 16mm & 19mm |
| Note | An accessory pack is available for this motor. Please see the related items below. |
Specs:, Model:, NTM Prop Drive Series 2826 1000kv, Kv:1000rpm/v, Poles:3, Max Power:, 200W @ 11.1V (3S) / 315W @ 15V (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Test Data:, 9x4.7 - 11.1V / 113W / 10.2A / 0.632kg thrust,
This is a short shaft version of our popular NTM ...5 Reviews
HobbyKing
H-KING WATERPROOF ANALOG SERVO 40G/3.2KG CM/0.17S
HobbyKing ball bearing analog servo, featuring 2 ball bearings on ..." />
| Voltage | 4.5-6V |
| Weight | 40g |
| Motor | Brushed |
| Gear Train | plastic |
| Type | analogue |
Specs:, Speed:, 0.21sec/60deg(4.8v) 0.17sec/60deg(6.0v), Torque:, 2.5kg.cm (4.8v) 3.2kg.cm (6.0v), Size:, 40.6mm x 20.2mm x36 mm, Ball Bearing:2,
HobbyKing ball bearing analog servo, featuring 2 ball bearings on ...5 Reviews
HobbyKing
ST360 QUADCOPTER FRAME W/MOTORS AND PROPELLERS 360MM
| Width | 360mm |
| Height | 90mm |
| Motor Mount Bolt Holes | 16/19mm |
Features:, • Built from quality aluminum alloy and polyamide nylon., Specs:, Weight:, 170g (w/out electronics), Included in box:, ST360 Quadcopter Frame, Required:, Your own 4CH transmitter and receiver,
The ST360 is a well thought out 360mm quadcopter frame ...5 Reviews
HobbyKing
NTM PROP DRIVE 28-30S 800KV / 300W BRUSHLESS MOTOR (SHORT SHAFT VERSION)
| Max current | 20A |
| Max Power | 300W |
| Shaft | 3mm |
| Weight | 65g |
| ESC | 20~30A |
| Cell count | 3s~6s Lipoly |
| Bolt holes | 16mm & 19mm |
Specs:, Model:, NTM Prop Drive Series 28-30A 800kv (short shaft version), Kv:800rpm/v, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 8x4E - 22.2V / 310W / 13.9A / 1.11kg thrust, Note:, An accessory pack is available for this motor. Please see the related items below.,
This is a short shaft version NTM 28-30S 800kv brushless ...5 Reviews
HobbyKing
NTM PROP DRIVE 13-12 2400KV / 40W
| Max current (Burst) | 3.9A |
| Max current (suststained) | 3.0A |
| Max Power | 40W @ 11.1v (3S) |
| Shaft | 1.5mm |
| ESC | 5~8A |
| Cell count | 2s~3s Lipoly |
Specs:, Model:, NTM Prop Drive Series 13-12 2400kv, Kv:2400rpm/v, Weight:5g, Mount type:, Tri-hole firewall mount (15mm width between mount holes), Connection:, Loose wire (for direct soldering), Prop Test Data:, 3.75x3 - 7.4V / 10W / 1.4A / 56g thrust,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
NTM PROP DRIVE 28-36 1000KV / 400W BRUSHLESS MOTOR
| Motor Wind | 14T |
| Max current | 30A |
| Max Power | 400W |
| Shaft | 4mm |
| Weight | 89g |
| ESC | 30~40A |
| Cell count | 3s~6s Lipoly |
| Bolt holes | 16mm & 19mm |
Specs:, Model:, NTM Prop Drive Series 2836 1000kv, Kv:1000rpm/v, Poles:3, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Test Data:, 11x7E - 11.1V / 220W / 20A / 976g thrust, Note:, An accessory pack is available for this motor. Please see the related items below.,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
HOBBY KING OCTOCOPTER POWER DISTRIBUTION BOARD
HobbyKing Enginerds, this handy power ..." />
| Power Input | XT60 |
Current:, 8 x 10A Outputs (MAX), Motor output:, 8 x 3.5mm Female bullet plug, Aux output:, 2 pin JST compatible, Weight:, 36.0g (including wires),
Designed in house by the HobbyKing Enginerds, this handy power ...5 Reviews
HobbyKing
HOBBY KING QUADCOPTER POWER DISTRIBUTION BOARD LITE.
HobbyKing Enginerds, this handy power ..." />
| Power Input | XT60 |
Current:, 4 x 20A Outputs (MAX), Motor output:, 4 x 2.0mm Female bullet plug, Aux output:, 2 pin JST compatible, Weight:, 19.3g (including wires),
Designed in house by the HobbyKing Enginerds, this handy power ...2 Reviews
HobbyKing
DRIFTER ULTRALIGHT 950MM EPO RTF (MODE 1)
| Spec | Span |
| Length | 850mm |
| AUW | 460g |
| Requires | 4 x AA batteries |
| Note | The receiver is supplied inside the transmitter's battery compartment! |
Features:, • Pre-installed electronics, Includes:, Pre-installed motor & ESC,
Our Drifter Ultralight is a fun little parkflyer for those ...HobbyKing
SKYMASTER V2 PLUG AND FLY TRAINER AIRPLANE BALSA/PLY 1005MM (PNF)
Hobbyking Skymaster is a traditionally built, pre-covered Balsa trainer ..." />
| Wingspan | 1005mm |
| Length | 750mm |
| Flying Weight | 500g |
| Servo | 9g x 3 |
| ESC | 30A w/BEC |
Note:, This is the updated version (Skymaster V2) featuring larger wheels/tires for easy ROG take offs on long grass and a removable magnetic battery hatch in the nose to facilitate battery swaps without removing the wing., Features:, • Traditional Balsa Construction with Tough Sheeted Fuselage, Specs:, Motor:, 2822 Brushless Outrunner 1200kv, Includes:, All Hardware, Prop Saver & Prop, Requires:, Your own 4 Channel Transmitter & Receiver,
The Hobbyking Skymaster is a traditionally built, pre-covered Balsa trainer ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 28-30S 900KV / 270W (SHORT SHAFT VERSION)
| Max current | 18A |
| Shaft | 3mm |
| Weight | 66g |
| ESC | 25~30A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 16mm & 19mm |
Specs:, Model:, NTM Prop Drive Series 28-30S 900kv (short shaft version), Kv:900rpm/v, Max Power:, 215W @ 12v (3S) / 270W @ 15v (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 13x4E - 11.1v - 194W - 17.4A - 1.04kg thrust, Note:, An accessory pack is available for this motor. Please see the related items below.,
This is our short shaft NTM 28-30S 900kv brushless outrunner ...5 Reviews
HobbyKing
QUANUM RELENTLESS BRUSHLESS CATAMARAN RACING BOAT 740MM (ARR)
| Overall Length | 740mm |
| Hull Length | 650mm |
| Beam | 210mm |
| Hull Material | ABS |
Features:, • High performance watercooled brushless power system, Specs:, Weight:, 1200g (w/out battery), Motor:, Watercooled 2815 brushless outrunner, ESC:, 50A watercooled brushless, Servo:, High torque standard size (included), Included:, Quanum Relentless Brushless Catamaran Racing Boat (ARR), Required:, 2CH transmitter and receiver,
When it comes to brushless R/C boat action, it simply ...5 Reviews
HobbyKing
QUANUM AQUAHOLIC BRUSHLESS DEEP V RACING BOAT 740MM (ARR)
| Overall Length | 740mm |
| Hull Length | 650mm |
| Beam | 180mm |
| Hull Material | ABS |
Features:, • High performance watercooled brushless power system, Specs:, Weight:, 1140g (w/out battery), Motor:, Watercooled 2815 brushless outrunner (included), ESC:, 50A watercooled brushless (included), Servo:, High torque standard size (included), Included:, Quanum Aquaholic Brushless Deep V Racing Boat (ARR), Required:, 2CH transmitter and receiver,
When it comes to brushless R/C boat action, it simply ...5 Reviews
GetFPV
NX4008 620KV MULTI-ROTOR MOTOR
| Weight (with cables) | 87g |
| Suitable Props | 9, 10, 11, 12 x 4.5, 4.7, 5 |
| Most Efficient Prop Size | 10x4.7 or 10x5 |
| ESC | 18amp or higher |
| Lipo | 3s or 4s |
| Shaft Diameter | 3mm |
| Prop Adapter Diameter | 5mm |
| Cable Length | 320mm |
| Cable Gauge | 20AWG |
| Stator | 40mm |
| Diameter | 45mm |
| Mounting Holes | 2 sets of 3 Triangularly positioned holes. Large triangle |
KV: 620kv, Suitable Mounting Screw: 6mm M2.5 (for QAV500), 20mm M2.5 (for Pro Tricopter Kit). Button-head, socket screw, or phillips head.,
Details The fpvmanuals NX-4008 is an upgraded version of the ...