HobbyKing
TURNIGY NANO-TECH 2500MAH 3S1P 5~10C TRANSMITTER LIPO PACK
Capacity | 2500mAh |
Dimensions | 106 x 50 x 14mm |
Balance Plug | JST-XH |
Discharge Plug | JR & Futaba |
Voltage:, 3S1P / 3 Cell / 11.1V, Discharge:, 5C Constant / 10C Burst, Weight:, 155g (including wire, plug & case),
Typically reserved for high amp draw performance applications Turnigy nano-tech ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2500MAH 3S1P 5~10C TRANSMITTER LIPO PACK
Capacity | 2500mAh |
Dimensions | 95 x 30x 24mm |
Balance Plug | JST-XH |
Discharge Plug | JR & Futaba |
Voltage:, 3S1P / 3 Cell / 11.1V, Discharge:, 5C Constant / 10C Burst, Weight:, 147g (including wire, plug & case),
Typically reserved for high amp draw performance applications Turnigy nano-tech ...5 Reviews
HobbyKing
HEAVY DUTY RX TWIN SWITCH WITH CHARGE PORT & FUEL DOT RED
Max Voltage | 18v |
Wire | AWG 22 Silicone |
Dimensions | 78mmx24mm |
Connectors | Generic JR/Futaba |
Specs:, Max Amps:5A, Weight:, 36g With Wires & Connectors,
Heavy Duty Reciever & Ignition or Twin RX Battery Switch ...5 Reviews
HobbyKing
HEAVY DUTY RX SWITCH WITH CHARGE PORT & FUEL DOT RED
Max Voltage | 18v |
Wire | AWG 22 Silicone |
Dimensions | 63mmx24mm |
Connectors | Generic JR/Futaba |
Specs:, Max Amps:5A, Weight:, 20g With Wires & Connectors,
Heavy Duty Reciever Battery Switch made from GFPA with charge ...5 Reviews
HobbyKing
TGY-306G-HV HIGH VOLTAGE ULTRA FAST/HIGH TORQUE MG DIGITAL ALLOY CASED SERVO 3.7KG / .05SEC / 21G
Model | TGY-306G-HV |
Operating Voltage | 4.8V / 6V / 7.2V |
Size | 22.9X12.1X27.3mm |
Weight | 21g |
Motor | 12mm Coreless |
Potentiometer | indirect Drive |
Ball bearing | 2 Ball Bearing |
Gear | Metal |
Case | Aluminum |
Connector wire | 220mm |
Plug | JR/Universal |
Operating Speed:, 0.07sec.60º/ 0.06sec.60º/ 0.05sec.60º, Stall Torque:, 2.5kg.cm /3.1kg.cm /3.7kg.cm,
TGY-306G-HV High Voltage Ultra Fast/High Torque MG Digital Alloy Cased ...5 Reviews
HobbyKing
TURNIGY TGY-113MG METAL GEAR DIGITAL SERVO 2.2KG / 0.10S / 12G
Weight | 12g |
Dimensions | 23.9x11.7x22.7 |
Torque At 4.8V | 1.8kg/cm |
Torque At 6.0V | 2.2kg/cm |
Lead/Plug | JR Style 220mm Long |
Specs:, Speed At 4.8V:, 0.12 sec / 60° at no load, Speed At 6.0V:, 0.10 sec / 60° at no load,
Turnigy TGY-113MG Metal Gear Digital Servo 2.2kg / 0.10s / ...5 Reviews
ReadyMadeRC
EZUHF TRANSMITTER
http | //fpvlab.com/forums/showthread....rade-procedure |
http | //fpvlab.com/forums/showthread....r-installation |
http | //fpvlab.com/forums/showthread....bind-procedure |
http | //www.youtube.com/watch?v=gk46N8RKd2c&feature=channel_video_title |
Video describing how to connect to a JR radio:, , Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
The EzUHF transmitter is a true powerhouse with a wealth ...ReadyMadeRC
FAT SHARK HEAD TRACKER TO 3.5MM DATA CABLE (DX8, OTHER)
Note: Most JR/Spektrum radios do NOT have the correct trainer functions to work with a head tracker. So far, only the DX8 has been verified to work.,
This cable will allow you to hook up your FatShark ...HobbyKing
CNC RUDDER 3 TRAY 5.0 INCH (#4-40) BLACK
Shoring | 2 Bearing Insert |
Servo | HITEC, FUTABA, JR |
Weight | 101g |
Shoring, Arm | Titanium Silver |
Tray | The resulting black anodized finish rework is a classy two-tone image |
DPCAV
SERVO SIGNAL BOOSTER-AMP
Weight | 1.5 grams. |
Current Draw | 2mA typical. |
Size | Standard servo cable. |
Wire Length | 12 inches (30cm). |
Connectors | Universal JR/Hitec style R/C connectors. |
Instructions:,
This Servo Signal Booster is used to restore the low ...DPCAV
LOST MODEL ALARM
Weight | 5 grams. |
Current Draw | 15mA average during an alarm. |
Cable Length | 2.5 inches (60mm). |
Connectors | Universal JR/Hitec style R/C connectors. |
Instructions:,
This Lost Model Alarm (LMA) produces a loud buzzer noise ...DPCAV
GOPROHD HERO/HERO2 CAMERA CABLE (PRO SERIES), AUDIO & VIDEO
Orange | Audio (mono) |
White | Video |
Red | Not Used |
Black | Ground |
The overall cable length is 15-inches (380mm) long. It has a 2.5mm phone plug on one end and the other end has two plugs: a black Futaba style male plug for video and a red JR-Hitec receptacle (female) for audio., The wire color codes are as follows:, ,
This lightweight A/V (audio/video) cable is used to connect the ...DPCAV
CUSTOMIZED CABLE FOR LAWMATE A/V TRANSMITTER
Red | +12VDC, to battery |
Black | Common Ground, to battery |
White | Audio input, connects to microphone or OSD |
Red | +12VDC (from DC-IN) to power 12V microphone |
Black | Common Ground |
Orange | Video from camera or OSD |
Red | +12VDC (from DC-IN) to power 12V camera |
Brown | Common Ground |
Referring to the photo below, a summary of each connector is as follows:, , Battery:, JST (BEC) style female cable. Goes to the 12VDC battery that powers the video transmitter and camera., Audio:, Futaba male style servo cable, goes to optional microphone or OSD Audio-out port., Video:, JR/Hitec male style servo cable, goes to video camera or OSD Video-Out port., TX:, The TM-121800 video transmitter's cable plugs into this 4-pin connector.,
Upgrade your transmitter's bulky RCA cables with this custom wire ...DPCAV
CUSTOMIZED A/V CABLE FOR SKYRF / BOSCAM / FOXTECH TRANSMITTERS
IMPORTANT | This cable is NOT compatible with Immersion-RC or Fat-Shark transmitters. |
Orange | Audio input, connects to microphone or OSD |
Red | +12VDC (from TX) to power 12V microphone |
Brown | Common Ground |
White | Video from camera or OSD |
Red | +12VDC (from TX) to power 12V camera |
Black | Common Ground |
Note | The |
Referring to the photo below, a summary of each connector is as follows:, , Audio-In:, JR/Hitec male style servo cable, goes to optional microphone or OSD Audio-out port., Video-In:, Futaba male style servo cable, goes to video camera or OSD Video-Out port., TX:, This 5-pin connector plugs directly into the TX5.8-200 video transmitter.,
Upgrade your SkyRF / Boscam / Foxtech type 2.4Ghz or ...HobbyKing
CNC RUDDER 1 TRAY 5.0 INCH (M3) BLACK
Shoring | 2 Bearing Insert |
Servo | HITEC, FUTABA, JR |
Weight | 71g |
Shoring, Arm | Titanium Silver |
Tray | The resulting black anodized finish rework is a classy two-tone image |