, - Driven gear rate: 14:1:5
, , , ,
This is E-Sky's flagship model. Aimed at intermediate to advanced ...
NitroTek
- Length
| 525mm | - Height
| 185mm | - Main rotor diameter
| 540mm | - Tail rotor diameter
| 800mm | - Motor gear
| 8T | - Weight
| 410g | - Battery
| 11.1V 1000mAh Li-po with UK Charger | - Motor
| Super370 motor + CN12 motor | - Transmitter
| 2.4GHz 6CH | - Receiver
| 2.4GHz 6CH | - 3in1 controller
| Gyro, mixer, ESC | - Servos
| Digital 7.5g, 1.0kg/cm, 0.1s/60° |
, , , - CCPM system allows more aerobatic actions and tricks.
, - Symmetrical stronger wooden airfoil has better aerobatic characteristics.
, - Powerful motor allows indoor and outdoor use.
, - 370 super motor provides super power for high performance flight.
, - Simple mechanical structure design, easy maintenance.
, - Durable Material, capable of bearing most crashes without any damage.
, - High performance main rotor blade significantly increase the strength for performing advanced 3D maneuvers.
, - Adjustable Pitch Control System, stainless steel Fly Bar.
, - Fully assembled and tested in the factory.
, - New high-tech 6-channel 2.4G rc system.
, - Digital sub-micro servos offer precise and powerful control.
, ,
The Honey Bee CP3 radio controlled helicopter is the latest ...
NitroTek
- Length
| 640mm | - Height
| 230mm | - Main Blade diameter
| 680mm | - Tail Blades diameter
| 130mm | - Motor gear
| 10T | - Main driven gear
| 140T | - Tail driven gear
| 110T | - Motor
| 450 brushless motor | - ESC
| 25A | - Gyro
| New Esky headlock gyro | - Servo
| Digital *4Pcs | - Transmitter
| 6 channel 2.4Ghz | - Receiver
| 6 channel | - Battery
| Li-polymer 1800mAh, 11.1V, 20C discharge | | Arial, Helvetica, sans-serif; font-size | | | Arial, Helvetica, sans-serif; font-size | | | Arial, Helvetica, sans-serif; font-size | | | Arial, Helvetica, sans-serif; font-size | | | Arial, Helvetica, sans-serif; font-size | | -
, - Driven gear rate: 14:1:5
, , , ,
This is E-Sky's flagship model. Aimed at intermediate to advanced ...
NitroTek
- Main Rotor Diameter
| 475mm | - Length
| 450mm | - Flying Weight
| 293g (Battery included) | - Driven system
| Skyartec 4500KV brushless motor | - Gyro
| Skyartec Head Lock | - Servo
| 3X Skyartec 9g,1X Skyartec 5g | - ESC
| Skyartec 15A | - Battery
| Skyartec 7.4V 900mAh Lithium Li-Po | - Control system
| SKY703 2.4GHz 7 channel Transmitter and Receiver | - Radio Control Range
| 2500 feet (762m) |
, , , - CCPM system allows more aerobatic actions and tricks.
, - Belt driven tail rotor.
, - Symmetrical stronger wooden airfoil has better aerobatic characteristics.
, - Powerful brushless motor allows indoor and outdoor use.
, - 370 super motor provides super power for high performance flight.
, - Simple mechanical structure design, easy maintenance.
, - Durable Material, capable of bearing most crashes without any damage.
, - High performance main rotor blade significantly increase the strength for performing advanced 3D maneuvers.
, - Adjustable Pitch Control System, stainless steel Fly Bar.
, - Fully assembled and tested in the factory.
, - New high-tech 7-channel 2.4G rc transmitter system.
, - Digital sub-micro servos offer precise and powerful control.
, ,
The Wasp V3 rc helicopter is the latest 6 channel ...
NitroTek
- Main Rotor Diameter
| 470mm | - Length
| 460mm | - Flying Weight
| 330g | - Driven system
| Skyartec 4500KV brushless motor | - Gyro
| Sky600 Head Lock | - Serv
| 3X Skyartec 9g + 1X Skyartec 5g | - ESC
| Skyartec 18A | - Battery
| Skyartec 11.1V 900mAh Lithium Li-Po |
, , , - Completely assembled and tested at the factory.
, - 120 degree eCCPM control system.
, - New high-tech 7-channel 2.4Ghz RC system
, - High performance head lock gyro is capable of sport flying and 3D aerobatics.
, - Digital sub-micro servos and micro head lock gyro offer precise and powerful control.
, - Stainless steel fly bar, main shaft and tail shaft.
, - 4500KV brushless motor, 18A brushless ESC and 3S 11.1V 900mAh 20C Li-Po battery deliver incredible power and performance.
, - Auto-rotation system
, - Belt drive system
, - High inertial main blade
, - Shock proof iron landing skids
, - Full ball bearings and metal ball ends
, - Strong carbon fibre tail stand
, - Training set included
, - Spare main rotor blades included
, ,
Skyartec's new flagship model is the Wasp V4 Belt 250. ...
NitroTek
- Width
| 267MM | - Height
| 155MM | - Track
| 240MM | - Length
| 430MM | - Wheelbase
| 280MM | - Gear ratio
| 8.35 | - Engine
| Team Infinity .18 | - Wheel dia.
| 88*34MM(FRONT); 88*41MM(REAR) | - Ground clearance
| 27MM |
, , , - 1/10 Scale nitro radio controlled car
, - 4WD Shaft drive system
, - Infinity powerful .18 pull start engine
, - Oil-filled shocks
, - Single speed gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - High quality 27MHZ CE approved Radio system with changeable crystals
, ,
If you want to race off road and on road ...
NitroTek
- Width
| 330MM | - Height
| 165MM | - Track
| 267MM | - Length
| 390MM | - Wheel base
| 280MM | - Gear ratio
| 10.44 | - Engine
| Team Infinity 18 | - Wheel dia.
| 108*56MM | - Ground clearance (F/R)
| 38MM/46MM |
, , , - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Infinity 18 size pull start engine
, - Oil-filled Alluminium shocks
, - Single speed gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
Unstoppable power allows this off road truck to go where ...
NitroTek
- Width
| 267MM | - Height
| 155MM | - Track
| 240MM | - Length
| 430MM | - Wheelbase
| 280MM | - Gear ratio
| 5.69 | - Engine
| Team Infinity 18 | - Wheel dia.
| 88*34MM(FRONT); 88*41MM(REAR) | - Ground clearance
| 27MM |
, , , - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Fully ball raced system
, - Infinity 18 size pull start engine
, - Aluminium oil-filled shocks
, - Two speed automatic gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - Anti-roll bars pre-fitted
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, , ,
If you want to race off road and on road ...
NitroTek
standard Conquistador and ..." />
- Width
| 330MM | - Height
| 165MM | - Track
| 267MM | - Length
| 390MM | - Wheel base
| 280MM | - Gear ratio
| 10.44 | - Engine
| Team Infinity 18 | - Wheel dia.
| 108*56MM | - Ground clearance (F/R)
| 38MM/46MM |
, , , - Fully Upgraded Special Edition!
, - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Infinity 18 size pull start engine
, - Oil-filled Alluminium shocks
, - Single speed gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
We have taken a standard Conquistador and ...
NitroTek
standard Condor Pro ..." />
- Width
| 267MM | - Height
| 155MM | - Track
| 240MM | - Length
| 430MM | - Wheelbase
| 280MM | - Gear ratio
| 5.69 | - Engine
| Team Infinity 18 | - Wheel dia.
| 88*34MM(FRONT); 88*41MM(REAR) | - Ground clearance
| 27MM |
, , , - Fully Upgraded Special Edition!
, - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Fully ball raced system
, - Infinity 18 size pull start engine
, - Aluminium oil-filled shocks
, - Two speed automatic gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - Anti-roll bars pre-fitted
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
We have taken a standard Condor Pro ...
NitroTek
- Width
| 199MM | - Height
| 115MM | - Track
| 185MM | - Length
| 380MM | - Wheelbase
| 259MM | - Gear ratio
| 5.69 | - Engine
| New Team Infinity 18 | - Wheel dia.
| 64*26MM | - Ground clearance
| 8.5MM |
, , , - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Fully ball raced system
, - Infinity .18 pull start engine
, - Aluminium adjustable oil-filled shocks
, - Two speed automatic gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
Our quickest model, the Cyclone PRO is for the serious ...
NitroTek
- Width
| 199MM | - Height
| 115MM | - Track
| 185MM | - Length
| 380MM | - Wheelbase
| 259MM | - Gear ratio
| 8.35 | - Engine
| New Powerful Team Infinty 18 | - Wheel dia.
| 64*26MM | - Ground clearance
| 8.5MM |
, , , - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Japanese high quality pull start engine
, - Oil-filled shocks
, - Single speed gear box
, - Powerful .18 engine
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
For all the speed junkies! The Cyclone is our quickest ...
BevRC
DPCAV
Hobby-Lobby
HobbyKing
LowPriceRC
ngHobbies
NitroTek
R2Hobbies
RangeVideo
RCTimer
ReadyMadeRC
HobbyWireless
RCPlanet
HorizonHobby
HiModel
OFM
GetFPV
AMainHobbies
SDSHobby
GoodLuckBuy
Flying-Hobby
|
|