HobbyKing
NTM PROP DRIVE 3542 SERIES REPLACEMENT SHAFT
| Shaft length | 64mm |
| Shaft diameter | 4mm |
5 Reviews
HobbyKing
NTM PROP DRIVE 4248 SERIES REPLACEMENT SHAFT
| Shaft length | 70mm |
| Shaft diameter | 5mm |
5 Reviews
HobbyKing
NTM PROP DRIVE 28-26 1000KV / 315W
| Model | NTM |
| Motor Wind | 19T |
| Max current | 21A |
| Shaft | 3mm |
| Weight | 54g |
| Cell count | 3s~4s |
| Bolt holes | 16mm & 19mm |
| Connection | 3.5mm Bullet |
| Note | An accessory pack is available for this motor. Please see the related items below. |
Specs:, :1000rpm/v, Poles:3, Max Power:, 200W @ 11.1V (3S) / 315W @ 15V (4S), :20~30A, Bolt thread:M3, Prop Test Data:, 9x4.7 - 11.1V / 113W / 10.2A / 0.632kg thrust,
NTM Prop Drive motors are rock-solid performance outrunner s with ...5 Reviews
HobbyKing
HOBBYKING DONKEY ST380L-3600KV BRUSHLESS INRUNNER CAR MOTOR (13.5T)
| RPM/v | 3600kv (13.5T) |
| Dimensions | 27.6mm x 46mm |
| Shaft | 3mm |
| Voltage | 7.4v~11.1v |
| Weight | 140g |
| No-load current | 1.5A @ 7.4v |
| Max Current | 30A |
| Max Watts | 300W |
Specs:,
When pulling power matters and looks.. well.. just dont, then ...HobbyKing
TURNIGY EASYMATCH G160 SERIES - REPLACEMENT SHAFT
| Shaft length | 88mm |
| Shaft diameter | 8mm |
5 Reviews
HobbyKing
TURNIGY EASYMATCH G110 SERIES - REPLACEMENT SHAFT
| Shaft length | 78mm |
| Shaft diameter | 13mm |
HobbyKing
TURNIGY EASYMATCH G60 SERIES - REPLACEMENT SHAFT
| Shaft length | 81mm |
| Shaft diameter | 6mm |
HobbyKing
TURNIGY EASYMATCH G32 SERIES - REPLACEMENT SHAFT
| Shaft length | 71mm |
| Shaft diameter | 5mm |
5 Reviews
HobbyKing
TURNIGY EASYMATCH G15 SERIES - REPLACEMENT SHAFT
| Shaft length | 73mm |
| Shaft diameter | 5mm |
5 Reviews
HobbyKing
TURNIGY EASYMATCH PARK480 SERIES - REPLACEMENT SHAFT
| Shaft length | 50mm |
| Shaft diameter | 4mm |
5 Reviews
HobbyKing
9 INCH REPLACEMENT BLADES FOR VARIABLE PITCH MOTOR ASSEMBLY
,
9 inch Replacement Blades for Variable Pitch Motor AssemblyHobbyKing
TURNIGY LD2840A-1800KV BRUSHLESS MOTOR (400W)
| Dimension | 28mm x 40mm |
| Voltage | 7.4v~14.8v (2s~4s) |
| Max Power | 400w |
| Max Current | 30A |
| No load Current | 1.0A |
| Diameter of shaft | 4mm |
| Thrust | 800g |
| ESC | 40A |
Specifications:, Weight:, 79g (93g with all fittings, connectors & prop driver), Kv:1800rpm/V,
Turnigy LD2840A-1800kv Brushless Motor (400w)5 Reviews
HobbyKing
TURNIGY TRACKSTAR 8.5T SENSORED BRUSHLESS MOTOR 3983KV
| Can Size | 540 |
| Turns | 8.5 |
| RPM/v | 3983kv |
| Max voltage | 7.4~11.1V (2~3S) |
| Max Current | 33A |
| Max Watts | 365w |
| Resistance | 0.0141ohm |
| No Load Current | 5.8A |
| Shaft Size | 3.175mm |
| Can Diameter | 36mm |
| Can Length | 51.5mm |
| Weight | 158g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Poles:2, Sensored:, Yes (Standard 6 pin harness),
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 4.5T SENSORED BRUSHLESS MOTOR 7320KV
| Can Size | 540 |
| Turns | 4.5 |
| RPM/v | 7320kv |
| Max voltage | 7.4 (2S) |
| Max Current | 58A |
| Max Watts | 430w |
| Resistance | 0.0047ohm |
| No Load Current | 10A |
| Shaft Size | 3.175mm |
| Can Diameter | 36mm |
| Can Length | 51.5mm |
| Weight | 156g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Poles:2, Sensored:, Yes (Standard 6 pin harness),
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
HD2910-1700KV INDOOR/PROFILE/F3P OUTRUNNER MOTOR
| RPM/kv | 1700 |
| Idle Current | 0.7A |
| Lipoly | 2~3s |
| Max current | 5.1A |
| Suggested prop | 8x4 |
| Thrust | 240g |
| Shaft size | 3mm |
| Mount dimensions | 35mm x 35mm |
ESC:8A, Weight:, 21.2g (True weight including wires and connectors),
These superb little shockie motors offer great performance and great ...5 Reviews