RCModelScout.

HobbyKing

YOKOMO INTER COOLER AND OIL COOLER SET

,

HobbyKing

YOKOMO LIGHT BUCKET SET FOR RE AMEMIYA RX-7 FD3S

,

HobbyKing

YOKOMO 3D CARBON FIBER WING SET

,

HobbyKing

YOKOMO DRIFT BODY DUAL MUFFLER SET (2PCS)

,

HobbyKing

OPENPILOT CC3D FLIGHT CONTROLLER WITH CABLE SET FULLY AUTHORIZED

HobbyKing

SERPENT S120 LTX 1/12 PANCAR (KIT)

Power Source:, Terrain:, Body Style:, Scale Size:, Assembly Level:, Track-Width Front:, Track-Width Rear:, Wheelbase:, Internal Gear Ratio:, Drive:, 2-Channel radio system,

HobbyKing

SERPENT SPYDER BUGGY SRX-2 MM 2WD 1/10 (KIT)

- Chassis: Composite chassis plate with a layout allowing for a perfect weight balance, and optimal space for the electronics, battery and servo. The front Kick-up angle in the Chassis provides more clearance and makes the car more forgiving in nose down landings., - Carbon Fiber Front & Rear Shock Towers: The 4mm thick carbon fiber shock towers have multiple shock angle positions to fine tune the car for various track conditions., - 12mm Big Bore Shock Absorbers: The dual system 12mm big bore shocks feature hard coated threaded shock bodies and a unique cap design, combined with a superb o-ring and spacer package. The Shocks can be used with either a Bladder or Emulsion setup and the kit includes a set of molded pistons to choose from. Shock Collars with inner o-rings are used on the threaded bodies to set-ride height and an optional set of 5 springs-sets is available to fine-tune the suspension settings., - Front & Rear Track Rods: Spring steel front and rear track rods are mounted to durable composite captured ball joints. The track Rods have L/R threading for easy adjustments., - Wheel-axles & Wheel Hex: The spring steel wheel-axles use a 12mm hex adapter to follow current market standards. The front spring steel axle is fixed, while the rear wheel-hex is a clamping aluminum version., - Battery Space Mount & Weight Balance: The battery is mounted perfectly in the center line of the car. The design is optimized for saddle packs, but if a shorty type pack is used the battery can be moved forward or back to adjust the weight balance. Pieces of hard foam are included to secure the battery in position. The battery-top-brace has a secure quick release system with handy twist nuts., - Rear Driveshaft System & Wheel Axles: The spring steel drive shafts are thin and light, yet durable. The spring steel wheel-axles are 5mm, light and durable, supported by 10x14x4mm inner and 5x13x4mm outer bearings. These bearings are for sure to stand up the rigors of any track condition. The driveshaft pin is fully captured to prevent any ,

HobbyKing

SERPENT S411 ERYX 3.0 190MM 1/10 (KIT)

- Unique servo-holder: The unique and innovative servo holder has zero influence on tweak, as its floating above the chassis and mounted directly to the steering-assembly in the center of the car. This also keeps the weight lower than any other design., - DJC / CVD's spring-steel: This car is supplied with a complete set of 4 high quality hard coated spring-steel CVD shafts, which are a highly consistent, efficient and durable way to transfer all the power the surface. The front ones are V2 type double joint cardan DJC, the rear regular CVD style shafts., - Chassis plate: The newly designed very narrow chassis plate has been machined from 2mm 7075 T6 aluminum, lowered sides to lower the center of gravity and mount the electronics lower.  All holes in the base of the chassis have been countersunk . The chassis further features extra holes to mount weights and additional stiffeners. All holes are as close to the center line of the chassis, to create even flex., - Lower Shock towers: The Serpent ERYX features lowered shock towers 2.5mm thick carbon fibre shock towers on the front and rear of the car. The upper shock-mount height is now 5,7mm lower than in the ERYX-TE. Each tower sports many holes for adjustment of the shock absorber angle while the rear tower also acts as the mount for the rear body posts and the front tower accommodates a 3rd front body post., Chassis:, Suspension:, Rear axle:, Front axle:, Drive system:, Shock absorbers:, Wheel base:, Track-width front:, Track-width rear:, 2-Channel radio system,

HobbyKing

SERPENT S411 SPORT 1/10 (KIT)

• Chassis: Super narrow, symmetrical, durable black glass-fiber chassis plate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for gear diff, spool and spur., • Shock tower front: Black glass fiber shock tower with 3 upper shock mounting holes to choose from. Holes for an extra central body post are already made as well., • Front bracket: Machined aluminum front brackets, with belt tension adjusting through ex-centers. Suspension brackets in durable nylon., • Front suspension: Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option., • C-hub / steering block: The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheel guidance without chatter., • Shock tower rear: Black glass fiber shock tower with 4 upper shock mounting holes to choose from. The rear body posts are mounted to the top of the rear shock tower., • Rear bracket: Machined aluminum rear brackets, with belt tension adjusting through ex-centers. Suspension brackets in durable nylon with 3.0 RR FR and split type 0.0 blocks RR FR, • Rear suspension: Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.,

HobbyKing

SERPENT S100 LT 1/10 PANCAR (KIT)

• Front end: The front end of the car features 11 different adjustments to help you get the most from your car, all of which are easy to adjust and measure. Fixed lower suspension arms are themselves damped by the central strut which uses rubber o-rings to take up the flex in this area, while the grey anodised aluminium front upper wishbone mounts are available in different caster angles, the car being supplied with 6 degree versions as standard. With the steering block king pins spring loaded, the cornering forces are channelled through the upper wishbone, which enable the car to corner at high speeds., • Tube system: The S100-LT uses the same tube-system as on the S120-LT. Precision machined aluminium coated tubes connected with small ball-links. This system plays a big part in how the car turns into a corner which can be adjusted through the use of different oils ., • Central section: The spring-loaded side-bars, the links, are made of composite nylon and control the roll of the chassis, together with the lateral damper and the main central shock., • Servo saver: The S100 WGT comes supplied with a high quality miniature servo saver, which through the use of orange anodised shims, has adjustable Ackerman. The kit includes 3 alloy servo posts to select from, which enable perfectly centered mounting of any popular brand servo., • Rear axle mounts: The lightweight graphite rear axle is mounted on bearings that sit within eccentric composite inserts that allows the user to ability to quickly and easily change the rear ride height of the car simply by changing between inserts. The kit comes supplied with all 9 inserts which range between 0 and 4mm, each differing by 0.5mm and all are reversible for an even wider range of adjustment., • Rear motor pod, chassis: The strong basis is formed by the 2.5mm thick carbon fibre chassis plate with pockets to allow for a 1S Lipo pack or a 2S lipo-pack, with supports enabling a forward or backward battery position,  and enough space for all the valuable electronics., Chassis:, Rear axl,