HiModel
TOWERPRO SG-90 MICRO SERVO GEAR SET
Features:, , Includes/Requires:,
Spare Gears for Tower Pro SG-90 ServosHiModel
TOWERPRO 13KG HIGH TORQUE METAL GEAR SERVO
| Dimension | 40.6mm*19.8mm*37.8mm |
| Weight | 55.2G |
| Operating speed | 0.24sec/60degree(6.0V) |
| Stall torque | 13.0kg/cm (6.0V) |
| Temperature Range | -20℃~60℃ |
| Dead band width | 4ms |
| Operating Voltage | 4.8V~7.2V |
| connector wire length | 32cm |
| Structure Feature | 3 pole ferrite, dual ball bearing, 3 metal ears and 1 Resin metal gear |
, , , , , , Specifications:, , , , , , , , , , , , ,
1 Reviews
SDSHobby
TOWERPRO ANALOG MICRO SERVO SG50 0.6KG/5G W/ PLASTIC GEARS FOR REMOTE CONTROL HELICOPTERS
| Stall Torque | 0.6kg/cm at 4.8V |
| No Load Running Speed | 0.3sec/60° at 4.8V |
| Size (L*W*H) | 21.5*11.7*25.1mm |
| Gear/ Case Type | plastic/ plastic |
| Servo Cable Length | 140mm |
| Operating Voltage | 4.2-6V |
| Standard Servo Arms | three |
| Installation Screws | one bag |
| Digital Servo | 1pcs |
Specifications:, Weight: 5g, Interface Type:, compatible with JR & Futaba interface, Storage Temperature: 0, Dead band width:≤, Application Fields:, remote control helicopters, Included Parts:,
℃ -55 ℃ 10usSDSHobby
TOWERPRO HEAVY DUTY ANALOG SERVO MG945 12KG/55G W/ METAL GEARS FOR RC CARS, RC BOATS AND ROBOT
| Stall Torque | 12kg/cm at 4.8V |
| No Load Running Speed | 0.25sec/60° at 4.8V |
| Size (L*W*H) | 40.7*19.7*42.9mm |
| Weight | 55g |
| Gear/ Case Type | metal/ plastic |
| Servo Cable Length | 300mm |
| Operating Voltage | 4.8-7.2V |
| Application Fields | 50-90 Class Nitro Airplanes, 26-50cc Gasoline Airplanes and others, |
| Standard Servo Arms | two |
| Installation Screws | one bag |
| Digital Servo | 1pcs |
Specifications:, Bearing Qty.: 2, Interface Type:, compatible with JR & Futaba interface, Storage Temperature: 0, Dead band width:≤, Included Parts:, Kindly Remark:, The following information and pictures will help you to distinguish the Tower pro,
℃ -55 ℃ 10us RC Cars, RC Boats and Robot. ...SDSHobby
TOWERPRO SERVO SG5010 4.5KG/39G WITH 25T FUTABA NYLON GEARS AND DUAL BALL BEARINGS
| Stall Torque | 3.1kg/cm at 4.8V, 4.5kg/cm at 6.0V |
| No Load Running Speed | 0.17sec/60° at 4.8V, 0.14sec/60°at 6.0V |
| Size (L*W*H) | 40.2 *20.2*43.2mm |
| Weight | 39g/ 1.44oz (Servo Net Weight Only) |
| Gear/ Case Type | nylon/ plastic |
| Output shaft gear qty | 25TFUTABA |
| Operating Voltage | 4.8-6V |
| Servo Cable Length | 300mm |
| Standard Servo Arms | four |
| Installation Screws | one bag |
| Digital Servo | 1pcs |
Specifications:, Bearing Qty.: 2, Interface Type:, compatible with JR & Futaba interface, Storage Temperature: 0, Dead band width:≤, Included Parts:,
℃ - 55 ℃ 0usSDSHobby
TOWERPRO MG995 11KG/55.2G ANALOG SERVO HIGH SPEED W/METAL GEARS, 5T FUTABA FOR ROBOT AND RC CARS
| Stall Torque | 11kg/cm at 6.0V |
| No Load Running Speed | 0.17sec/60° at 4.8V, 0.13sec/60°at 6.0V |
| Size (L*W*H) | 40.6mm*19.8mm*37.8mm |
| Weight | 55.2g |
| Gear/ Case Type | metal/ plastic |
| Output shaft gear qty | 25T FUTABA |
| Storage Temperature | -20 |
| Operating Voltage | 4.8-6V |
| Servo Cable Length | 300mm |
| Standard Servo Arms | two |
| Installation Screws | one bag |
| Digital Servo | 1pcs |
Specifications:, Bearing Qty.: 2, Interface Type:, compatible with JR & Futaba interface, Dead band width:≤, Application Fields:, Robot and Remote Control Cars, Included Parts:, Kindly Remark:, The following information and pictures will help you to distinguish the Tower pro,
℃ -60 ℃ 4us , 50-90 Class Nitro Airplanes and ...SDSHobby
TOWERPRO ANALOG SERVO SG90 1.5KG/9G W/ PLASTIC GEARS FOR REMOTE CONTROL HELICOPTERS AND BOATS
| Stall Torque | 1.5kg/cm at 4.8V |
| No Load Running Speed | 0.3sec/60° at 4.8V |
| Size (L*W*H) | 23*12.2*29mm |
| Gear/ Case Type | plastic/ plastic |
| Operating Voltage | 4.2-6V |
| Rotary Angle | 180 |
| Servo Cable Length | 250mm |
| Application Fields | remote control helicopters, micro robot, robot arm and boats |
| Standard Servo Arms | three |
| Installation Screws | one bag |
| Digital Servo | 1pcs |
Specifications:, Weight: 9g, Bearing Qty.: 2, Interface Type:, compatible with JR & Futaba interface, Storage Temperature: 0, Dead band width:≤, Included Parts:,
℃ - 55 ℃ 10us °HobbyKing
LIGHT AIRCRAFT 182 W/ ESC, MOTOR AND SERVOS PLUG-AND-FLY DELUXE VERSION
| Weight | 600g w/ battery |
| ESC | 25A brushless |
: 780mm / 30.7in, : 980mm / 38.6in, Prop:, 8x6 (Spare Included), Motor:, Brushless Bell motor, similar to the towerpro 2908-21 (1530kv), Battery:, 11.1v 1300mAh 3S1P (Not included), Battery Compartment:, 110 x 34 x 32mm (MAX), Servos:, 9g x 4 (Quality servos, with precise control.),
182 18A Brushless Deluxe Version This kit will take you ...5 Reviews
SDSHobby
L SHAPED SERVO PROTECTOR/HOLDER/ ROBOT HOLDER MG013-5PCS/BAG
| Material | 2mm hard aluminum board |
| Surface Treatment | sand blasted and anodized |
| Dimension | 35x30mm |
| Weight | 10g |
| This holder is processed by CNC machine, error for hole site | ±0.1mm, angle error |
Specifications:, Application: suitable for Korean servo HS322、HS422, Towerpro MG995 , MG996、SG5010 servos, supporting Hitec、Parallax、Futaba、Towerpro servos with 35*30mm size., Kindly Remark:,
SDSHobby
L SHAPED SERVO PROTECTOR/HOLDER/ ROBOT HOLDER MG013
| Material | 2mm hard aluminum board |
| Surface Treatment | sand blasted and anodized |
| Dimension | 35x30mm |
| Weight | 10g |
| This holder is processed by CNC machine, error for hole site | ±0.1mm, angle error |
Specifications:, Application: suitable for Korean servo HS322、HS422, Towerpro MG995 , MG996、SG5010 servos, supporting Hitec、Parallax、Futaba、Towerpro servos with 35*30mm size., *Attention:, Servo, Kindly Remark:,
NOT IncludedSDSHobby
SUPER ROBOT GRIPPER FOR AURDUINO ROBOT/2-FREE DEGREE GRIPPER OF MECHANICAL ARM (WITHOUT SERVO)
Product Description:, The mechanical arm is, Kindly Remark:, This product does not contain servos. And it delivers by commecial parts, users need to install by yourself., http://www.sdshobby.com/towerpro-mg995-11kg552g-analog-servo-high-speed-wmetal-gears-5t-futaba-for-rc-hobby-and-robot-p-967.html,
parallel holding things, easy to catch the object. The clawface ...HobbyKing
HXT 8MM ALLOY MOTOR MOUNT 2.5G
,
Motor mount. To suit motors with shaft size of 8mm. ...5 Reviews
HobbyKing
HEXTRONIK 24GRAM BRUSHLESS OUTRUNNER 3000KV
towerpro engine mount ..." />
| Load [no prop] | 1.2a / 7.4v @ 21500rpm (0g thrust) |
| Load [7x4 prop] | 21A / 7.4v @ 8800rpm (380g thrust) |
| Load [8x3.8 prop] | 22A / 7.4v @ 8200rpm (430g thrust) |
| https | //www.hobbyking.com/hobbyking/store/comersus_viewItem.asp?idProduct=3613 |
5 Reviews
HobbyKing
HXT 2730 ACCESSORY KIT (MOUNT/PROP SAVER)
,
Motor mount. To suit motors with shaft size of 8mm. ...5 Reviews
HobbyKing
FF SUPER CHIPMUNK ELECTRIC ARF
| Material | Fibreglass & balsar. |
| Wingspan | 998mm |
| Length | 810mm |
| Wing Area | 16dm sq. |
| Height | 210mm |
| Airfoil | NACA2416 |
| Flying Weight | 820g |
| Suggested prop | 7060 or larger |
5 Reviews