HobbyKing
TURNIGY TRACKSTAR 6.5T SENSORED BRUSHLESS MOTOR 5485KV
| Can Size | 540 |
| Turns | 17.5 |
| RPM/v | 5485kv |
| Max voltage | 7.4 (2S) |
| Max Current | 60A |
| Max Watts | 445w |
| Can Diameter | 36mm |
| Can Length | 53mm |
| Shaft Size | 3.175mm |
| Weight | 176g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Sensored:, Yes (Standard 6 pin harness),
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 8.5T SENSORED BRUSHLESS MOTOR 4620KV
| Can Size | 540 |
| Turns | 8.5 |
| RPM/v | 4620kv |
| Max voltage | 7.4 (2S) |
| Max Current | 50A |
| Max Watts | 390w |
| Can Diameter | 36mm |
| Can Length | 53mm |
| Shaft Size | 3.175mm |
| Weight | 174g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Sensored:, Yes (Standard 6 pin harness),
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/10 17.0T 2400KV BRUSHLESS
| Max Voltage | 21v |
| Max current | 24amps |
| Watts | 550 |
| Resistance | 0.0442Ohms |
| Max RPM | 50000 |
| Length | 50mm |
| Diameter | 35.8mm |
| Shaft dia. | 3.175mm |
| Shaft length | 15mm |
| Weight | 168g |
Specs:, Kv:2400,
Trackstar 2400Kv (17.0 Turn) sensorless brushless inrunner to suit 1/10 ...5 Reviews
HobbyKing
MICRO 3D SINGLE AXIS THRUST VECTORING MOTOR MOUNT
| Motor to mount hole spacing | 32mm diagonal |
| Firewall hole spacing | 32mm diagonal |
| Standoff from firewall | 16.5mm |
| Weight | 3.1g |
Spec:,
Looking for something REALLY different for your 3D foamie? Check ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR WATERPROOF 1/10 BRUSHLESS POWER SYSTEM 4000KV/80A
| Features | ESC |
| Continuous Current | 80A |
| Burst Current | 95A |
| Resistance | 0.0009ohm |
| BEC output | 6V/1A |
| Dimension | 43 x 38 x 20mm |
| Weight | 88g |
| Model | 3650 Sensorless |
| Cont Current | 45A |
| Peak Current | 55A |
| Max Power (15sec) | 370W |
| Winding | 16T |
| Resistance | 0.0125ohm |
| Weight | 180g |
| Diameter | 36mm |
| Length | 53mm |
| Shaft Diameter | 3.175mm |
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection., ESC Specs:, Battery:, 2-3 cells Lipo (5-8 cells NI-xx), Motor type:, Sensorless brushless motors, Running mode:, Forward only or forward with reverse (user programmable mode), Motor Specs:, Kv:4000, No. of Poles:2, Includes:, 80A Sensorless Brushless ESC,
An extremely powerful brushless system for any 1/10 or 1/12 ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR WATERPROOF 1/8 BRUSHLESS POWER SYSTEM 2100KV/120A
| Features | ESC |
| Continuous Current | 120A |
| Burst Current | 140A |
| Resistance | 0.00035ohm |
| BEC output | 6V/3A |
| Dimension | 43 x 39 x 33mm |
| Weight | 141g |
| Model | 4365 Sensorless |
| Cont Current | 80A |
| Peak Current | 140A |
| Max Power (15sec) | 1680W |
| Winding | 2.0D |
| Resistance | 0.0086ohm |
| Weight | 315g |
| Diameter | 43mm |
| Length | 66mm |
| Shaft Diameter | 5mm |
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection., ESC Specs:, Battery:, 2-4 cells Lipo (6-14 cells NI-xx), Motor type:, Sensorless brushless motors, Running mode:, Forward only or forward with reverse (user programmable mode), Motor Specs:, Kv:2100, Includes:, 120A Sensorless Brushless ESC,
An extremely powerful brushless system for any 1/8 scale truck, ...5 Reviews
HobbyKing
BRUSHLESS OUTRUNNER 3536 850KV WITH PROPELLER ADAPTER
| Max current | 45A |
| Max Power | 450w |
| Cell count | 11.1v (3s) |
| Idle current | 1.2 |
| Resistance | 0.065mh |
| Suggested ESC | 50A |
| Diameter of shaft | 5mm |
| Dimension | 35mm x 36mm |
| Bolt holes spacing | 16mm & 19 mm |
| Connection | 3.5mm |
| Weight | 126g |
| Includes | Propeller adapter |
| Note | Does not include X type motor mount |
Spec:, Total length:, 85mm (including prop adapter), Bolt thread:M3,
HobbyKing
NTM PROP DRIVE 28-26 1000KV / 315W (SHORT SHAFT VERSION)
| Motor Wind | 19T |
| Max current | 21A |
| Weight | 54g |
| ESC | 20~30A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 16mm & 19mm |
| Note | An accessory pack is available for this motor. Please see the related items below. |
Specs:, Model:, NTM Prop Drive Series 2826 1000kv, Kv:1000rpm/v, Poles:3, Max Power:, 200W @ 11.1V (3S) / 315W @ 15V (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Test Data:, 9x4.7 - 11.1V / 113W / 10.2A / 0.632kg thrust,
This is a short shaft version of our popular NTM ...5 Reviews
HobbyKing
2.0MM MALE/FEMALE BULLET BRUSHLESS MOTOR EXTENSION LEAD 200MM
| Spec | Plugs |
| Length | 200mm |
| Wire | 20 Awg soft silicone |
Weight: 8g,
2.0mm Male/Female bullet on opposing ends, to suit Multistar Modular ...HobbyKing
TURNIGY MULTISTAR 4822-690KV 22POLE MULTI-ROTOR OUTRUNNER
| KV(RPM/V) | 690 |
| Max Surge Watts(W) | 320 |
| Working current | 16 amps |
| Max.current(10s) | 22 amps |
| No Load Current | 0.85 amp |
| Intemal Resistance | 0.052 ohm |
| Dimensions(Dia.xL) | 47.5 x 25 mm |
| Shaft | 6 mm |
| Prop | 12 x 3 - 14 x 5 |
| Weight | 95 g |
Spec:, Lipo cells:4s, Number of Poles:22,
Looking for the ultimate power system for your next Multi-rotor ...5 Reviews
HobbyKing
M3.5 X 65MM STAND-OFFS WITH CLEARANCE
| Depth | 5mm |
| Lenght | 31mm |
| Depth | 3mm |
| Lenght | 20mm |
HobbyKing
M3.5 X 115MM STAND-OFFS WITH CLEARANCE
| Depth | 5mm |
| Lenght | 70mm |
| Depth | 3mm |
| Lenght | 30mm |
1 Reviews
HobbyKing
NTM PROP DRIVE 28-30S 800KV / 300W BRUSHLESS MOTOR (SHORT SHAFT VERSION)
| Max current | 20A |
| Max Power | 300W |
| Shaft | 3mm |
| Weight | 65g |
| ESC | 20~30A |
| Cell count | 3s~6s Lipoly |
| Bolt holes | 16mm & 19mm |
Specs:, Model:, NTM Prop Drive Series 28-30A 800kv (short shaft version), Kv:800rpm/v, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 8x4E - 22.2V / 310W / 13.9A / 1.11kg thrust, Note:, An accessory pack is available for this motor. Please see the related items below.,
This is a short shaft version NTM 28-30S 800kv brushless ...5 Reviews
HobbyKing
NTM PROP DRIVE 28-36 1000KV / 400W BRUSHLESS MOTOR
| Motor Wind | 14T |
| Max current | 30A |
| Max Power | 400W |
| Shaft | 4mm |
| Weight | 89g |
| ESC | 30~40A |
| Cell count | 3s~6s Lipoly |
| Bolt holes | 16mm & 19mm |
Specs:, Model:, NTM Prop Drive Series 2836 1000kv, Kv:1000rpm/v, Poles:3, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Test Data:, 11x7E - 11.1V / 220W / 20A / 976g thrust, Note:, An accessory pack is available for this motor. Please see the related items below.,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
TURNIGY 250 SERIES 3600KV BRUSHLESS OUTRUNNER HELICOPTER MOTOR
| RPM | 3600kv |
| Max Current | 18A |
| Max Power | 190W |
| Idle Current | 1.5A |
| Resistance | 0.081ohms |
| Shaft | 2.3mm |
| Connector | 2mm bullet |
| Bolt Hole Spacing | 19mm |
| Weight | 37g |
Specs:, Operating Voltage:, 7.4~11.1V (2~3S lipoly),
Turnigy Heli series outrunner motors are an excellent upgrade for ...5 Reviews