SDSHobby
7IN WIRELESS LCD MONITOR FOR FPV AERIAL PHOTOGRAPHY/ BUILT-IN DVR AND 5.8GHZ WIRELESS RECEIVER
| Resolution | 1024 x 600 Pixels |
| Brightness | 250cd/sq.m |
| Contrast | 700 |
| Response Time | 10ms |
| Backlight | LED |
| Color System | PAL-4.43; NTSC-3.58 |
| Viewing Angle | 75/75 degree (L/R), 75/ 75 degree (U/D) |
| Input Singnal | VideoAudio RF HDMI (optional) |
| HDMI Support Mode | 480i480p576i576p720p1080i1080p (50/60Hz) |
| Output Signal | VIDEO |
| Earphone Output | 3.5mm Audio output |
| Input Voltage | DC 6~24V |
| Power Consumption | ≤8W |
| Installation | Include a standard 1/4-20 tripod mounting hole on the bottom for simple use in your ground station |
| Working Temperature | -20~50 centigrade |
| Storage Temperature | -30~65 centigrade |
| Dimensions | 189W*134H*32D mm |
| Weight | 450g |
| Photo Function | It Can Take, Review & Store Pictures. |
| Seamless Continuous Recording | No Intermittent Recording, it will not Miss any Detail and Wonderfulness. |
| Resolution | D1 (720x576), VGA (640x480), QVGA (320x240), Higher Resolution, Bigger File. |
| Motion Detection Available | Record only when there is movement. |
| Motion detection sensitivity | It is adjustable according to the situation. |
| Day Label | Optional to show the day label when video recording. |
Specifications:, Aspect Ratio: 16:9, Features:, This is the ideal choice for security & protection, evidence & investigation, like police, household, sports, automotive industry, shops, etc.. At the same time, with its stylish and high-end appearance, it also becomes the fashion choice of leisure goods., Overwrite: It supports loop recording, which can automatically overwrite when storage is full; TF card life is longer than normal DVR with unique algorithm., Package Details:, Power Adapter x1,
Power off Without Video Lost. Voice record is optional when ...SDSHobby
MULTI-FUNCTION 7 ROUTES STEPPING REMOTE/ ELECRTIC CONTROL/ MULTIAXIS NIGHT-FLIGHT LIGHT SWITCH RCD3003
Features:, 1 Servo signal input, control up to 7 devices, Applications:, RC model rocket launch, Typical Application:, , A: Connect the channel of receiver (usually connect channel 5), B: Figure dial switch to set working mode. If it is at “0” when power it on, you need to calibrate again., C: Centre driver board of RCD3003, including microprocessor and driver module of electric switch power., D: 7 green LED, separately indicate the working status of 7 electric switches., E: One red LED to show external power supply., F: Power output of 7 electric switches., G: External power supply to provide power for the controlled 7 electric switches.,
5-16V AUX Power input, total max 3.5A output 7 outputs, ...SDSHobby
REMOTE CONTROLLED TWO-CYLINDER NITRO ENGINE GLOW PLUG DRIVER RCD3004 (BUZZER VERSION)
Features:, Supply power for two-cylinder engine simultaneously, Application:, Start and stabilizing for two-cylinder engine, Function Description:, , Typical Application:, , A: Receiver B: RCD3004, C: External connection to the outside buzzer, D: Black line for connecting engine housing, red line for two glow plugs, E: Receiver battery pack 3.2~8.4V,
Independent power supply, working voltage 3.2V-8.4V Red and blue LED ...SDSHobby
REMOTE CONTROLLED GLOW PLUG ENGINE AUTO BOOSTER/ SWITCH RCD3002 (BUZZER VERSION)
| Working voltage | 4.5V-8.4V |
Features:, Powered by receiver directly, Application:, All kinds of engines with glow plug, Function Description:, RCD3002 is a kind of,
Red and blue LED lights indicates the present working status ...SDSHobby
5.8G 1000MW 8 CHANNELS WIRELESS AV TRANSMITTER FOR FPV AERIAL PHOTOGRAPHY WITH TRANSFER LINE/ ANTENNA TX51W
| Transmitting Frequency | 5645-5945MHz, 8channels |
| Output Power | 28-30 dBm |
| Output Impedance | 50 Ohm |
| Operating Voltage | 7-15V |
| Supply current | 500mA |
| Operating Temperature | -10~+85 centigrade |
| Video Band Width | 8.0 MHz (Max) |
| Audio carrier Frequency | 6.5 MHz |
| Video Input Level | 0.8~1.2Vp-p |
| Video Input Impedance | 75 Ohm |
| Audio Input Level | 0.5~2.0Vp-p |
| Audio Input Impedance | 10 Kohm |
| Antenna Connector | SMA Connector |
| Size | 59*27*33 mm (L*W*H) |
Specifications:, Features:, 5.8GHz AV synchronized transmission (compatible for PAL and NTSC), Product Description:, This product is 5.8G 1000mW 8 Channels Wireless AV Transmitter., Kindly Remark:, 1., Package Details:, 1 x 5.8G 1000mW FPV 8 Channels Wireless AV Transmitter,
Compact structure, small size and large transmitting power (1000mW) Integrated ...SDSHobby
DLA58 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 58CC FOR GASOLINE AIRPLANES WITH WALBRO CARBURETOR AND NSK BEARING
| Power | 6.0HP/8500rpm |
| Idle Speed | 1300 rpm/min |
| Pulling Force | 15Kg / 100 meters Altitude (14.2kg for DLE55) |
| Recommended Propeller | 22x8, 22x10, 23x8, 23x10 |
| Sparking Plug | DLA CM6 |
| Carburetor | Walbro (made in Japan) |
| Exhaust Amount | 58cc |
| Diameter*Stroke | 46mm*35mm |
| Ratio of Compression | 7.8 |
| Weight | Main Engine-1310g, Exhaust Pipe-110g, Ignition-135g |
| Material of Muffler and crankcase | Aluminum Magnesium Alloy (Aluminum Alloy for DLE55) |
| Machining | CNC processed, while others are not. |
| Crank Case Material | the newest aero material makes DLA58 engines too hard to be damaged. |
Parameters & Performance:, Ratio of Lubricating Capacity: 30:1--40:1 (Trial Run), 40: 1--50:1(Normal Flying), Included Spare Parts:, 1 x DLA 58CC Engine, Features:,
13.5Kg / 1800 meters Altitude (12.5kg for DLE55) 1 x ...SDSHobby
6-12V REMOTE CDI IGNITION CUT OFF/KILL SWITCH RCD3027 FOR GASOLINE ENGINE
| A. Power input | connect to the battery |
| B Power output | connect to eletric equipment |
| C Signal input | conncet to the receiver |
| D Indicator light | show the working state |
Features:, Input voltage:, 6-12V, Input current (max): 6A, Application:, Function:,
Optocoupler signal input Noise/signal lost interference filtering Low power consumption ...SDSHobby
220V MULTIFUNCTIONAL BALANCE CHARGER/ DISCHARGER Q6AC WITH BUILT-IN ADAPTOR AND OUTPUT 1A / 20W (EURO STANDARD)
| Input Voltage Range | DC11.0-18.0V;AC 220V |
| Charging Current Range | 0.1-5.0A |
| Discharging Current Range | 0.1-1.0A |
| Max. Input/Charging Power | 200W |
| Max. Discharging Power | 20W |
| Balance Currentr | ≤250mA |
| Balance Tolerance | ±0.01V |
| Ni-Cd / Ni-MH Battery | 1-15S |
| Lithium Battery Type | Lithium/ Lithium-ion/ Li-Fe Battery |
| Lithium-ion Battery | 1-6S |
| Pb Battery Voltage | 2-20V |
| Weight | 1080g |
| Dimension | 228 * 171 * 65mm |
n:, , Features:, Intelligent operating and the charging can be accurate to 0.01V., Accessories Included:,
Specificatio Built-in balance charging/ discharging circuit Support charging/ discharging for ...SDSHobby
APM 2.5.2 ARDUPILOT MEGA 2.5 MULTICOPTER FLIGHT CONTROL BOARD
| https | //code.google.com/p/ardupilot-mega/ |
| https | //code.google.com/p/arducopter/ |
More about ArduCopter Wiki:, , RC Airplane:, RC Multicopter:, Description:, This new presentation of the ArduPilot 2.5 system which Power Module with intergraded 5.3V regulator and current and voltage sensing (XT-60 Plugs only), Features:, -Support ArduPlane, Multicopter, ArduCopter, helicopter, ArduRover,
The ArduPilot Mega 2.5 is a complete open source autopilot ...SDSHobby
HIEE 5.8G 300MW 32CH FPV TRANSMITTER TS3203 WITH ANTENNA
| Transmission Distance | 800 meters in open area |
| Transmitter Power | 300mW |
| Input Power | 3S-7S |
| Antenna Connection | RP-SMA Jack in transmitter unit, RP-SMA Plus in antenna |
| Antenna Gain | 3DBI |
| Working Current | 210mA/12V |
| Working Temperature | -10 Celsius degree ~ 85 Celsius degree |
| Net Weight | 18.5g (without shell); 29g (with shell) |
| Size | 64*35*27MM (with shell) |
Specification:, l, Compared with other brand transmitter, HIEE transmitter has following unique features:, 1. 3S-7S wide voltage range, compatible with 2S-7S Lipo battery and directly get power from 6S Lipo battery, Features:, 1. 32 channels, compatible with fat shark, DJI, Boscam.,
l l l l l l l l . With ...SDSHobby
HIEE 5.8G 500MW 32CH FPV TRANSMITTER TS3205 WITH ANTENNA
| Transmission Distance | 1500 meters in open area |
| Transmitter Power | 500mW |
| Input Power | 3S-7S |
| Antenna Connection | RP-SMA Jack in transmitter unit, RP-SMA Plus in antenna |
| Antenna Gain | 3DBI |
| Working Current | 250mA/12V |
| Working Temperature | -10 Celsius degree ~ 85 Celsius degree |
| Net Weight | 21g (without shell); 31g (with shell) |
| Size | 64*35*27MM (with shell) |
Specification:, l, Compared with other brand transmitter, HIEE transmitter has following unique features:, 1. 3S-7S wide voltage range, compatible with 2S-7S Lipo battery and directly get power from 6S Lipo battery, Features:, 1. 32 channels, compatible with fat shark, DJI, Boscam.,
l l l l l l l l . With ...SDSHobby
HIEE 5.8G 800MW 32CH FPV TRANSMITTER TS3208 WITH ANTENNA
| Transmission Distance | 2000 meters in open area |
| Transmitter Power | 800mW |
| Input Power | 3S-7S |
| Antenna Connection | RP-SMA Jack in transmitter unit, RP-SMA Plus in antenna |
| Antenna Gain | 3DBI |
| Working Current | 550mA/12V |
| Working Temperature | -10 Celsius degree ~ 85 Celsius degree |
| Net Weight | 36g (without shell); 46g (with shell) |
| Size | 64*35*27MM (with shell) |
Specification:, l, Compared with other brand transmitter, HIEE transmitter has following unique features:, 1. 3S-7S wide voltage range, compatible with 2S-7S Lipo battery and directly get power from 6S Lipo battery, Features:, 1. 32 channels, compatible with fat shark, DJI, Boscam., Kindly Remark:, This transmitter now is,
l l l l l l l l . With ...SDSHobby
BURST FLASH LED LIGHT CONTROL BOARD FOR QUADCOPTER/ HEXRCOPTER/ OCTOCOPTER/ MULITICOPTER
| Large power output | maximum |
| For Quadcopter | control board* 1 + connecting line* 4 + LED lights* 4 |
| For Hexrcopter | control board* 1 + connecting line* 6 + LED lights* 6 |
| For Octocopter | control board* 1 + connecting line* 8 + LED lights* 8 |
Product Description:, Recommended Other Relevant Products:, special 60cm light connecting line, Recommended Set for Multicopter:,
Super highlight burst flash light set which is special designed ...SDSHobby
9IN FPV PIP 2CH QUAD LCD MONITOR/ DISPLAYER BUILT-IN DUAL 5.8GHZ 32CH RECEIVER
| Screen type | TFT LCD Screen/ long life, LED backlight |
| Resolution | 800*480 |
| Brightness | 450cd/square meter |
| Contrast | 500 |
| View Angle | 140/120degree (Horizontal/ Vertical) |
| Working Voltage | DV 12V (center positive) or 11.1V Li-battery |
| Power Consumption | < 8w |
| Size | 180mm x 120mm x 23mm |
| Antenna Connection | SMA |
| Working temperature | -10 centigrade ~ + 65 centigrade |
Specifications:, Features:, Package Details:,
Built-in 5.8 GHz Dual receiver and with Dual split display ...SDSHobby
NEW MINI SERVO DISTRIBUTION BOARD/ SECTION BOARD (4106#) WITH LED SCREEN/ VOLTAGE ALARM/ BEC-BLACK COLOR
| (Max | 30A), providing ample work for the servo currents. |
| Input Voltage | 6-13V |
| Output Voltage | 4.8-9 .7 V (factory voltage is 5.2V) |
| Output Current | 0-20A (Max |
| Weight | 80g |
| Size | 122mm*72mm*18mm |
| Working Temperature | -20 to 85 Celsius degree |
NEW Features for Servo Distribution Board:, 1. with LED Screen, Features:, l, You can freely set the alarm input battery voltage, CDI-powered battery alarm voltage value (alarm value range: 4-12V, use the tips alarm buzzer and LED), Technology Parameters:, l,
. Voltage Alarm 3. Flight Time Calculation Dual power inputs ...