Quadcopter Frame Page 52 Review

HobbyWireless

COMPLETE OSD PRO 100A 10HZ GPS AND AUTO-PILOT SYSTEM W/ CONNECTORS - V4

New	Artifical Horizon Display
Web Site	www.eagletreesystems.com/Support/support.html
BELLEVUE, WA 98006 Phone	425-614-0450

Details:, , Here are some examples:, * GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), Instruction Manual:, Click Me!, See the video below for an example of the AHI display tracking the horizon:, , Package Includes:, , E-mail:, sales@eagletreesystems.com,

We’re pleased to introduce the Eagle Tree OSD Pro.The OSD ...

HobbyWireless

COMPLETE OSD PRO 100A 10 HZ GPS AND AUTO-PILOT SYSTEM W/ WIRE LEADS - V4

New	Artifical Horizon Display
Web Site	www.eagletreesystems.com/Support/support.html
BELLEVUE, WA 98006 Phone	425-614-0450

We’re pleased to introduce the Eagle Tree OSD Pro.The OSD ...

HobbyWireless

CRANE III FULLY ASSEMBLED CAMERA GIMBAL WITH SERVOS

Features	► 6061 CNC Metal.
► Size	170 x 160 x 75.
► Weight	312g.
► Side tilt	± 18.5 degrees.
► Vertical tilt	± 60 degrees.
Delivery content	► CRANE

Details:,

► 100% Full Carbon Fiber Frame. ► Special engineered design ...

HobbyWireless

CRANE II FULLY ASSEMBLED CAMERA GIMBAL SET WITH SERVOS

Features	► 6061 CNC Metal.
► Size	125 x 115 x65.
► Weight	97g.
► Side tilt	± 22.5 degrees.
► Vertical tilt	± 120 degrees.
Delivery content	► CRANE

Details:,

► 100% Full Carbon Fiber Frame. ► Special engineered design ...

HobbyWireless

GAUI 500X QUAD FLYER COMBO (MOTORS, ESC, BAG, NO GU-344)

(v) Battery	type (LiPo) qty. (1)
Dimension	(64)cm x (17)cm x (13.5)cm
Dimension	(?)cm x (?)cm x (?)cm

Details:, 500X was designed based on UAV, advantages are:, , 1. Flight Efficiency: Standard Battery (2S2000mAh) time of flight for more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation), 2. Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft, 3. High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle., 4. Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs), you can install cameras and video recorder, and other system., Note:, For users who have transplanted GAUI 330X / 330X-S power systems (motors, ESCs) to the 500X Upgrade kit, please use 8 inch propellers., Powered by:, , Product packing:, , Export Carton (LNK):, , Manual:,

5. Operation mode and flight characteristics are similar to helicopter, ...

HobbyWireless

DJI WKM + S800 COMBO

Features	1. High Stability
1. Diagonal axis length	800 mm
2. Takeoff Weight	6 kg
3. Load Weight	2 kg
Built-In Functions	Autopilot, Auto Hover Fail Safe
Multi Rotor Types	Quad-Rotor, Hex-Rotor, Octo-Rotor
Supported ESC output	200Hz refresh frequencys
Recommended Transmitter	PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels
Recommended Power Supply	DC 4.8 ~ 12V
Power Consumption	MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V)
Hovering Accuracy	Vertical
Suitable Wind Condition	< 8m/s (17.7mph)
Max Rotate Angle	30°
Vertical Speed	3m/s
Total Weight	<= 150g
Dimensions	Main Controller
IMU	40mm x 31mm x 26mm
GPS & Compass	50mm (diameter) x 9mm
LED Indicator	25mm x 25mm x 7mm

Details:, , S800 Package Includes:, Arm (ESC 2-6S 40A; Motor 4114 kv320) x 6 pcs, Technical Specs:, Features:, , Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.),

The "SPREADING WINGS S800" is DJI's latest "Hex-Rotor" platform. The ...

HobbyWireless

BIG - T-REX 600 NITRO PRO KIT FIBERGLASS CANOPY

9.Main Gear Radio 8.5	1, 1500-2200 Rotor RPM.
Length	1160mm
Height	410mm
Main Blade Length	600mm
Main Rotor Diameter	1350mm
Tail Rotor Diameter	240mm
Engine Pinion Gear	20T
Autorotation Tail Drive Gear	180T
Drive Gear Ratio	8.1
Flying Weight	Approx. 3200g

Details:, 1.Both the T-Rex 600 Nitro and 600 Nitro Pro include a Beautiful factory painted fiberglass canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal., Specifications:, , Accessories:, , Radio transmitter and electronic equipment required for assembly:, Transmitter(6-channel or more, helicopter system),

2.Simple and light weight design provides awesome flight performance nearly ...

HobbyWireless

GAUI 500X QUAD FLYER UPGRADE KIT

Crossing distance	500mm motor shaft to motor shaft
Propeller size	8~10 inch.(Option, not included in this package)
Motor	960KV brushless motor (Option, not included in this package)
ESC	10~18A ESC (Option, not included in this package)
Stabilizer System	GU-344 (Option, not included in this package)
Weight	520~670g (with recommended standard power package, without battery)

Details:, This is any upgrade kit, great kit for the 330X owners or even to those wanting to install their on electronics., Features:, ,

It has a neat and well built carbon fiber Frame, ...

HobbyWireless

FPV-PRO905 KIT 500MW 900MHZ DOUBLE RECEPTION - BEST 900 MHZ SYSTEM - CAMERA IS OPTIONAL

Nominal output impedance	50 ohms
Operating Voltage	10.5 - 13 volts DC
75-ohm impedance	1Vp-p
10k ohm impedance	1Vp-p
Sub carrier frequency	6.5MHz
Operation temperature	-10 to 40 degrees Celsius
Storage temperature	-40 to 80 degrees Celsius
Operating humidity	20 to 80%

Details:, If you're looking for a rock solid FPV system with great front and back reception and minimum video drops, then you've got to have this kit., This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., For patch antennas position: Place each antenna opposing each other (back to back) pointing 45° or less towards the sky and your video reception will be fully covered front, above and behind., The plug and play board main features:, , Package includes:, - 1x Plug and Play transmitter 500mW 900MHzwith built-in microphone with, Specifications:, , Notes:, - The transmitter will have only the channel 1 (910 MHz) available to USA users to comply with FCC rules., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,

Besides this kit with can also be used with your ...

HobbyWireless

FPV-PRO1012 KIT 1000MW 1.2 GHZ DOUBLE RECEPTION - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS - CAMERA IS OPTIONAL

Nominal output impedance	50 ohms
Operating Voltage	10.5 - 13 volts DC
75-ohm impedance	1Vp-p
10k ohm impedance	1Vp-p
Sub carrier frequency	6.5MHz
Operation temperature	-10 to 40 degrees Celsius
Storage temperature	-40 to 80 degrees Celsius
Operating humidity	20 to 80%

Details:, If you're looking for a rock solid FPV system with great front and back reception and minimum video drops, then you've got to have this kit., This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., The plug and play board has lots of important features built-in such as:, , Package includes:, - 1x Plug and Play transmitter 1.2 GHz 1000mW with built-in microphone with, Specifications:, Notes:, - The transmitter will have only the channel 8 (1280 MHz) available to USA users. Transmitters shipped to customers out of USA will have all channels available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,

Besides this kit with can also be used with your ...

HobbyWireless

FPV-PRO1024 KIT 1000MW 2.4GHZ + DIVERSITY RECEIVER DOUBLE RECEPTION - LAWMATE - CAMERA IS OPTIONAL

Nominal output impedance	50 ohms
Operating Voltage	10.5 - 13 volts DC
75-ohm impedance	1Vp-p
10k ohm impedance	1Vp-p
Sub carrier frequency	6.5MHz
Operation temperature	-10 to 40 degrees Celsius
Storage temperature	-40 to 80 degrees Celsius
Operating humidity	20 to 80%

Details:, , This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., The plug and play board has lots of important features built-in such as:, , Package includes:, - 1x Plug and Play transmitter 2.4 GHz 1000mW with built-in microphone (USA customers only channel 1 is available. It does not affect the performance of the transmitter), Specifications:, Note:, If you are not going to run your RC model, do not turn this transmitter on and leave it on for several minutes, it can overheat damaging the unit! It is 1000mW transmitter in a tiny metal box!!!, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,

If you're looking for a rock solid FPV system with ...

HobbyWireless

AEROSIM RC - FPV SIMULATOR - NEW FEATURES!

Details:, , New released features:, , Note for MAC users:, The MAC version is not supported directly from us. However, many MAC users have reported that AeroSIM RC runs fine in a MAC in several configurations., exclusive features:, - Full FPV support with Camera Pan&Tilt from your Transmitter,,

The first FPV flight simulator allows you to practice to ...