HobbyWireless
FATSHARK DOMINATOR HEAD TRACKER MODULE
| - Futaba | in general Futaba 7 series radios and above support the HT |
| Unsupported radios | - Hitec Aurora9 |
Details:, This Head tracker module is specially and exclusively designed for the FatShark Dominator video glasses only., Known Supported radios:, - ezUHF (note ezUHF supports HT independently from the radio used, if your radio does not support HT, then can add HT via ezUHF, : The HT PCB can be easily damaged by accidentally applying voltage to the PPM line or vise versa, damage your radio. Fat Shark will not warranty any damage due to modified cables. Cables are inexpensive and in stock at most retailers.,
Thanks to the modular feature of Dominator video glasses, this ...HobbyWireless
RSSI BUFFER FOR OSD PRO
| Operating Voltage | 5VDC (powered by EagleTree eLogger). |
| Current Draw | 2 milliamps. |
| RSSI Voltage Range | 0 - 4.0 VDC. |
| RSSI Input ohms | > 1 megohms (DC). |
| Input Impedance | 330K ohms (AC). |
| Size/Weight | 0.45 x 0.73 inches (11 x 19 mm), 2 grams. |
| Operating Voltage | 5.0VDC (4.5 - 5.5 VDC allowed). |
| Current Draw | 2 milliamps. |
| RSSI Range | 0 - 4.0 VDC. |
| RSSI Input ohms | > 1 megohm. |
| RSSI Impedance | Input IN1 = 330K ohms @ 1KHz. |
| Size/Weight | 0.45 x 0.73 inches (11 x 19 mm), 2 grams. |
| can be used with other OSD designs if the 3-wire cable’s pinout is observed, as follows | Black Wire |
| Red Wire | Buffered RSSI signal output (to OSD) |
| White Wire | Not Used (no connection) |
Details:, The RSSI Buffer is a tiny-sized accessory that is used to connect a R/C receiver's analog RSSI (relative signal strength indication) signal to the EagleTree eLogger V3 / OSD Pro system. It uses the TEMP1 input on the eLogger V3 telemetry module., Specification and Features:, Installation Instructions:, Click Me!, Installation Video:, Click Me!, Cable Pin-Out Information:, , Note:, Common circuit ground is provided by the IN1 or IN2 signal ground connection. Please,
This RSSI buffer is recommended for all EagleTree OSD-Pro installations ...RCPlanet
ALIGN T-REX 700E DFC HV SUPER COMBO HV BRUSHLESS SERVO AGNKX018E15
, 3GX Programmable Flybarless System, Operating Temperature:, -10~60 degree, X and Y axis Operating Angle Range:, -300~+300 degree, Z axis Operating Angle Range:, -600~+600 degree, Size:, 36.5x25.2x15.6mm, Weight:, 11g, Maximum working voltage:, 8.5V, T-Rex 700E DFC, Length:, 1345mm, Height:, 360mm, Width:, 208mm, Main Blade Length:, 690mm, Main Rotor Diameter:, 1562mm, Tail Rotor Diameter:, 281mm, Motor Drive Gear:, 12T, Main Drive Gear:, 112T, Autorotation Tail Drive Gear:, 104T, Tail Drive Gear:, 22T, Drive Gear Ratio:, 1:9.33:4.37, Weight(With Motor):, 2900g, ,
This is the Align T-Rex 700E DFC HV Super Combo ...Hobby-Lobby
STANDARD SERVO EXTENSION 12"
Spektrum ..." />
,
Standard Servo Extension 12" Gold-plated contacts designed specifically for Spektrum ...Hobby-Lobby
HEAVY-DUTY SERVO EXTENSION 12"
Spektrum ..." />
,
Heavy-Duty Servo Extension 12" Gold-plated contacts designed specifically for Spektrum ...Hobby-Lobby
HEAVY-DUTY SERVO EXTENSION 9"
Spektrum ..." />
,
Heavy-Duty Servo Extension 9" Gold-plated contacts designed specifically for Spektrum ...Hobby-Lobby
STANDARD SERVO EXTENSION 6"
Spektrum ..." />
,
Standard Servo Extension 6" Gold-plated contacts designed specifically for Spektrum ...Hobby-Lobby
HEAVY-DUTY SERVO EXTENSION 6"
Spektrum ..." />
,
Heavy-Duty Servo Extension 6" Gold-plated contacts designed specifically for Spektrum ...Hobby-Lobby
STANDARD Y-HARNESS 6"
Spektrum ensure ..." />
,
Standard Y-Harness 6" Gold-plated contacts designed specifically for Spektrum ensure ...Hobby-Lobby
HEAVY-DUTY Y-HARNESS 6"
Spektrum ensure ..." />
,
Heavy-Duty Y-Harness 6" Gold-plated contacts designed specifically for Spektrum ensure ...Hobby-Lobby
XPLUS8 EXPANSION MODULE
,
XPlus8 Expansion Module The X-Plus 8 module is designed to ...Hobby-Lobby
PRO RADIO BAG: DX5/6/7/8
| Pro Radio Bag | DX5/6/7/8 |
Hobby-Lobby
ANYLINK 2.4GHZ RADIO ADAPTER
INCLUDES:, Tactic AnyLink SLT 2.4GHz Radio Adapter,
ANYLINK 2.4GHZ RADIO ADAPTER Expands the ability to fly a ...Hobby-Lobby
150MAH WALL CHARGER WITH TRANSMITTE
Spektrum transmitters ..." />
Key Features:, Charges 4.8V receiver packs,
150mAh Wall Charger with Transmitte Works with all Spektrum transmitters ...Hobby-Lobby
DX7S 7 CH W/ AR8000 NO SX'S MD2
| Modulation | DSM2/DSMX |
| Band | 2.4GHz |
| Programming Features | Airplane and Heli |
| Transmitter (Tx) Battery Type | 4 Cell 2000mAh NiMH |
DX7s 7 Ch w/ AR8000 NO SX's MD2 Highlights:, 20 Model Memory, Technical Specifications:, DX7s 7 Ch w/ AR8000 NO SX's MD2 Specs:, Number of Channels:7, Model Memory:20, Modes:, Selectable 1, 2, 3 or 4, Charger:, International AC Adapter,
DX7s 7 Ch w/ AR8000 NO SX's MD2 DX7s 7 ...