ReadyMadeRC
DRAGONOSD+ V2 COMBO: OSD, CURRENT SENSOR, AND GPS
| This package includes | Dragon OSD V2 |
NOW AVAILABLE: CUSTOM CABLE ADAPTERS TO ALLOW YOU TO PLUG THE DRAGONOSD+ DIRECTLY IN TO THE READYMADERC CABLE SYSTEMS. POWERS YOUR DRAGONOSD THROUGH THE VIDEO SYSTEM TOO! AVAILABLE, *Note: will be shipped with the Deans style t-connectors included, but not soldered on. This will allow users of other connections to easily solder on their own connectors.,
The Dragon OSD+ v2 is the newest analog OSD from ...ReadyMadeRC
FY-41AP-A AIRPLANE STABILIZER, AUTOPILOT, AND ON SCREEN DISPLAY
| FY-41AP firmware for fix-wing V1.22 | Download |
| FY module firmware upgrade software and manual | Download |
| The latest FY-DOS&41AP-SETTING software V1.11 for fix-wing | Download |
| FY-41AP manual for fix-wing | Read online |
| More FY-41AP related downloads | Click in |
| FY-41AP OSD display part firmware V1.22a | Download |
| FY module firmware upgrade software and manual | Download |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 6 channels |
| FY-41AP Module Working Voltage | 5.3V@0.2A( Powered by Power Manager) |
| Air speed senor | 0 ~ 200KM/h |
| Power Manager | 35g(50×24×18mm) |
| Working Voltage Range | Power of battery 7~26V (2S ~ 6S) |
| Measuring current | 0~100A |
| Power for FY-41AP module | 5.3V@2A |
| Power for Video transmission system | 12V@2A |
| Operating Temperature | -10°C ~ 50°C |
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,
Introduction FY-41AP is an inertial attitude measurement instrument used for ...ReadyMadeRC
HITEC X1 AC PLUS BATTERY CHARGER
| Part No | 44165 |
Includes:, X1 Charger,
Whoever said you can't take it with you? Our new ...ReadyMadeRC
MULTIPLEX EASY STAR 2 ADJUSTABLE ALUMINUM MOTOR MOUNT
| Position 1 | stock height up to a 7" prop. |
| Position 2 | (+) 0.41" for up to a 8" prop. |
| Position 3 | (+) 1.0" for up to an 9" prop. |
| Total Weight | 16g |
Three step installation:, Attach motor base plate to the stock plastic mount with 4 supplied pan head screws., Included:, 1 - EBS 2 Base Plate and EBS Motor Plate, 4 base screws, 4 motor screws, and 4 mount screws., Notes:, - The stock folding spinner can be utilized with different sized props and motosr with a 3mm or 3.17mm motor shaft.,
This CNC machined aluminum two piece mount is designed to ...ReadyMadeRC
EASY STAR/SKY SURFER/BIXLER ADJUSTABLE MOTOR MOUNT
| Position 1 | stock height up to a 6" prop. |
| Position 2 | (+) 0.41" for up to a 7" prop. |
| Position 3 | (+) 1.0" for up to an 8" prop. |
| Total Weight | 20g |
Three step installation:, , Included:, 1 - Motor Base Tube and Motor Plate, 4 motor screws and 4 mount screws., Notes:, A 35mm outrunner motor will only fit in Position 3 (+ 1.0"). 28mm outrunners will work in any of the three positions. The stock thrust angles are retained in all 3 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Compatible Motors:, , Acceptable bolt patterns (units in mm):, 16x16, 16x19, 19x19, 19x25, 25x25,
This CNC machined aluminum two piece mount is designed to ...ReadyMadeRC
EZOSD WITH XT60 STYLE POWER PLUGS
| EzOSD | The FPVers OSD |
| After-flight debriefing, shows a summary of the flight | Max. altitude, max. distance, max. speed, average speed, distance flown, etc. |
ReadyMadeRC
10HZ GPS EXPANDER MODULE
NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) below is required.,
New GPS Expander Module based on the latest GPS technology. ...ReadyMadeRC
CARBONGEAR C/F MOTOR EXTENSION PLATE FOR DJI FW330/450/550 (4PCS
Includes:, 4 - CarbonGear Motor Extension Plates,
DOES NOT INCLUDE FW450 Phoenix Flight Gear presents the newest ...ReadyMadeRC
DJI FLAME WHEEL F550 BASIC KIT
| Includes | 1× complete frame |
| MSRP | $126 F550 User Manual v1.0： |
ReadyMadeRC
DJI FLAME WHEEL F550 ARF KIT INCLUDES MOTORS, ESC & PROPELLERS
| MSRP | $126 F550 User Manual v1.0： |
| Stator size | 22x12mm |
| Current | 30A OPTO |
| Signal Frequency | 30Hz ~ 450Hz |
| Battery | 3S ~ 4S LiPo |
| Dimensions | 10 x 4.5 in; 8 x 4.5 in |
| Provide different color frame arms | red, white, black, which makes your flight more colorful. |
Includes:, 6× ESC(30A), 6× Motor(2212), 6× blades(10inch), 1× complete frame, Flame Wheel F550 ARF Kit Includes:, , KV: 920 rpm/V,
Flame Wheel F550 ARF Kit set $390 FlameWheel series is ...ReadyMadeRC
DJI FLAME WHEEL F450 BASIC KIT
| Includes | 1× complete frame |
| MSRP | $80 |
ReadyMadeRC
DJI FLAME WHEEL F450 ARF KIT INCLUDES MOTORS, ESC & PROPELLERS
| MSRP | $80 |
| Stator size | 22x12mm |
| Current | 30A OPTO |
| Signal Frequency | 30Hz ~ 450Hz |
| Battery | 3S ~ 4S LiPo |
| Dimensions | 10 x 4.5 in; 8 x 4.5 in |
| Provide different color frame arms | red, white, black, which makes your flight more colorful. |
Includes:, 4× ESC(30A), 4× Motor(2212), 4× blades(8inch), 4× blades(10inch), 1× complete frame, Flame Wheel F450 ARF Kit Includes:, , KV: 920 rpm/V,
Flame Wheel F450 ARF Kit set $240 FlameWheel series is ...ReadyMadeRC
DJI FLAME WHEEL F330 BASIC KIT
| Includes | 1× complete frame |
| Frame Only MSRP | $50 |
ReadyMadeRC
DJI FLAME WHEEL F330 ARF KIT INCLUDES MOTORS, ESC & PROPELLERS
| Frame Only MSRP | $50 |
| Stator size | 22x12mm |
| Current | 30A OPTO |
| Signal Frequency | 30Hz ~ 450Hz |
| Battery | 3S ~ 4S LiPo |
| Dimensions | 10 x 4.5 in; 8 x 4.5 in |
| Provide different color frame arms | red, white, black, which makes your flight more colorful. |
Includes:, 4× ESC(18A), 4× Motor(2212) ,4× blades(8inch) ,1× complete frame, Flame Wheel F330 ARF Kit Includes:, , KV: 920 rpm/V,
Flame Wheel F330 ARF Kit set $218 FlameWheel series is ...ReadyMadeRC
SZD-45 OGAR (PRE-ASSEMBLED COMBO)
| Wing Span | 98.5 in / 2500 mm |
| Wing Area | 667 sq in / 43 sq dm |
| Flying Weight | 46 oz / 1300 g |
| Fuselage Length | 45 in / 1145 mm |
| Requires (minimum) | 4-channel radio, 20A brushless ESC, 3 cells 11.1V 15C 1800mAh Li-Po battery and charger. |
| Recommended | Brushless ESC |