HobbyKing
10MM SHAFT UNIVERSAL TRI MOTOR MOUNT
| Spec | Shaft Size |
| Inner Corner to Corner | 16mm |
| Outer Corner to Corner | 46mm |
| Weight | 5grams |
HobbyKing
TURNIGY AERODRIVE SK3 2822-1275 BRUSHLESS OUTRUNNER WITH SHORT SHAFT
| Turns | 40T |
| Voltage | 2~3S |
| RPM/V | 1275 |
| Internal resistance | 0.185 Ohm |
| Max Power | 95W |
| Shaft Dia | 3.0mm |
| Weight | 31g |
| Motor Plug | 3.5mm Bullet |
| Includes | Prop adapter |
Note:, This version has a flush length shaft - ideal for small Quadracopter projects! Easy to mount in Quad frames. Please refer to images., Max Loading:8A,
Turnigy SK3 Motors are the next leap forward in motor ...5 Reviews
HobbyKing
XK2445-3500KV BRUSHLESS INRUNNER
| Max Amps | 28A |
| Max Volt | 8.4V |
| Max Watts | 235W |
| Rpm/V | 3500kv |
| Resistance | 0.056 ohms |
| No-load Current | 1.9A |
| Dimension | 24mm x 45.0mm |
| Mounting hole depth | 4.5mm |
| Length of extend Shaft | 11mm |
| Shaft diameter | 3.175mm |
| Weight | 75.6g |
# of poles:4,
XK2445-3500KV Brushless Inrunner Specs.5 Reviews
HobbyKing
TURNIGY GLIDERDRIVE SK3 COMPETITION SERIES - 3858 - 4.6 1120KV
| Voltage | 3~4S Lipoly |
| RPM/V | 1120kv |
| Internal resistance | 0.021 Ohm |
| Max Loading | 58A |
| Max Power | 860W |
| Shaft Diameter | 5mm |
| Shaft Length | 20mm |
| Mounting screw Spacing | 25mm (M3x4) |
| Connector | 3.5mm bullet |
| Weight | 180g |
Specs:, Turns:8T, Motor Poles:14,
Turnigy SK3 Competition Series motors are the newest addition to ...5 Reviews
HobbyKing
TURNIGY HELIDRIVE SK3 COMPETITION SERIES - 4956-1250KV (550 & 600/.50 SIZE HELI)
| Voltage | 6S~8S Lipoly |
| RPM/V | 1250kv |
| Internal resistance | 0.0077 Ohm |
| Max Loading | 115A |
| Max Power | 4250W |
| Shaft Diameter | 6mm |
| Shaft Length | 31mm |
| Screw Mounting Spacing | 25mm/30mm (M4) |
| Weight | 372g |
Turns:6T, Motor Poles:8, Motor Plug:, 4mm Bullet Connector,
Turnigy SK3 Competition Series motors are the newest addition to ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 28-26 1100KV / 300W
| Motor Wind | 17T |
| Max current | 20A |
| Weight | 57g |
| ESC | 20~30A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 16mm & 19mm |
| Note | An accessory pack is available for this motor. Please see the related items below. |
Specs:, Model:, NTM Prop Drive Series 2826 1100kv, Kv:1100rpm/v, Poles:12, Max Power:, 200W @ 11.1V (3S) / 300W @ 15V (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests :, 8x4 - 11.1V / 100W / 9.1A/ 0.54kg thrust,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/10 13.0T 3000KV BRUSHLESS MOTOR
| Max Voltage | 16v |
| Max current | 32amps |
| Watts | 550 |
| Resistance | 0.0258Ohms |
| Max RPM | 50000 |
| Length | 50mm |
| Diameter | 35.8mm |
| Shaft dia. | 3.175mm |
| Shaft length | 15mm |
| Weight | 168g |
Specs:, Kv:3000,
Trackstar 3000Kv (13.0 Turn) sensorless brushless inrunner to suit 1/10 ...HobbyKing
TURNIGY TRACKSTAR WATERPROOF BRUSHLESS 1/10 SUPER STOCK POWER SYSTEM 3000KV/45A
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection., Motor Wind:, Motor KV:, Size:, Shaft Diameter:, Weight:, Cont. Current:, Burst Current:, Car Size:, Battery:, S-BEC:, Motor Type:, Size:, Weight:, Battery Plug:, On/Off Switch:, Reverse:, Thermal Overload Protection:, Battery Terminals:, Motor Terminals:, (Via Optional programming card),
Introducing the Turnigy TrackStar Waterproof Brushless 1/10 Super Stock, an ...HobbyKing
DR. MAD THRUST 40MM 8 BLADE EDF ELECTROPLATED VERSION 7000KV/3S
EDF Rotor Diameter:, Cell No:, Outer Diameter:, Overall length:, Shroud length:, Construction:, Weight:, Max RPM:, Max Power (10 sec):, Continuous Power:, Motor Type:, Max Voltage:, Max Amps:, Max Thrust:,
We've had the Doctor in again following an outbreak of ...