HobbyKing
6INCH RATCHET CLAMP TOOL
| Max opening | 3.5cm |
5 Reviews
HobbyKing
TURNIGY T600 BRUSHLESS OUTRUNNER FOR 600 HELI (1400KV)
| Weight | 349g |
| Voltage | 5~8S |
| Max Current | 110A |
| Diameter of shaft | 6mm |
| Length of front shaft | 21mm |
| ESC | 150A |
Specifications:, Dimension:, 58mm x 49mm, 78mm(with shaft), Kv:1400rpm/V, Turns:8T,
Is your 600 heli ready for the next level in ...5 Reviews
HobbyKing
TURNIGY A-6-10 200W BALANCE CHARGER & DISCHARGER
| Input Voltage | 10~18v |
| Circuit power | Max Charge |
| 200W / Max Discharge | 25W |
| Discharge current range | .1~5.0A |
| Ni-MH/NiCd cells | 1~18 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~24v |
| Weight | 540g |
| Dimensions | 143x124x37mm |
Charge Current Range: .,
An advanced and powerful charger, the Turnigy A6-10 is able ...5 Reviews
HobbyKing
TURNIGY 1015 BRUSHLESS INRUNNER MOTOR 11500KV
| Battery | 1 Cell 1S/3.7V |
| RPM | 11500kv |
| No load current | 3.7V/0.4A |
| Current capacity | 4A/1sec |
| Internal resistance | 0.51ohm |
| Dimensions | 10x15mm |
| Diameter of shaft | 1mm |
| Length of front shaft | 5mm |
Max current:4A, Weight:, 5.1g (kv11500) (not including connectors),
Micro brushless inrunner. Spec. Suited for Mini EDF or micro ...5 Reviews
HobbyKing
SCM 3213 950KV BRUSHLESS OUTRUNNER
| Battery | 2-3 Lipoly |
| Max Eff | 81% |
| Max Current | 5 to 9A (over 74% efficiency) |
| Int. Resistance | 260mohm |
| 10v no Load current | .65A |
| Dimensions | 25.7 x 26mm |
| Shaft | 3mm |
| Weight | 45g |
| Model Size | up to 300-580g |
| Recommended Prop | 9x5 3S / 10x5 2S |
Kv: 950rpm/v,
Spec.5 Reviews
HobbyKing
KD36-60-06L 4000KV BRUSHLESS INRUNNER (11T)
| Dimensions | 36~60mm |
| Shaft size | 5mm |
| Weight | 260g |
| Idle Current | 5.9A |
| Resistance | .0044 |
| Max Amp | 100A |
Kv: 4000rpm/V (11T),
The KD36 inrunners are equivilent to 540 size motors. Front ...5 Reviews
HobbyKing
HACKER STYLE BRUSHLESS OUTRUNNER 20-28M
| Dimentions | 28x28mm |
| Rating | 1050kv |
| Battery Config | 3 Lipo Cells |
| Shaft | 3.175mm |
| Weight | 43gr |
| Standard Current | 4-12A |
| Max Current | 15A |
| Suggested Prop | 9x4.7 |
5 Reviews
HobbyKing
TURNIGY G46 BRUSHLESS OUTRUNNER 670KV (.46 GLOW)
| RPM | 670kv |
| Max current | 40A |
| No load current | 10V/3.9A |
| Current capacity | 55A/15sec |
| Internal resistance | 0.04 ohm |
| Diameter of shaft | 6mm |
| Dimensions | 76x50mm |
Battery:, 4~5 Cell /14.4~18.5V, Weight:, 303g (not including connectors),
Designed to be a direct swap out for your .40 ...5 Reviews
HobbyKing
HEXTRONIK DT700 BRUSHLESS OUTRUNNER 700KV
| Required Voltage | 11.1v |
| Suggested Battery Capacity | 1300mAh + |
| Suggested Prop | 10x4.7, 11x3.8 or 11x4.7 |
| Max current draw | 13A (with 11x4.7 prop) |
| Max thrust | 900g+ |
| No Load Current | 1.2A |
| Shaft | 4M (perfectly suited to Towerpor/GWS SF Slow Fly props) |
| Weight | 78g |
| Diameter | 41mm |
| Overall length | 77mm |
Kv: 700rpm/v,
Looks can be deceiving. This outrunner is around twice the ...5 Reviews
HobbyKing
FUTABA GY520 GYRO
| Width | 0.79in(20mm) |
| Length | 0.79in(20mm) |
| Height | 0.39in(10mm) |
| Weight | 0.243oz(6.9g) |
| Max. operating voltage | 3.8~6.0V(gyro only) |
| Current drain | 40mA(gyro only) |
| Operating temperature | 14~113F |
Features:, Offers premium performance at a surprisingly affordable price, Specifications:, Selectable servo frame rate:, 70Hz, 280Hz, and 560Hz, Center pulse width:, 1520us(70Hz & 280Hz frame rate), Flight mode:, User selectable F3C or 3D, Control system:, Advanced PID control, Sensor:, MEMS vibrating structure gyro, Angular velocity range:, +- 800 degrees per second, Recommended Servos:, 250~450 size electric:, Futaba S9257 EP Heli Digital (280Hz/1520us), .31~.91 size helicopter:, Futaba S9254 Digital Heli servo (280Hz/1520us),
Futaba GY520 The smallest, lightest and most advanced gyro in ...5 Reviews
HobbyKing
TURNIGY AQUASTAR 90A WATER COOLED ESC
| Brake | (None/Soft) |
| Throttle range | 640uS |
| Constant Current | 90A |
| Burst Current | 110A |
| Battery | 2-6S Lipoly |
| BEC | 3.5A/5v switching BEC, max 4A |
| Motor Type | Sensorless Brushless |
| Size | 90 x 36 x 20mm |
| Weight | 97g |
5 Reviews
HobbyKing
HOBBYKING VARIABLE 6S 50W 5A BALANCER/CHARGER W/ ACCESSORIES
| Input Voltage | 11~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~6.0A |
| Ni-MH/NiCd cells | 1~15 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 193g |
| Note | Power supply not included. |
5 Reviews
HobbyKing
TURNIGY 28-22-CQ 1400KV BRUSHLESS OUTRUNNER
| Model | TR-28-22-CQ |
| Weight | 36g |
| Pull | 100~450g |
| Prop | 8x4 or 9x5 |
| Voltage | 6~9v |
| Length | 23mm |
Max Eff: 5A, Max Load: 8A, Kv: 1400,
5 Reviews
HobbyKing
HOBBYKING AP05 3000KV BRUSHLESS MICRO MOTOR (5.4G)
| Lipo Range | 1~2S (3.7~7.4V) |
| Suggested prop | 5030 |
| Weight | 5.4g (including mount and wire) |
| Shaft | 1.5mm |
| Shaft length | 14mm |
| Dimensions | 14 x 13mm |
| Current | 2.8A |
| Thrust | 110g |
Kv: 3000rpm/v, Max current: 3A, Burst current (5sec): 4A, Test data:, 5030 prop (Recommended), Voltage: 7V,
High quality micro motors. Precision wound with silver-copper wire and ...5 Reviews
HobbyKing
TOKI BIOWIRE 1G MICRO SERVO (WORLD FIRST)
| Dimensions | 38 x 9 x 3 (mm) |
| Weight | 0.8g (except a horn, a connector and cable) |
| Actuator | BMF65 x 120 mm (wight |
| Materials | body; ABS, built in parts and horn ; POM, PC boad ; Lead-free solder |
| Torque | approx. 15 gCm |
| Operational Angle | 30 degrees, right and left each side |
| Power Supply Voltage | 3-5V |
| Max. Current Consumption | 80mA, 0.3W (at right or left end point @ 4.8V ) |
| Input Line | 3 wire type; power supply (red +, black -), signal (white) |
| Control Signal | positive PWM signal of 1.5ms ± 0.5ms in every 20ms |
| Operating Temperature | 0-40 degrees (Celsius) |
5 Reviews