RCModelScout.

HobbyWireless

T905 TRANSMITTER 900 MHZ 500 MW

Details:, It's not the same cheap technology sold over the internet. With this transmitter you will get what you pay for., Channels:, , Transmitter Specs:, -RF Output Power 500 mW, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,

HobbyWireless

T313 TRANSMITTER 1.3 GHZ 300 MW

Details:, This is a custom design to be used on applications were weight and reliability is a must., Channels:, , Features:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,

HobbyWireless

T1012 TRANSMITTER 1.2 GHZ 1000MW - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS

Details:, This transmitter is a power house, providing a 1000 miliwatts of pre RF output. It is the best transmitter for long range applications. (for RC models is recommended to install the T1012 as far as possible away from the models receiver) Even with all that power, it weights only around 1oz 30 grams . With all this, and the right setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, T1012 has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it., Features:, , Specifications:, , Standard shipping package:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,

HobbyWireless

DJI 900 MHZ DATALINK + WKM MAP VIEW SOFTWARE

Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,

HobbyWireless

DJI 5.8GHZ VIDEO DOWNLINK (TRANSMITTER + RECEIVER)

Details:, , The Wireless Video Link includes both transmitter (TX) and receiver (RX) modules, working in the ISM frequency band of 5.8GHz (5725-5865MHz). Analogue modulated video signals are sent wirelessly by the TX module to the RX module, and then the video signal will be demodulated and sent to a display. There are 8 wireless channels can be selected when you are using this product.These channels are:CH1-5705MHZ, CH2-5685MHZ, CH3-5665MHZ, CH4-5645MHZ, CH5-5885MHZ, CH6-5905MHZ, CH7-5925MHZ, and CH8-5945MHZ., The characteristics of this product are: small size, low power consumption and high sensitivity. The product can be used in many applications requiring wireless video communication. When it's used in the aero-modeling hobby, the Wireless Video Link TX will be mounted to the aircraftand the Wireless Video Link RX is connected to a display screen, allowing video signal wireless transmission,

HobbyWireless

DJI 2.4 GHZ DATALINK + WKM MAP VIEW SOFTWARE

Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,

HobbyWireless

CYCLOPS NOVA OSD - AUTO-PILOT RTH AND IR STABILIZATION

Details:, , Instructions Manual:, Download Here., Note: When installing the IR sensors they must to be installed firmly and steadily. The IR sensors must to clear of obstruction to be able to dected the horizon in order to work properly.,

HobbyWireless

EASY STAR II - MULTIPLEX

Details:, Updated and upgraded, the quick-to-build and easy-to-fly EasyStar II is sure to become one of your favorite models. Based on one of the most popular aircraft, the original EasyStar, this improved kit boasts larger internal space, more payload capability and optional ailerons. It is designed to accept a powerful brushless motor which makes it a versatile, durable aircraft sure to impress both the beginner and more advanced pilots. Its gentle gliding characteristics and ease of transport make the EasyStar II effortless hobby fun., FEATURES:, INCLUDES:, Foam fuselage, wings, and tail section, prop, spinner, decals, instruction manual, and hardware, REQUIRES:, SPECS:, COMMENTS:, This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. ,

Hobby-Lobby

ULTRACOTE GREEN

Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Key Features:, High tech polyester covering, Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Surface Preparation:, The covering job can only be as good as the finish of the surface it's applied over. In order for the covering to properly adhere to a surface, the surface must first be smooth and clean. Sand the model using a sanding block and progressively finer sandpaper, with the final sanding being done with 320 grit paper. Vacuum away all of the dust, as specks of dust under the covering will leave unsightly bumps. Fill gaps and dents with a high-quality filler. If using light-colored UltraCote (such as white or yellow), use a tan-colored filler that matches the wood color to prevent the filler from showing through., Trim Film to Size:, Start by covering the bottom of one wing half. Using scissors or sharp hobby knife, cut a piece of UltraCote a few inches larger than needed to cover the wing. Remove the backing (save for later) and place the covering with the adhesive (dull) side down, centered over the wing. Set the covering iron to the application temperature of 220�F., Tacking Covering to Spar:, Tack the covering to the spar or the high point of the wing, using your iron as shown (an iron sock is highly recommened). Gently pull the covering toward the root and toward the tip, as you work the iron from the center of the spar to the root and tip of the wing. Press gently with the iron, allowing the heat (not pressure) to activate the adhesive and bond the covering to the high point. Ideally, the covering will naturally lay flat against the entire surface with a minimum of wrinkles., Covering a Solid-Sheeted Wing:, If covering a solid-sheeted wing, work from the center of the spar outward to the trailing edge and then to the leading edge as shown, using the iron at 220�F. If a wrinkle develops, the covering can be carefully lifted and reapplied., Covering an Open-Structure Wing:, If covering an open-structure wing, ,

Hobby-Lobby

GREAT PLANES REALFLIGHT 6.5 AIRPLANE INTERLINK MODE 2

New features of the RealFlight 6.5 include:, TrueView Realistic Lighting offers the visual impact of full-spectrum daylight, colors are brighter, truer and more intense., Options include:, Tip of the Day-Changes daily to offer user new and better ways to use RealFlight., Sound and Motion Physics, props and wheels blur, engine sound changes with RPM, INCLUDES:, One Great Planes RealFlight 6.5 R/C Flight Simulator DVD, REQUIRES:, 3D Accelerated Video with:, 32 MB Dedicated Video Memory, 3D Accelerated Video with:, 512 MB dedicated video memory, Multiplayer Requirements:, Broadband Internet connection, COMMENTS:, Connectors on the InterLink Elite cord and included adapters make the InterLink Elite compatible with the trainer jack on most Futaba and all JR Spektrum, Hitec and Tower Hobbies systems. Special adapters for use with most older Futaba and Hitec systems are availble separately.,

Hobby-Lobby

TRAXXAS STAMPEDE 1/10 RTR MONSTER TRUCK - BLUE

Chris Says:, "No question, this is a great intro truck and for the price, it's a fantastic value. We love to see customers get their first Traxxas at Hobby Lobby, and the Stampede often sells out as fast as we can restock it...", Traxxas 1/10 Stampede RTR RC Truck Features:, 30+ mph!, Traxxas Stampede Specs:, Scale:1:10, Chassis:, Modified Tub made of Composite Nylon, Drive Train:, Magnum 272 Transmission, Speed Control:, XL-5 Electronic Speed Control, Wheel Size:, 2.8" Mirror-Chome (All-Stars), Technical Specifications:, Length:, 16.25", Flying Weight:, 4.1 lbs.,

Hobby-Lobby

TRAXXAS STAMPEDE 1/10 RTR MONSTER TRUCK - BLACK

Chris Says:, "No question, this is a great intro truck and for the price, it's a fantastic value. We love to see customers get their first Traxxas at Hobby Lobby, and the Stampede often sells out as fast as we can restock it...", Traxxas 1/10 Stampede RTR RC Truck Features:, 30+ mph!, Traxxas Stampede Specs:, Scale:1:10, Chassis:, Modified Tub made of Composite Nylon, Drive Train:, Magnum 272 Transmission, Speed Control:, XL-5 Electronic Speed Control, Wheel Size:, 2.8" Mirror-Chome (All-Stars), Technical Specifications:, Length:, 16.25", Flying Weight:, 4.1 lbs.,

HobbyKing

ZIPPY FLIGHTMAX 1800MAH 2S1P 20C

HobbyKing

ZIPPY FLIGHTMAX 5000MAH 2S1P 40C

: 5000mAh, : 2S1P / 2 Cell / 7.4v, : 40C Constant / 50C Burst, : 290g (including wire, plug & case), : 145x50x17mm, : JST-XH, Discharge plug:, 5.5mm Bullet-connector (without housing),

HobbyKing

ZIPPY FLIGHTMAX 2650MAH 4S1P 20C

: 2650mAh, : 4S1P / 4 Cell / 14.8v, : 20C Constant / 30C Burst, : 278g (including wire, plug & shrink wrap), : 138x45x21mm, : JST-XH, : XT60,