ReadyMadeRC
IRC - 5.8 GHZ SPIRONET OMNI SMA ANTENNA SET (LHCP)
Notes:, - When flying mutiple pilots at once, on 5.8GHz, interleaving RHCP and LHCP antennas will allow 2x the number of pilots to fly at once.,
SpiroNET 5.8GHz circular polarized antenna from ImmersionRC and FatShark. Left ...ReadyMadeRC
RMRC SKYHUNTER - KIT
| ATTENTION | According to |
| Wingspan | 1800MM |
| Length | 1400MM |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless outrunner motor 2820-3540, 800-1400kv (9-12" prop) |
| ESC | 40A - 60A |
| 3 Servos | HS-85MG |
| Battery | Li-Po 3s-4s 5000mAH - 10,000mAH (TB54 max. 3S) |
| Center of Gravity | 1/3 of wing from leading edge |
Here is an build video series on the Sky Hunter:,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
RMRC ANACONDA - KIT
| Wingspan | 2,060mm |
| Wing Area | Approx. |
| Length | 1,410mm |
| Motor | 35-48 800-1000kv Brusless outrunner |
| Propeller | 13x6.5 E or 14x5.5 E (Not included) |
| ESC | 60-80A ESC with switch mode BEC |
| Servos | 3x 30g and 2x 17g Metal Gear Digital |
| Flap servos | HS-81 |
| Battery | Li-Po 4s 5,000mAH - 20,000mAH (Additional nose weight needed with smaller batteries) |
| Center of Gravity | 1/3 of wing from leading edge at the main spar |
| Approximate flight duration | 45 minutes to over an hour depending on configuration |
| Fuselage dimensions (Inside) | L 66cm (26.5") x W 15cm (6") x H 8cm (3") |
| RcGroups.com Unboxing Video with Jim Graham | (PNP version shown) |
Features:, , Specifications:, , Control:, Width, Looking inside the fuselage:, , Notes:,
Anaconda KIT After months of testing, we are proud to ...ReadyMadeRC
RMRC ANACONDA - PNP (WITH INSTALLED MOTOR, ESC, AND SERVOS)
| Wingspan | 2,060mm |
| Wing Area | Approx. 4,900cm |
| Length | 1,410mm |
| Motor | RMRC Tiger Motor Brushless Outrunner AT3520-5, 800kv (6mm prop adapter shaft) |
| Propeller (sold separately) | Recommend |
| ESC | RMRC Tiger Motor 80A ESC with switch mode BEC (T-Plug connector) |
| Servos | 3x 30g and 2x 17g Metal Gear Digital (does not include 2x servos for flaps) |
| Recommended Flap servos | HS-81 |
| Battery | Li-Po 4s 5,000mAH - 20,000mAH (Additional nose weight needed with smaller batteries) |
| Center of Gravity | 1/3 of wing from leading edge on the main spar |
| Approximate flight duration | 45 minutes to over an hour depending on configuration |
| Fuselage dimensions (Inside) | L 66cm (26.5") x W 15cm (6") x H 8cm (3") |
Features:, , Specifications:, , RMRC's Setup for the Anaconda:, , RcGroups.com Unboxing Video with Jim Graham:, , Looking inside the fuselage:, , Notes:, , Can be broken down for transport:, Picture courtesy of ducatirdr from RCGroups.com,
Anaconda PNP - with installed Motor, ESC, and Servos After ...ReadyMadeRC
HERO4 BLACK
Special RMRC Promotion:, Every HERO4 Black purchase will include a FREE 16GB Class 10 Micro SD card, a FREE RMRC Go-Protector with with polarized and clear lens, and a FREE RMRC HERO3/4 Cable of your choice, PLUS receive free shipping using the coupon code SHIPPINGDEAL, What's Included:, , Restrictions:, According to GoPro policy, sales of the GoPro cameras from this store are restricted to the United States only.,
SIGN UP FOR IN STOCK NOTIFICATION BELOW. AVAILABLE FOR ORDER ...ReadyMadeRC
HERO4 SILVER
Special RMRC Promotion:, Every HERO4 Silver purchase will include a FREE 16GB Class 10 Micro SD card, a FREE RMRC Go-Protector with with polarized and clear lens, and a FREE RMRC HERO3/4 Cable of your choice, PLUS receive free shipping using the coupon code SHIPPINGDEAL, What's Included:, , Restrictions:, According to GoPro policy, sales of the GoPro cameras from this store are restricted to the United States only.,
SIGN UP FOR IN STOCK NOTIFICATION BELOW. AVAILABLE FOR ORDER ...ReadyMadeRC
RMRC 3A POWER REGULATOR - 12 VOLT (UBEC)
| Output | 12V 3A continuous, 4A burst |
| Input | 14v-35v (4-8S Lipo) |
| Size | 42x22x8.5mm |
| Weight | 20g including cables |
Specifications:, , WARNING:, Please make sure you know what voltage your system requires before powering up!,
High quality Ready Made RC, LLC 12V 3A UBEC w/ ...ReadyMadeRC
200 QX BNF WITH SAFE
| Type | Quad-Copter |
| Main Rotor Diameter | 4.45 in (113mm) |
| Length | 5.59 in (142mm) |
| Kit/ARF/RTF | BNF |
| Experience Level | Intermediate |
Is Assembly Required: No,
Features SAFE™ Technology equipped Three flight modes High performance brushless ...ReadyMadeRC
PHOENIX R/C PRO SIMULATOR V5.0
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8/DX10T/DX18 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Features:, , Overview:, Whenever weather, schedules or circumstances conspire to keep you from the flying field, scratch your flying itch with the latest Phoenix Professional RC Flight Simulator, version 5.0. Stunning graphics and incredibly realistic physics have made the Phoenix simulator not only one of the best desktop flight simulators, but a virtual RC experience with just about all the benefits of an RC club and flying field. This newest version features definitively refined physics plus new companion software you can use to create your own models, fly them and then share them online. It’s always a perfect time to fly with the Phoenix Professional RC Flight Simulator., Tech Notes:, To successfully use Phoenix, you will need the following:, • IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, • An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, • Boot Camp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., supported:,
Improved airplane physics rebuilt from the ground up, plus industry-leading ...ReadyMadeRC
EYEFLY - HAMMERHEAD NANO FRAME - G10 GLASS FIBER
| Motors | Tiger MT1306 |
| ESCs | 6A-10A |
| Control unit | CC3D |
| Propellers | GemFan or HQ 5" |
| Camera | FatShark 600tvl |
| Centerplates & motor mounts | 50g |
| Polyamide-parts | 20g |
| Arms | 19g |
| Screws, nuts, etc | 38g |
Our new frame, the "Hammerhead Nano" was designed with the following goals:, , Weight:, ,
The foldable "always-at-hand"-frame that will never leave your side! This ...