HobbyKing
TURNIGY AERODRIVE SK3 - 2836-2500KV BRUSHLESS OUTRUNNER MOTOR
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today. The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time. The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise. Specs.Turns: 6TVoltage: 2~3S LipolyRPM/V: 2500kvInternal resistance: 0.02 OhmMax Loading: 35AMax Power: 405WShaft Dia: 3.175mmBolt holes: 16mm & 19mmBolt thread: M3Weight: 80gMotor Plug: 3.5mm Bullet Connector,
5 Reviews
HobbyKing
TURNIGY AERODRIVE SK3 - 2826-1240KV BRUSHLESS OUTRUNNER MOTOR
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today. The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time. The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise. Specs.Turns: 22TVoltage: 2~3S LipolyRPM/V: 1240kvInternal resistance: 0.095 OhmMax Loading: 16AMax Power: 150WShaft Dia: 3.0mmBolt holes: 16mm & 19mmBolt thread: M3Weight: 45gMotor Plug: 3.5mm Bullet Connector,
5 Reviews
HobbyKing
SCORPION SII-3014-830KV BRUSHLESS OUTRUNNER MOTOR
| Stator Diameter | 30 mm(1.18 in) |
| Stator Thickness | 14 mm(0.55 in) |
| Motor Wind | 16 Turn Delta |
| Motor Wire | 9-Strand 0.25mm |
| Motor Kv | 830KV RPM/Volt |
| No-Load Current (IO/10v) | 1.06 Amps |
| Motor Resistance (RM) | 0.042 Ohms |
| Max Continuous Current | 30 Amps |
| Max Continuous Power | 550 Watts |
| Weight | 129 Grams (4.55 oz) |
| Outside Diameter | 37.50 mm (1.47 in) |
| Shaft Diameter | 4.98 mm (0.196 in) |
| Body Length | 39.75mm (1.56 in) |
| Overall Shaft Length | 68.5 mm (2.69 in) |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
All Scorpion SII-30mm motors come with a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, and a threaded shaft prop adapter., Specifications:, No. of Stator Arms:12, Magnet Poles:14, Max Lipo Cell:5s,
Scorpion Competition Series Brushless Motors are built from the best ...HobbyKing
EPS8 COMBO MOTOR/GEARBOX/ESC/PROP (1S)
| Dimensions (Motor/Gearbox) | 46mm x 20mm |
| Weight | 10.67g (Total) |
| Shaft Length | 15mm |
| Motor | Brushed |
| Prop | 6x3 |
Specs:, ESC:, 3A Brushed (No BEC, RX Supply @ 4v), Data:, 1.9A @ 4v = 56g Thrust,
The EPS8 Combo is ideal for ultra light indoor models ...5 Reviews
HobbyKing
SCORPION HK-2216-3350KV BRUSHLESS OUTRUNNER
| Stator Diameter | 22.0 mm |
| Stator Thickness | 16.0 mm |
| Motor Wind | 12 Turn Delta |
| Motor Wire | 12-Strand 0.21mm |
| Motor Kv | 3350 RPM / Volt |
| Motor Resistance (Rm) | 0.033 Ohms |
| Max Continuous Current | 35 Amps |
| Max Continuous Power | 375 Watts |
| Weight | 64 Grams |
| Outside Diameter | 27.9 mm |
| Shaft Diameter | 3.17 mm |
| Body Length | 33.3 mm |
| Overall Shaft Length | 53.7 mm |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
Specifications:, No. of Stator Arms:9, Magnet Poles:6, No-Load Current (Io):, 1.87 Amps @ 10 volts, Max Lipo Cell:3s,
Scorpion HK Series Brushless Motors are built from the best ...HobbyKing
TURNIGY ROTOMAX 100CC SIZE BRUSHLESS OUTRUNNER MOTOR
| Battery | 12 Cell / 44.4V |
| RPM | 167kv |
| Max current | 170A |
| Watts | 7992w |
| No load current | 44V/4.5A |
| Internal resistance | 0.021 ohm |
| Weight | 2074g |
| Diameter of shaft | 10mm |
| Suggested ESC | 250A 12S Compatible |
| Suggested Prop | 27x12 |
5 Reviews
HobbyKing
TURNIGY HELIDRIVE SK3 COMPETITION SERIES - 4962-560KV (700/.90 SIZE HELI)
| Turns | 10T |
| Voltage | 12S Lipoly |
| RPM/V | 560kv |
| Internal resistance | 0.017 Ohm |
| Max Loading | 95A |
| Max Power | 4100W |
| Shaft Diameter | 6mm |
| Shaft Length | 32mm |
| Screw Mounting Spacing | 25mm (M4x4) |
| Weight | 456g |
Motor Poles:10, Motor Plug:, 4mm Bullet Connector,
Turnigy SK3 Competition Series motors are the newest addition to ...5 Reviews
HobbyKing
TURNIGY DST-1200 BRUSHLESS BELL MOTOR 1200KV
| Battery | 2~3 Cell /7.4~11.1V |
| RPM | 1200kv |
| Max current | 16A |
| No load current | 11.1V/0.8A |
| Weight | 57g |
| Diameter of shaft | 3mm |
| Dimensions | 30mmx50.7mm |
5 Reviews
HobbyKing
HOBBYKING DONKEY ST380L-4200KV BRUSHLESS INRUNNER CAR MOTOR (11T)
| RPM/v | 4200kv (11T) |
| Dimensions | 27.6mm x 46mm |
| Shaft | 3mm |
| Voltage | 7.4v~11.1v |
| Weight | 142g |
| No-load current | 2.6A @ 7.4v |
| Max Current | 33A |
| Max Watts | 360W |
Specs:,
When pulling power matters and looks.. well.. just dont, then ...5 Reviews
HobbyKing
10 INCH REPLACEMENT BLADES FOR VARIABLE PITCH MOTOR ASSEMBLY
,
10 inch Replacement Blades for Variable Pitch Motor AssemblyHobbyKing
TURNIGY TRACKSTAR 10.5T SENSORED BRUSHLESS MOTOR 3250KV
| Can Size | 540 |
| Turns | 10.5 |
| RPM/v | 3250kv |
| Max voltage | 7.4~11.1V (2~3S) |
| Max Current | 26A |
| Max Watts | 290w |
| Resistance | 0.0213ohm |
| Shaft Size | 3.175mm |
| Can Diameter | 36mm |
| Can Length | 51.5mm |
| Weight | 158g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Poles:2, Sensored:, Yes (Standard 6 pin harness), No Load Current:4A,
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/8TH SENSORED BRUSHLESS MOTOR 2350KV
| Size | 4268 |
| RPM/v | 2350kv |
| Sensored | Yes |
| Max voltage | 19V (5S) |
| Max Current | 126A |
| Max Watts | 2400W |
| Resistance | 0.0062ohm |
| Shaft Size | 5mm |
| Can Diameter | 42mm |
| Can Length | 68mm |
| Weight | 364g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Poles:4,
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
14000KV BRUSHLESS MAIN MOTOR FOR MICRO HELI (SUITS MCPX, FBL100)
| RPM/V | 14000KV |
| Stator Diameter | 11mm |
| Stator Length | 4mm |
| Voltage | 3~5V |
| No Load Current | 0.65A |
| Max Watts | 20W |
| Weight | 4.5g |
Specs:, Max Current:5A,
Brushless main motor for micro heli (suites MCPX, FBL100)5 Reviews
HobbyKing
ALLOY BL MOTOR MOUNT FOR 28MM MOTOR (2PCS/SET)
| Material | Aluminum |
| Light Weight | 3.47g (0.12 oz) |
| Max. Motor Diameter | 28mm (1.10 inches) |
5 Reviews
HobbyKing
TURNIGY C580L-580 BRUSHLESS INRUNNER MOTOR 4KW
| Dimensions | 76mm x 49mm |
| Shaft Diameter | 6mm |
| No Load Current | 1.3A @ 20V |
| No Load Speed | 11740±3% rpm |
| Max Power | 4000W |
| Max Voltage | 44.4v (12s) |
| Max Amps | 100A |
Specifications:, Weight:, 410g Inc Wire & 4mm Connectors, kv:580 rpm/v,
Turnigy C580L-580 Brushless Inrunner Motor 4kw5 Reviews