HobbyWireless
DRAGON OSD GPS NAVIGATION SYSTEM MAIN BOARD ONLY - NO GPS ANTENNA OR CURRENT SENSOR
Voltage | 2 ports |
Current | 1 port |
IMU | Artificial horizon |
Details:, The Dragon OSD+ v2 is the newest analog OSD from DragonLabs., :, , GPS:, Altitude, Ground speed, Coordinates, Satellites, Track heading, Home heading, LOS Distance, Distance to home, Barometer:, Altitude, Temperature, Variometer:, Airspeed, Vertical speed indicator, : Magnetic heading and GPS, : Elapsed time, Callsign, RSSI, Flight summary, Various display modes, Remote OSD off, Configurable border area, Configuration:, On screen menu, Configure via stick input, Configure via PC, Customizable screen layout, : Range, Altitude, Stall speed, Voltage, mAh, Audio notification, Lost signal, RSSI level, Integration:, Single servo wire link from the DragonLink for multi-channel auto-pilot, Logging:, Google Earth Logging, Autopilot:, RTH (Return to home), IMU fly-by-wire, Way points:, 20 GPS way points configurable on the PC, Hardware:, PAL/NTSC auto-detect, GPS auto-detect, UART interfaces, I2C extension bus (various devices supported), Package includes:, , Optional accessories not included:, , Software/Firmware and Manual:,
It provides a light and low cost board, but high ...HobbyWireless
DRAGON OSD GPS NAVIGATION SYSTEM COMBO
Voltage | 2 ports |
Current | 1 port |
IMU | Artificial horizon |
Details:, The Dragon OSD+ v2 is the newest analog OSD from DragonLabs., :, , GPS:, Altitude, Ground speed, Coordinates, Satellites, Track heading, Home heading, LOS Distance, Distance to home, Barometer:, Altitude, Temperature, Variometer:, Airspeed, Vertical speed indicator, : Magnetic heading and GPS, : Elapsed time, Callsign, RSSI, Flight summary, Various display modes, Remote OSD off, Configurable border area, Configuration:, On screen menu, Configure via stick input, Configure via PC, Customizable screen layout, : Range, Altitude, Stall speed, Voltage, mAh, Audio notification, Lost signal, RSSI level, Integration:, Single servo wire link from the DragonLink for multi-channel auto-pilot, Logging:, Google Earth Logging, Autopilot:, RTH (Return to home), IMU fly-by-wire, Way points:, 20 GPS way points configurable on the PC, Hardware:, PAL/NTSC auto-detect, GPS auto-detect, UART interfaces, I2C extension bus (various devices supported), Package includes:, , Optional accessories not included:, , Software/Firmware and Manual:,
It provides a light and low cost board, but high ...HobbyWireless
DRAGONLINK V2 - COMPLETE LONG RANGE SYSTEM FOR RADIO CONTROL
Details:, , Note:, No license is required to purchase it, however in order to legally operate within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The Dragonlink became one of the most popular long range ...HobbyWireless
FPV RECORDER WITH BUILT-IN LCD (HIGH RECORDING QUALITY AND NEVER GOES TO BLUE SCREEN).
Video compressed format | MPEG , files format |
Photo format | JPG |
High Resolution LCD | 2.5", TFT true color LCD |
Audio and video output | RCA 3-in-1 AV output |
Storage type | SD card |
Video size and speed | PAL |
Power supply for external camera is available | Voltage |
Video format | NTSC/PAL; |
Multi record mode | Manual/Auto/Motion detection/ for different scenarios; |
Recording time | 15minute~2.5 hours /1G |
Power consumption | 200mA |
Size | 90 mm x 59 mm x23 mm |
Weight | 100g (including battery) |
Details:, Hobby Wireless proudly introduce the VR1500, very identical to PV500 recorder., Note:, Cheap and slow speed SD cards are prone to cause lockups., Specifications:, , Includes:, VR1500 Recorder,
It was developed with customized firmware for FPV, and it ...HobbyWireless
TX-V313 300MW 1.3 GHZ PLUG AND PLAY TRANSMITTER ONLY.
(CH1 | 1240 MHz) |
(CH2 | 1280 MHz) (Only channel 2 is available if shipped to USA) |
(CH3 | 1320 MHz) |
(CH4 | 1360 MHz) |
Nominal output impedance | 50 ohms |
Operating Voltage | 10.5 - 13 volts DC |
75-ohm impedance | 1Vp-p |
10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Weight | 27g (transmitter only) |
Details:, , The plug and play board has lots of important features built-in such as:, , Channels:, , Features:, * 300mW RF output power Plug and Play., Specifications:, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a plug and play transmitter only, part of ...HobbyWireless
T905 TRANSMITTER 900 MHZ 500 MW
Details:, It's not the same cheap technology sold over the internet. With this transmitter you will get what you pay for., Channels:, , Transmitter Specs:, -RF Output Power 500 mW, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
It uses PLL technology, very tiny and so light weight ...HobbyWireless
T313 TRANSMITTER 1.3 GHZ 300 MW
(CH1 | 1240 MHz) |
(CH2 | 1280 MHz) |
(CH3 | 1320 MHz) |
(CH4 | 1360 MHz) |
Weight | 19g (transmitter only) |
Details:, This is a custom design to be used on applications were weight and reliability is a must., Channels:, , Features:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
It's not the same technology offered by most of retailer ...HobbyWireless
T1012 TRANSMITTER 1.2 GHZ 1000MW - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
Weight | 30g (transmitter only) |
Transmission power 50-ohm load CH1 Vcc = 12V | 30dBm |
Nominal output impedance | 50 ohms |
Operating voltage | Vcc, 10.5V (minimum), 12V (typical), 13V (maximum) |
Supply current Vcc = 12V | 450mA (typical), 500mA (maximum) |
Video input voltage 75-ohm impedance | 1Vp-p |
Audio input voltage 10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Storage humidity | 10 to 80% |
Dimension and weight Excluding SMA connector | 50 x 26 x 13mm, 20g |
to see the transmitter and camera connections. Note | BNC to RCA adpater is sold separately in accessories. |
Details:, This transmitter is a power house, providing a 1000 miliwatts of pre RF output. It is the best transmitter for long range applications. (for RC models is recommended to install the T1012 as far as possible away from the models receiver) Even with all that power, it weights only around 1oz 30 grams . With all this, and the right setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, T1012 has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it., Features:, , Specifications:, , Standard shipping package:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Click here for Specs 1000mW RF output power Eight (8) ...HobbyWireless
DJI 900 MHZ DATALINK + WKM MAP VIEW SOFTWARE
Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,
The Click-2-Go mode allows you to choose a point on ...HobbyWireless
DJI 5.8GHZ VIDEO DOWNLINK (TRANSMITTER + RECEIVER)
Details:, , The Wireless Video Link includes both transmitter (TX) and receiver (RX) modules, working in the ISM frequency band of 5.8GHz (5725-5865MHz). Analogue modulated video signals are sent wirelessly by the TX module to the RX module, and then the video signal will be demodulated and sent to a display. There are 8 wireless channels can be selected when you are using this product.These channels are:CH1-5705MHZ, CH2-5685MHZ, CH3-5665MHZ, CH4-5645MHZ, CH5-5885MHZ, CH6-5905MHZ, CH7-5925MHZ, and CH8-5945MHZ., The characteristics of this product are: small size, low power consumption and high sensitivity. The product can be used in many applications requiring wireless video communication. When it's used in the aero-modeling hobby, the Wireless Video Link TX will be mounted to the aircraftand the Wireless Video Link RX is connected to a display screen, allowing video signal wireless transmission,
The new DJI Downlink is specially designed to work with ...HobbyWireless
DJI 2.4 GHZ DATALINK + WKM MAP VIEW SOFTWARE
Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,
The Click-2-Go mode allows you to choose a point on ...HobbyWireless
CYCLOPS NOVA OSD - AUTO-PILOT RTH AND IR STABILIZATION
Includes | 1x NOVA OSD |
Details:, , Instructions Manual:, Download Here., Note: When installing the IR sensors they must to be installed firmly and steadily. The IR sensors must to clear of obstruction to be able to dected the horizon in order to work properly.,
Cyclops new NOVA OSD is an awesome and inexpensive fully ...HobbyWireless
EASY STAR II - MULTIPLEX
Construction | Elapor foam on the fuselage, wing and tail section Wings |
Radio | 3-channel Servos |
Wingspan | 54" (1370mm) Wing Area |
Details:, Updated and upgraded, the quick-to-build and easy-to-fly EasyStar II is sure to become one of your favorite models. Based on one of the most popular aircraft, the original EasyStar, this improved kit boasts larger internal space, more payload capability and optional ailerons. It is designed to accept a powerful brushless motor which makes it a versatile, durable aircraft sure to impress both the beginner and more advanced pilots. Its gentle gliding characteristics and ease of transport make the EasyStar II effortless hobby fun., FEATURES:, INCLUDES:, Foam fuselage, wings, and tail section, prop, spinner, decals, instruction manual, and hardware, REQUIRES:, SPECS:, COMMENTS:, This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. ,
HobbyWireless
NEW *FPV1380 PLUG AND PLAY 1.3GHZ *800MW WIRELESS SYSTEM - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS - CAMERA IS OPTIONAL
Nominal output impedance | 50 ohms |
Operating Voltage | 10.5 - 13 volts DC |
75-ohm impedance | 1Vp-p |
10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Details:, It's a powerful and great option if you have a 2.4 Ghz Radio Control, thus not being in the same frequency we do recommed using, The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, , Specifications:, , Notes:, - The USA version transmitter will have two channels available, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
a 1.2 GHz filter to clean any harmonics that can ...HobbyWireless
FPV905 PLUG AND PLAY 900MHZ 500MW WIRELESS SYSTEM - CAMERA IS OPTIONAL
Details:, Do you have a 2.4 Ghz Radio Control, and want to make a video with your model, without concern of interference?, The plug and play board has lots of important features built-in such as:, - High quality microphone, The FPV905 transmitter can be powered through a JST connector using any DC power source from 9 to 13 volts (note: a 3s 11.1v lithium polymer battery can be used to power the system)., Package includes:, - R900 high sensitivity receiver, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Then what you will need is the FPV905 complete Audio ...