ngHobbies
600MW 5.8GHZ IMMERSIONRC TRANSMITTER
Operating Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
Weight | 20 grams |
Size | 57 x 34mm |
Input voltage range | 6 - 16 v |
Parameters:, 600mW output power, Content of the package:, 1 x 600mW Transmitter module, Note:, The use and operation of this product in Canada and United States will require a HAM or Amateur radio license. Please check with your local authorities before purchasing this product.,
The Immersion RC's 5.8Ghz 600mW transmitter is a state of ...HobbyKing
ORANGERX R615 SPEKTRUM/JR DSM2 COMPATIBLE 6CH 2.4GHZ RECEIVER
• Input voltage | 3.7~9.6V |
Input voltage | 3.7~9.6V |
Features:, • Super light weight 3.7g / 9.8 grams with case, Specification:, Channels:6, Size:, 19.5x30x10mm, 43x22x13mm with case, Weight:, 3.7g / 9.8g with case, Warranty:, 12 Month replacement guarantee!, Included:, OrangeRx R615 DSM2 Compatible receiver, NOTE:, 1) This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver.,
Compatible with all Spektrum/JR DSM2 Air transmitters. The OrangeRx R615 ...5 Reviews
HobbyKing
ORANGERX R620 SPEKTRUM/JR DSM2 COMPATIBLE FULL RANGE 6CH 2.4GHZ RECEIVER W/FAILSAFE
• Input voltage | 3.7~7.0V. |
• Failsafe | All channels to bind position at signal loss. |
Input voltage | 3.7~7.0V |
Weight | 10.2g with case |
Features:, • Super light weight at just 10.2 grams with case., Specification:, Channels:6, Size:, 46x23x13mm with case, Warranty:, 12 Month replacement guarantee!, Includes:, OrangeRx R620 DSM2 Compatible receiver, NOTE:, 1) Accepted by the MAAA in Australia, see the MAAA MOP58 for guidance,
OrangeRx R620 full range receiver w/failsafe, S.BUS and satellite port ...5 Reviews
HobbyKing
TURNIGY GT-10X 1/10 PAN CAR W/CARBON FIBER CHASSIS (KIT)
Length | 420mm |
Width | 200mm |
Height | 115mm |
Tread | 170mm |
Wheel base | 260mm |
Battery tray size | 96x50mm |
Features:, • Lightweight slim-line design, Specs:, Chassis weight:, 515g (w/no electronics), Includes:, GT-10X pan car chassis, Requires:, 2CH transmitter and receiver,
The all new Turnigy GT-10X 1/10 Pan Car Kit is ...5 Reviews
HobbyKing
1930'S VINTAGE MONOPLANE RACER BALSA AND LITE PLY 1355MM (ARF)
Wing Span | 1355mm |
Length | 1108mm |
Wing Area | 29.65Sqdm |
Flying Weight | 1900g |
Spec:, Requires:, 4 channel radio system,
The Golden era of aviation - The grand finale at ...HobbyKing
I-RACER ANDROID R/C CAR (BLUETOOTH CONTROL)
Supply Voltage | 5~6V DC |
Communication Range | 10 meters |
Battery Run Time | Aproximately 120min |
Includes | I-Racer Android Car |
Features:, • Android Compatibility, Specs:,
The I-Racer Android Car is a high-tech RC car that ...5 Reviews
HobbyKing
ROBIRD G31 3-AXIS PRECISION FLYBARLESS SYSTEM
Weight | 11g |
Dimensions | 34 x 25 x 13.7mm |
Includes | SRX Cables x 1 |
http | //www.robird.net/G31/ |
Features:, • HV Compatible (5V/6V/7.2V/8.4V), Specs:, *Note:, Robird G31 software can be downloaded for free at,
New price, now only $74.99!!! Taking 3 years of continuous ...5 Reviews
HobbyKing
HOBBYKING AIROSO F3A ELECTRIC AEROBATIC PATTERN SHIP 1576MM (ARF)
Wing Span | 1576mm |
Wing Area | 40.05 Sqdm |
Length | 1529mm |
Weight | 2300g RTF |
Radio | 4 channels, 4 servos |
Motor | 4030/10 |
ESC | 60A-80A |
Battery | 6S 3800mAh-5000mAh |
Propeller | APC 16x12E or 17x8E |
Specs:, Requires:,
This our newest Electric F3A model designed specifically for F3A ...5 Reviews
ReadyMadeRC
FY-901 MULTI-ROTOR FLIGHT STABILIZATION CONTROLLER
mail us | service |
The FY-901 for multi-rotor copter can be used in the following models:, , :, , The FY-901 has been tested to work well with the following RC system:, , The FY-901Operating Mode for multi-rotor copter supports two flight modes :, , 1: Auto-Stabilization mode., : 3D Control Mode., Gyroscope initialization (re-setting):, , Out of the box, the FY-901 has been fully initialized. However, if the following condition occurs, resetting the gyro is recommended:, , NOTE:,
Introduction FY-901 has integrated three-axis gyro and three-axis accelerometer, which ...ReadyMadeRC
FY-DOS INERTIAL ATTITUDE STABILIZER WITH GPS
INCLUDES:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver. Feiyu GPS receivers made for other models, and most other GPS receivers, use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, , For more detail:, FY-DoS for multi-rotors control manual,
DoS is an aeromodelling balancing instrument designed for a variety ...ReadyMadeRC
FY-DOS INERTIAL ATTITUDE STABILIZER
Included in this version:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver. Feiyu GPS receivers made for other models, and most other GPS receivers, use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, ●, For more detail:, FY-DoS for multi-rotors control manual,
DoS is an aeromodelling balancing instrument designed for a variety ...HobbyWireless
GUARDIANTM 2D/3D INERTIAL STABILIZER
Details:, , Q: Why do I need the Guardian?, The Guardian helps both beginner and expert pilots fly with confidence, and provides two key modes of operation:, , The Guardian has two submodes for 3D flying:, In 3D Heading Lock submode, simply center your sticks to have the Guardian lock onto your present attitude (pitch, roll, and heading), which can make it easier to perform stunts like prop hanging, inverted flight, knife edges, low speed harriers, etc!, Q: I Fly FPV. Is the Guardian for me?, Q: Will the Guardian work with my model?, Q: How do I install the Guardian?, Q: How do I configure the Guardian?, Q: How does the Guardian work?, Q: What sets the Guardian apart from other Stabilization systems out there?, Q: I want one for each of my models! When and where can I buy it??, Q: Where can I find more details?, Here is a video tutorial of Guardian installation and configuration:,
Master your Skies! Based on Eagle Tree's proven inertial stabilization ...HobbyWireless
ELOGGER V4 WITH WIRE LEADS, 80 VOLTS, 150 AMPS (MPRV4-LEADS-150)
Web Site | http |
BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, , Here are the key features of the eLogger V4:, , E-mail:, sales@eagletreesystems.com,
Logs pack current to +/- 100 amps (150 amps with ...HobbyWireless
ELOGGER V4 WITH WIRE LEADS 80 VOLTS, 100 AMPS (MPRV4-LEADS-100)
Web Site | http |
BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, , Here are the key features of the eLogger V4:, , E-mail:, sales@eagletreesystems.com,
Logs pack current to +/- 100 amps (150 amps with ...HobbyWireless
ELOGGER V4 WITH INTEGRATED CONNECTORS, 80 VOLTS, 100 AMPS (MPRV4-CONN-100)
Web Site | http |
BELLEVUE, WA 98006 Phone | 425-614-0450 |
Details:, , Here are the key features of the eLogger V4:, , E-mail:, sales@eagletreesystems.com,
Logs pack current to +/- 100 amps (150 amps with ...