ReadyMadeRC
EV-PEAK - V680AC - 80W AC/DC CHARGER/DISCHARGER
| 3. Accepts all types of R/C batteries | LiPO/LiFe/NiMH/NiCd/Pb. |
| AC Input voltage | 100-240V |
| DC Input Voltage | 11-18V |
| Charge power max | 80W |
| Discharger power max | 10W |
| Charge current range | 0.1-6.0A |
| Discharge current range | 0.1-2.0A |
| Balance tolerence | ±0.01V |
| NiCd/NiMH battery cell count | 1 - 15cells |
| LiPo/LiLo/LiFe battery cell count | 1 - 6series |
| Pb battery voltage | 2 V - 20V |
| Weight | 640g |
| Dimensions | 145*145*56mm |
What makes this charger a good choice for you? Here are a few of our reasons:, , Additional Features:, 1. Creates a safe charging condition and minimizes the danger caused by negligence and user setting errors., Specifications:, , Included Accessories:, , Optional ReadyMadeRC Charge Harness:,
The V680AC is a feature-rich charger in a small package! ...ReadyMadeRC
CELLPRO POWERLAB 8 V2 WITH EC5 INPUT CABLE, 1344W
| Pack capacity | 20 mAh to 360Ah |
| Voltage resolution | 78uV (16 bit) |
| Voltage tolerance | +/- 6mV |
| Charge current | +/- 1% |
| Capacity added to pack | +/- 1% |
| Percent capacity (“Fuel”) | +/- 5% (with accurate fuel table defined for battery being charged) |
For Battery types:, Lithium Polymer (1s to 8s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 8s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 8s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 8s balanced, 1s to 10s unbalanced), NiCd (1s to 21s), NiMH (1s to 21s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA), Input voltage:, 10-32VDC, reverse polarity protected, Input current:, 1A to 60A, software limited, Power conversion:, Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current, Output battery charge current:, Adjustable range 10mA to 40A, limited by 60A input current*, Output battery discharge current:, Internal discharge 10mA to 10A, 100W max Regenerative discharge 10mA to 40A, 1344W max**, Continuous max output power:, 612W @ +12VDC input, 1344W @ +26.35VDC, Cell balancing:, Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging, Voltage calibration:, Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV, Current calibration:, Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA, Measurement accuracy:, Serial data output:, 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity, Data integrity:, Checksum, CRC checking, Cooling fans:, Twin, 13 CFM, 50mm diameter, Heat sink:, Internal 200W aluminum, thin finned, Output battery connector:, “Cellpro” compatible, JST PA series, 9 position, LCD:, 2 line, 16 character, light grey/blue backlit, Size:, 5.82" x 6.55" x 3.57", Footnotes:, *,
UNLEASH THE POWER! The industry's first 1344W Battery Workstation now ...ReadyMadeRC
CELLPRO POWERLAB 6 V2 WITH EC5 INPUT CABLE, 1000W
| Pack capacity | 20 mAh to 360Ah |
| Voltage resolution | 78uV (16 bit) |
| Voltage tolerance | +/- 6mV |
| Charge current | +/- 1% |
| Capacity added to pack | +/- 1% |
| Percent capacity (“Fuel”) | +/- 5% (with accurate fuel table defined for battery being charged) |
More on the PowerLab Philosophy:, Power is important, but means little without other key features of SAFETY,RELIABILITY, FLEXIBILITY, and INTUITIVE OPERATION; the key elements that are painstakingly crafted into the Cellpro product line. The competition will come along with powerful chargers after we lead, but they will have trouble harnessing this power., SPECFIFICATIONS:, For Battery types:, Lithium Polymer (1s to 6s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 6s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 6s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 6s balanced, 1s to 8s unbalanced), NiCd (1s to 19s), NiMH (1s to 19s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA), Input voltage:, 10-32VDC, reverse polarity protected, Input current:, 1A to 40A, software limited, Power conversion:, Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current, Output battery charge current:, Adjustable range 10mA to 40A, limited by 40A input current*, Output battery discharge current:, Internal discharge 10mA to 8A, 50W max Regenerative discharge 10mA to 40A, 1000W max**, Continuous max output power:, 408W @ +12VDC input, 1000W @ +30VDC, Cell balancing:, Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging, Voltage calibration:, Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV, Current calibration:, Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA, Measurement accuracy:, Serial data output:, 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity, Data integrity:, Checksum, CRC checking, Cooling fans:, Single, 13 CFM, 50mm diameter, Heat sink:, Internal 120W,
POWER Welcome to PowerLab 6, the second offering in the ...ReadyMadeRC
FR SKY - TARANIS X9D TRANSMITTER, MODE 2, 2000MAH (NO RECEIVER)
Note:, This is is the latest version from Fr-Sky that does not include the aluminum case, but has the increased capacity, 2000mAH battery., Model:, , Operating Temperature Range:, , Operating System:, , Transmitting Frequency:, , System:, , Power Supply:, , Current Drain:, , Operating Humidity:, , Includes:, , UHF Pin-Out:,
FEATURES Quad Ball Bearing Gimbals Receiver Match Audio Speech Outputs ...ReadyMadeRC
FR SKY TARANIS X9D TRANSMITTER MODE 2 PICK YOUR RECEIVER COMBO
Model:, , Operating Temperature Range:, , Operating System:, , Transmitting Frequency:, , System:, , Power Supply:, , Current Drain:, , Operating Humidity:, , Includes:,
This package replaces the aluminum lined case and replaces it ...ReadyMadeRC
PARALINX ARROW - HD TRANSMITTER AND RECEIVER SET
| Supported framerates | 23.98p, 24p, 25p, 29.97p, 30p, 50i, 50p, 59.94i, 60i, 60p |
| Transmitter | 3.7"L x 1.3"W x 0.5"H , 40g |
| Receiver | 4"L x 2.4"W x 1"H |
The motion picture industry's first affordable yet professional wireless HD system. Uncompressed 4:2:2 1920x1080 10-bit video. Less than 1ms latency. Supports multiple framerates and resolutions. Operates on 5v power (Transmitter requires 1A, Receiver 2.1A). Range of over 300ft (91m) line-of-sight. 256-bit encryption of transmitted signals. FCC, CE, and ROHS certified. HDMI video input/output. Transmitter weighs less than 40 grams. Plug & Play--no set-up required., In the box:, 1 Paralinx Arrow transmitter,
1 Paralinx Arrow receiver 1 Paralinx USB Regulator [PTap] 1 ...ReadyMadeRC
PARALINX TOMAHAWK - HD TRANSMITTER AND RECEIVER SET
| Dimensions (Tx) | 4" x 2.5" x 0.8" (not including antennas) |
| Dimensions (Tx) | 108mm x 67mm x 21mm |
| Weight (Tx) | 6.3oz / 178g (without antennas) |
| Dimensions (Rx) | 5" x 5.6" x 1.3" (not including antennas) |
| Dimensions (Rx) | 143mm x 128mm x 33mm |
| Weight (Rx) | 12oz / 340g (without antennas) |
Much like the popular Paralinx Arrow and Arrow Plus, the Tomahawk transmits Full HD video (up to 1080p/60 4:2:2) with less than 1 millisecond delay and is capable of handling up to 4 simultaneous receivers. The transmitter weighs approximately 6.3oz/178g (without antennas) and the receiver weighs 12 oz/340g (without antennas)., Tomahawk Features:, , In the box:, 1 Tomahawk transmitter w/stock antennas, NOTE: Power Cable for the Tomahawk transmitter must be purchased separately. PTap to 2-pin Lemo-type, 2-pin Lemo-type to 2-pin Lemo-type, and JST-RCY to 2-pin Lemo-type options are available.,
The Paralinx TOMAHAWK is a revolutionary HD Video Transmitter system ...ReadyMadeRC
3DR MINIMOSD REV. 1.1
| Dimensions | 0.7"W x 1.7"L (2.4" w/ pins as shown) x 0.3"H |
It features two independent power and ground sections to isolate the OSD's analog stage: a +5V section for the ATmega and the OSD's digital stage, powered through the FTDI cable or other +5V source; and a regulated +5V section for the OSD's analog stage, powered through the video in/out header and capable of handling up to +12V input. Solder jumpers are available to combine the two power and ground sections if desired.,
It's tailored for use with ArduPilot Mega and the MAVlink ...ReadyMadeRC
ZEISS CINEMIZER HD GLASSES + DJI LIGHTBRIDGE 2.4 HD VIDEO COMBO
| DC power input | 11-26V |
| Power consumption | 6W (without external USB equipment) Power consumption |
| DC power input | 11-26V |
| Power consumption | 8W (during normal use) |
| Ground unit | 125mm x 89mm x 20mm, |
| Air Unit | 67mm x 47mm x 20mm |
| Ground unit | 360g, |
| Air unit | 70g |
| 24 Bit RGB color depth- FoV (Field of View) | 30° |
| HDMI | 720p, 1080p and 3D (Frame Packing) |
| AV-In | 3,5mm / 4pin jack for audio & video (PAL/NTSC) |
| Battery-Box | 60 g, HDMI-Adapter 30 g |
Features:, 2.4G Full HD Digital Video Downlink, -Support for two remote controls: one for flight control (10 Channels) and the other for gimbal control(6 Channels). Control signals are received in the air and then transmitted to the flight controller through D-BUS., Specifications:, , It's Time to Upgrade:, It's time to move up to the most advanced and highest quality video glasses available for FPV! With features not seen in other popular FPV goggles such as diopter adjustment (for individuals that wear glasses), ear slider for comfort, and high resolution OLED displays, these are sure to be the new favorite for FPV'ers everywhere!, Display adjustments including:, , Aspect ratio 16:9,
Zeiss and DJI have joined forces to give you the ...ReadyMadeRC
FR SKY - TARANIS X9D PLUS TRANSMITTER, MODE 2 WITHOUT BOX/CASE
Model:, , Operating Temperature Range:, , Operating System:, , Transmitting Frequency:, , System:, , Power Supply:, , Current Drain:, , Operating Humidity:, , Includes:,
The same radio, minus the case with a discounted price! ...ReadyMadeRC
FRSKY TARANIS X9D PLUS (BOXED) MODE 2 PICK YOUR RECEIVER COMBO
Model:, , Operating Temperature Range:, , Operating System:, , Transmitting Frequency:, , System:, , Power Supply:, , Current Drain:, , Operating Humidity:, , Includes:,
The new Taranis X9D Plus now has vibration alerts and ...ReadyMadeRC
FRSKY TARANIS X9D PLUS (AL CASE) MODE 2 PICK YOUR RECEIVER COMBO
Model:, , Operating Temperature Range:, , Operating System:, , Transmitting Frequency:, , System:, , Power Supply:, , Current Drain:, , Operating Humidity:, , Includes:,
The new Taranis X9D Plus now has vibration alerts and ...ReadyMadeRC
DJI E600 TUNED PROPULSION SYSTEM FOR QUADCOPTERS
E300/E600 specifications:, , PROPELLER:, 20% ~ 25% efficient, carefully balanced., 2212 / 3508 MOTOR:, Our new self-tightening mechanism dramatically reduces any chance of loosening rotor or mistakenly installed rotors., 15A/20AESC:, Improved ESC along with new highly efficient and quick response algorithms, providingextra maneuverability and stability in wind and during descending.By using coaxial-cable, which provide a calm electromagnetic environment for the airborne sensors., Accessories pack now available within the package:, What’s inside? Power Hub, Compatibility VS Size of Craft:,
E300/E600 The E series tuned propulsion system is the first ...ReadyMadeRC
DJI E600 TUNED PROPULSION SYSTEM FOR HEXACOPTERS
E300/E600 specifications:, , PROPELLER:, 20% ~ 25% efficient, carefully balanced., 2212 / 3508 MOTOR:, Our new self-tightening mechanism dramatically reduces any chance of loosening rotor or mistakenly installed rotors., 15A/20AESC:, Improved ESC along with new highly efficient and quick response algorithms, providingextra maneuverability and stability in wind and during descending.By using coaxial-cable, which provide a calm electromagnetic environment for the airborne sensors., Accessories pack now available within the package:, What’s inside? Power Hub, Compatibility VS Size of Craft:,
E300/E600 The E series tuned propulsion system is the first ...ReadyMadeRC
GOPRO DUAL BATTERY CHARGER (FOR HERO3+/HERO3)
| Compatibility | HERO3+, HERO3 |
Conveniently charge two GoPro Li-ion batteries simultaneously with the Dual Battery Charger. Featuring USB compatibility, you can power it with most standard USB chargers, the GoPro Wall or Auto Charger or a computer. Dual LED indicator lights display the charging status of both batteries: in process (amber) and fully charged (green)., Warning:, Do not use the battery if it has been damaged. Follow all warnings and instructions in the camera User Manual., Restrictions:, Sales of the GoPro equipment from my store are restricted to the United States only.,
Charges two GoPro Li-ion camera batteries at once. Conveniently charge ...