HobbyWireless
NEW *FPV1380 PLUG AND PLAY 1.3GHZ *800MW WIRELESS SYSTEM - USA VERSION 1258 AND 1280 MHZ
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, It's a powerful and great option if you have a 2.4 Ghz Radio Control, thus not being in the same frequency we do recommed using, Features:, - High quality microphone, Package includes:, , Specifications:, , Notes:, - Do not turn this transmitter on and leave it on for several minutes without air flowing through, it gets hot. This is powerful transmitter in a tiny little metal box !!!, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
a 1.2 GHz filter to clean any harmonics that can ...HobbyWireless
*NEW FPV584 PRO-DUO PLUG AND PLAY 5.8 GHZ 400MW WIRELESS SYSTEM - NEW VERSION
| - Working voltage | DC 12v (3S 11.1v Lipo battery with |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | ~280mA |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| - Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Working voltage | 12 VDC |
| - Receiving sensitivity | < -90dBm |
| - Receiving frequency | ISM 5.8GHz 8CH |
| - Antenna port | 50ohm SMA |
| - Power supply | DC12V 220mA |
| - Video output level | 1Vp-p @ 75ohm |
| - Audio output level | 1Vp-p @ 10Kohm |
| - Dimensions | 76 x 64 x 18 mm |
| - Current consumption | 120mAh |
Details:, , Another great feature of this system is the 2x audio and video outputs, which gives you the ability of connecting more than one device simultaneously such as: (2x video displays) or (1x video glasses and 1X video display) or (1x video display and 1x video recorder) or (1x video glasses and 1x video recorder)..., Transmitter's features:, - Output Power：400mW, Receiver's features:, - R5800DX Duo Audio and Video outputs., - Antennas:, 5.8 GHz Helical Axial, Includes:, , Notes:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The FPV584 Pro-Duo is the best 5.8 GHz set up ...HobbyWireless
*NEW TX-V1380 800MW 1.2 GHZ PLUG AND PLAY TRANSMITTER - INTERNATIONAL VERSION
Details:, The TX-V1380 transmitter has 8 available selectable channels, and they can not be shipped within US territory because there some channels that are not legal to be used in US. The transmitter has a customized interfaced board to make it very easy to be used for FPV, and another great featur is that the whole transmitter, Features:, - High quality microphone, - Available Frequencies:, , Notes:, We recommed using a, Disclaimer: Hobby Wireless is not responsible for any damage, loss, or illegal changes and operation done by the user.,
only weights around 1oz (30g). The transmitter has 7 selectable ...HobbyWireless
*NEW TX-V1380 800MW 1.2 GHZ PLUG AND PLAY TRANSMITTER 1258/1280 MHZ - US VERSION
Details:, The TX-V1380 transmitter has two available channels to be used in US 1258 MHz and 1280 MHz. It uses a customized interfaced board to make it very easy to be used for FPV, and another great featur is that the whole transmitter, Features:, - High quality microphone, - Available Frequencies:, 1258 MHz and 1280 MHz, Notes:, We recommed using a, Disclaimer: Hobby Wireless is not responsible for any damage, loss, or illegal changes and operation done by the user.,
only weights around 1oz (30g). The transmitter has 7 selectable ...HobbyWireless
10HZ GPS ANTENNA LS20031 FOR DRAGON OSD
Details:, This 10Hz LS20031 is a complete GPS receiver ready to use with Dragon OSD., Features:, , Example of Applications:,
It's a LOCOSYS product with a 66 channel GPS receiver ...HobbyWireless
GUARDIANTM 2D/3D INERTIAL STABILIZER
Details:, , Q: Why do I need the Guardian?, The Guardian helps both beginner and expert pilots fly with confidence, and provides two key modes of operation:, , The Guardian has two submodes for 3D flying:, In 3D Heading Lock submode, simply center your sticks to have the Guardian lock onto your present attitude (pitch, roll, and heading), which can make it easier to perform stunts like prop hanging, inverted flight, knife edges, low speed harriers, etc!, Q: I Fly FPV. Is the Guardian for me?, Q: Will the Guardian work with my model?, Q: How do I install the Guardian?, Q: How do I configure the Guardian?, Q: How does the Guardian work?, Q: What sets the Guardian apart from other Stabilization systems out there?, Q: I want one for each of my models! When and where can I buy it??, Q: Where can I find more details?, Here is a video tutorial of Guardian installation and configuration:,
Master your Skies! Based on Eagle Tree's proven inertial stabilization ...HobbyWireless
GUARDIAN STABILIZATION SENSOR MODULE FOR OSD PRO
| Web Site | http |
| BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, Feather-light and about the size of a postage stamp, the inertial sensor based Guardian stabilization expander uses cutting edge inertial sensors and sensor fusion algorithms to provide world class stabilization to your fixed wing or elevon model. It’s a “Guardian Eagle” for your plane!, E-mail:, sales@eagletreesystems.com,
To stabilize your model, just mount the Guardian in a ...HobbyWireless
ZAP ODORLESS FOAM SAFE MEDIUM CA - 1 OZ.
Details:, , Description:,
A must-have for foam model making Zap-O Odorless Foam Safe ...HobbyWireless
CASTLE CREATIONS THUNDERBIRD 36 BRUSHLESS SPEED CONTROL
| * Battery Eliminator Circuit (BEC) | eliminates receiver battery |
| * Low torque "Soft Start" | protects gear boxes and belt drives from shock |
| * Simple setup | no complicated switches or wiring |
| * Self-calibrating endpoints | maximizes usable stick travel |
| * Max volts | 15 volts 3S Lipo 12 NiCad/NiMh |
| * BEC | Linear regulator 3 amp max |
| * Length | 1.5" (38.1mm) |
| * Width | 1" (25.4mm) |
| * Height | 0.35" (8.8mm) |
| * Weight | 0.7 (20g) |
| * Brake | On/Off |
Details:, , Description:, , Specs:, , * Max amps: 36,
Need some power in your flying wing? Try a Thunderbird-36 ...HobbyWireless
CASTLE CREATIONS THUNDERBIRD 18 BRUSHLESS SPEED CONTROL
| * Battery Eliminator Circuit (BEC) | eliminates receiver battery |
| * Low torque "Soft Start" | protects gear boxes and belt drives from shock |
| * Simple setup | no complicated switches or wiring |
| * Self-calibrating endpoints | maximizes usable stick travel |
Details:, , Description:, Both new Thunderbird controllers feature automatic lipo detect cutoff right from the package! Just plug in and and fly your lipos safely with no programming needed (or change the setting to fly NiCad/NiMH)!, Specs:, ,
Only Castle Creations can bring you this level of consistent ...HobbyWireless
HORNET OSD + GPS KIT
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
Details:, The Hornet- OSD overlays flight telemetry information onto your video image. The telemetry information displayed includes flight altitude, flight speed, flight direction, and home direction and so on. You also can save the telemetry information to a MICRO SD card (, The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:,
sold separately ), then realizing trace playback via FYGCS. The ...HobbyWireless
PICO SWITCH R/C RELAY
| Max relay voltage | 60VDC, 125VAC |
| Max relay current | 1A @ 24VDC, 0.5A @ 125VAC (60W lightbulb) |
| Relay resistance | 100 mΩ max |
Details:, , Product Description:, , Specifications:, , Note: PicoSwitch has a maximum voltage rating of 125VAC, meaking it unsuitable for toggling 220VAC applications., Diagrams:, , Dimensions:, , Applications:,
PicoSwitch is a relay switch that you toggle via hobby ...HobbyWireless
HORNET OSD + FY-31AP FLIGHT STABILIZER SYSTEM, GPS AUTO-PILOT FUNCTIONS
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
Details:, FY-31AP, By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , • FY-31AP module:, , • GPS module:, , The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following:, , The modes are shown as below:,
Attitude Flight Stabilization System (AFSS) 1. Attitude Flight Stabilization System ...