HobbyKing
MULTIPLEX TRANSMITTER ADAPTER PLUG 3.5MM TO DIN5 FOR FLIGHT SIMULATOR
Multiplex Transmitter Adapter Plug 3.5mm to DIN5 for Flight Simulator" />
| Length | 152mm |
Specs:, Plug types:, Female 3.5mm to Male DIN5,
Multiplex Transmitter Adapter Plug 3.5mm to DIN5 for Flight Simulator5 Reviews
HobbyKing
REFLEX XTR2 ULTIMATE-EDITION WITH MULTIPLEX CABLE
The simulator can operate in either one of 2 Stereoscopic 3D modes: either using red/cyan anaglyph glasses (included with the simulator), or using 3D shutter glasses. Note that 3D shutter glasses require the use of a 120Hz 3D display and NVIDIA-compatible graphics card.,
The new Reflex XTR2 is the result of many years ...HobbyKing
POWERBOX COMPETITION W/ SENSOR SWITCH (OLED VERSION)
| Supports three battery types | NiMh/NiCd, LiFePo |
| Dropout voltage | approx. 0,25 V |
| Servo signal resolution | 0,5µs |
| Bus systems | Spektrum, Multiplex |
| Temperature range | - 30 °C to + 75 °C |
| Weight | 115 g |
| SensorSwitch | 15 g |
| EMV approval | EN 55014-1 |
| CE approval | 2004/108/EG |
Features:, High resolution graphical OLED screen with 128x64 pixels, Specification:, Operating voltage:, 4,0 Volts to 9,0 Volts, Power source:, 2 x two-cell LiPO batteries 7,4 Volts, Current drain:, Power-on state approx. 130 mA, Max. receiver and servo current:, 2 x 10 A (stabilised), 2 x 20 A (Peak - Dependant on cooling), Signal frame rate:, User variable - 9ms, 12ms, 15ms, 18ms, 21ms, Screen:, OLED 128 x 64 pixels, graphic, Servo sockets:, 18 sockets, 12 channels, 4 of them match-channels, Dimensions:, 110 x 72 x 24 mm (incl. base plate),
The PowerBox Competition is the latest innovation from PowerBox Systems. ...3 Reviews
HobbyKing
GWS NARO SUPER 19G DIGITAL SERVO/JR & GYRO
| Model | Naro Super D/JR |
| Voltage | 4.8v~6.0v |
| Speed | .077sec |
| Torque | 3.6kg/cm |
| Weight | 19g |
| Input Voltage | 4.8V~6.0 V |
| Current Consumption | 10mA |
| Operation Temp | -5~60C |
Dimension:, 26.0x27.0x11.3 mm (1.02x1.06x0.45 in ), Weight:, 7.0 g (0.285oz) with Plastic Case, Gain Adjustment:, Single rate, non-remote, Applicable R/C System:, Futaba, JR,Hi-tec, Sanwa / Airtronics,Multiplex, GWS,
GWS Naro Super 19g Digital Servo GWS Piezo Gyro PG-035 Reviews
HobbyKing
GWS PG-02 PIEZO GYRO/JR
| Dimension | 28.5 x 26.5 x 11mm |
| Power supply | 4.8~6V |
| Current drain | 30mA (At 4.8V) |
| Operating temperature | -5~+50C |
Specification:, Weight:, 11g(Gyro only) 13g (with gyro mount), Gain adjustment:, Dual-Gain (Remote control), Applicable R/C systems:, Futaba, JR, Hi-Tec, Sanwa/Airtronics Multiplex, GWS,
5 Reviews
HobbyKing
GWS PG-03 PIEZO GYRO/FUTABA
| Input Voltage | 4.8V~6.0 V |
| Current Consumption | 10mA |
| Operation Temp | -5~60C |
Specification:, Dimension:, 26.0x27.0x11.3 mm (1.02x1.06x0.45 in ), Weight:, 7.0 g (0.285oz) with Plastic Case, Gain Adjustment:, Single rate, non-remote, Applicable R/C System:, Futaba, JR,Hi-tec, Sanwa / Airtronics,Multiplex, GWS,
5 Reviews
HobbyKing
HOBBYKING X-1000 ADVANCED HEAD-MOVEMENT-TRACKER GYRO
| Power | 8V to 12V DC power supply. Some |
| Size | 25mmX35mm |
| Weight | 20g |
| Range for measuring | +-90 degree/second rotational speed movement. |
| Channels | X axis- channel 7 Y axis-channel 8 |
| Graupner | (MC20, MC24, MX22) |
| JR and other transmitters without programmable channel | (9303, 9X) |
Specifications:, Default Setting:, FUTABA:, (FF-7, FF-8, FF-9, T9Z, T12MZ, T14MZ), Multiplex transmitter:, (Royal Evo, Cockpit SX, mc4000),
X-GYRO 1000 is a two axis head tracking system, based ...5 Reviews
HobbyKing
GWS PG-02 PIEZO GYRO/FUTABA
| Dimension | 28.5 x 26.5 x 11mm |
| Power supply | 4.8~6V |
| Current drain | 30mA (At 4.8V) |
| Operating temperature | -5~+50C |
Specification:, Weight:, 11g(Gyro only) 13g (with gyro mount), Gain adjustment:, Dual-Gain (Remote control), Applicable R/C systems:, Futaba, JR, Hi-Tec, Sanwa/Airtronics Multiplex, GWS,
5 Reviews
HobbyKing
GWS PG-03 PIEZO GYRO/JR
| Input Voltage | 4.8V~6.0 V |
| Current Consumption | 10mA |
| Operation Temp | -5~60C |
Specification:, Dimension:, 26.0x27.0x11.3 mm (1.02x1.06x0.45 in ), Weight:, 7.0 g (0.285oz) with Plastic Case, Gain Adjustment:, Single rate, non-remote, Applicable R/C System:, Futaba, JR,Hi-tec, Sanwa / Airtronics,Multiplex, GWS,
5 Reviews
HobbyKing
X-GYRO 500 SINGLE AXIS HEAD TRACKING SYSTEM.
| Voltage | 8~12v |
| Weight | 20g |
| Range | +/- 90degree |
| FUTABA | (FF-7, FF-8, FF-9, T9Z, T12MZ, T14MZ) |
| Graupner | (MC20, MC24, MX22) |
| Multiplex transmitter | (Royal Evo, Cockpit SX, mc4000) |
| JR and other transmitters without programmable channel | (9303, 9X) |
Note:, A user manual can be downloaded from the files tab.,
The X-Gyro 500 is a simple single axis head tracking ...1 Reviews
HobbyKing
POWERBOX COMPETITION SRS W/ SENSOR SWITCH
| • SRS | Serial Receiver System that uses receivers with serial interface |
SRS stands for Serial Receiver System: in contrast to conventional battery backer systems, servo information is transferred using a digital serial signal generated by the receiver. This reduces the number of connections required between the receiver and the PowerBox to a single cable. It is also easy to connect a second receiver to the system, which then assumes control of the model if the first receiver should fail to pick up a signal. In the case of Spektrum and Jeti, only the satellite receivers are connected to the Competition SRS., However, servo-matching also allows functions to be linked, avoiding the need for two channels at the transmitter. As an example: the left and right landing flaps can be operated using just one transmitter channel, as the direction of rotation and the servo end-points are adjusted at the Competition., Operating voltage:, Power source:, Current drain:, Max. receiver and servo current:, Servo signal resolution:, Signal frame rate:, Screen:, Bus systems:, Servo sockets:, Temperature range:, Dimensions:, Weight:, SensorSwitch:, EMV approval:, CE approval:,
The PowerBox Competition SRS is the first device in an ...HobbyKing
X8D 2.4GHZ TRAINER PORT X8-HACK MODULE (PPM ONLY)
| Range | 800m+ |
Channels:8,
Now you can convert any PPM transmitter to 2.4Ghz with ...5 Reviews
HobbyKing
FPV RADIO TELEMETRY KIT - 915MHZ
| Features | • Very small size |
| Band | 915MHz |
| Antenna connectors | RP-SMA connector |
| Sensitivity | -117dBm sensitivity |
| Interface | Standard TTL UART |
| Connection status | LED indicators |
Specs:, Output power:, 100mW (20dBm), adjustable between 1-20dBm, Includes:, Radio Telemetry base station (USB Connection),
This Radio Telemetry kit offers a great low price, longer ...5 Reviews
HobbyKing
FPV 433MHZ RADIO TELEMETRY KIT 100MW
| Features | • Very small size |
| Dimensions (USB board for ground) | 55x17mm |
| Dimensions (Serial board for air) | 46x20mm |
| Weight (USB board for ground) | 7.5g |
| Weight (Serial board for air) | 5.6g |
This radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground)., Specs:, 'Air' and 'ground' variants, FT232-style pinout and USB connector, respectively,
The system provides a full-duplex link using HopeRF's HM-TRP modules ...5 Reviews
HobbyKing
FPV 433MHZ RADIO TELEMETRY KIT 100MW V1.1
| Features | • Very small size |
| Band | 433MHz |
| Antenna connectors | RP-SMA connector |
| Sensitivity | -117dBm sensitivity |
| Interface | Standard TTL UART |
| Connection status | LED indicators |
Specs:, Output power:, 100mW (20dBm), adjustable between 1-20dBm, Includes:, Radio Telemetry base station (USB Connection),
This Telemetry radio set allows you to link to a ...5 Reviews