SDSHobby
POWER HD MICRO MINI ANALOG SERVO 1.5KG/9G HD-1900A W/POM GEAR AND PLASTIC CASE FOR RC AIRPLANES, HELICOPTERS AND SAIL PLANES
| Stall Torque | 1.2 |
| No Load Running Speed | 0.11sec/60° at 4.8V, 0.08sec/60°at 6.0V |
| Size(L*W*H) | 23.0 * 12.2 * 29.0 mm |
| Gear/ Case Type | POM/ plastic |
| Interface Type | compatible with JR & Futaba interface |
| Dead band width | ≤4us |
| Storage Temperature | -15 |
| Gear Qty. | 25T |
| Wire Length | 150mm |
| Recommended Servo Type | 25T Futaba |
| Voltage | DC 4.8V-6V |
| Application Fields | RC Airplanes, RC helicopters and RC Sail Planes. |
| Standard Servo Arms | one bag |
| Installation Screws | one bag |
| Analog Servo | 1pcs |
Specifications:, Weight: 9g, Bearing Qty.: NO, Included Parts:,
kg/cm at 4.8V , 1.5kg/cm at 6.0V °C ~55 °CSDSHobby
SKYRC BEC 3A
| Output Voltage | 5V or 6V |
| Current output | 3A continuous, 5A PEAK |
| Input voltage | 5.5V-26V, 2-6S Lipo battery |
| Size | 36mm*18mm*8.6mm (length*width*height) |
| Weight | 15g(with wires) |
Description:, The UBEC 3A, with 5V 6V voltage switch to select, all-metal enclosure shield and anti-interference filter with a ring., Specifications:,
Or 5 to 18 cells NiMH/NiCd batterySDSHobby
SKYRC E6650 MULTIFUNCTIONAL BALANCE CHARGER WITH BUILT-IN AC/DC ADAPTOR(50W)
| AC Input | 100-240Volt |
| DC Input | 11-18Volt |
| Circuit Power | Max. Charge Power 50W |
| Charge Current Range | 0.1-6.0A |
| Discharge Current Range | 0.1-1.0A |
| Current Drain For Balancing LiPo | 300mA/cell |
| NiCd/NiMH Battery Cell Count | 1-15Cells |
| LiPo/LiFe/Lilon Cell Count | 1-6Cells |
| Pb battery voltage | 2-20V |
| Net Weight | 433g |
| Dimension | 135x112x60.9mm |
Specifications:,
Max. Discharge Power 5WSDSHobby
SPRING RC ANALOG SERVO 7.8KG/55G S4306H WITH METAL GEAR FOR FUTABA 25T SERVO ARM
| Size | 40.3x20.2x36.0mm / 1.59x0.80x1.41in |
| Weight | 55g |
| Torque | 6.4kg/cm at 4.8V, 7.8kg/cm at 6V |
| Speed | 0.21sec/60°at 4.8V, 0.17sec/60°at 6V |
| Gear Material | 4 plastic gears+1metal gear |
| Servo Cable Length (mm) | 300 |
| Voltage | DC 4.8V-6V |
| Application Fields | engine powered airplanes, electric cars, gasoline cars and sailboats |
| Optional Servo Arm | 25T Futaba |
Specifications:, Bearing Qty.: 2, Rotation Angle:±, Features:, Included Spare Parts:,
60° Futaba, JR, Sanwa and Hitec compatible 4 plastic gears+1metal ...SDSHobby
SINGLE LIFE BATTERY PO4 26650PRO/ 3.2V 2500MAH 25C
Size:, 65mm(L)*26mm(Diameter), Capacity:, 500mAh, Voltage:, 3.2V, Net Weight:, 86g/3.0oz, Max. Continuous Discharging Current:, 5C/ 62.5A, Features:,
Specifications ï1⁄4š Suitable for remote control planes and other fields ...SDSHobby
SPRING RC ANALOG SERVO SM-S4303B 5.1KG/ 44G SERVO (DOUBLE BEARINGS) FOR FUTABA 25T SERVO ARM
Specifications:, , Size:, , Weight:, , Torque:, , Speed:, , Bearing Qty.:, , Gear Material:, , Rotation Angle:, , Servo Cable Length (mm):, , Voltage:, , Application Fields:, , Optional Servo Arm:, , Features:, , Packing Details:, , General packing:, , PE bag size:, , Net Weight:, , Gross Weight:, , Packing:, , Clamshell Size:, , Net weight:, , Gross weight:, , Included Spare Parts:,
41.3x20.7x40mm / 1.63x0.81x1.57in 44g/ 1.55oz 4kg/cm at 4.8V, 5.1kg/cm at ...SDSHobby
TWIN POWER SWITCH WITH FUEL DOT-RED COLOR
| Note | There is 1-2mm slight error for the manual measurement. |
Mounting Size:, L1=82.5mm, Features:, Two Switches: one for connecting and disconnecting the receiver circuit, another one for connecting and disconnecting the CDI circuit., Two plugs compatible with JR and FUTABA: one for connecting with receiver battery, another one for connecting with the CDI battery to supply power without opening the canopy., Application Fields:, Suitable for gasoline airplanes, nitro airplanes and model boats,
L2=70mm W=31mm D1=3mm One fuel dot with fuel filler can ...SDSHobby
TOWERPRO SERVO SG5010 4.5KG/39G WITH 25T FUTABA NYLON GEARS AND DUAL BALL BEARINGS
| Stall Torque | 3.1kg/cm at 4.8V, 4.5kg/cm at 6.0V |
| No Load Running Speed | 0.17sec/60° at 4.8V, 0.14sec/60°at 6.0V |
| Size (L*W*H) | 40.2 *20.2*43.2mm |
| Weight | 39g/ 1.44oz (Servo Net Weight Only) |
| Gear/ Case Type | nylon/ plastic |
| Output shaft gear qty | 25TFUTABA |
| Operating Voltage | 4.8-6V |
| Servo Cable Length | 300mm |
| Standard Servo Arms | four |
| Installation Screws | one bag |
| Digital Servo | 1pcs |
Specifications:, Bearing Qty.: 2, Interface Type:, compatible with JR & Futaba interface, Storage Temperature: 0, Dead band width:≤, Included Parts:,
℃ - 55 ℃ 0usSDSHobby
VB NI-MH POWER BATTERY 2000MAH 6V 5S FOR RC CAR RC BOAT
| Battery type | Ni-MH Power Battery |
| Capacity | 2000mAh |
| Voltage | 6.0V |
| Size (L*W*H) | 80*43*18mm |
| Net weight (g) | 170 |
| Connector type | FUTABA connector male |
| Discharge current | 5-10C |
| Application | RC car, RC boat |
Specifications:,
SDSHobby
VB NI-MH SC POWER BATTERY 3300MAH 7.2V 6S FOR RC CAR RC BOAT
| Battery type | Ni-MH Power Battery |
| Capacity | 3300mAh |
| Voltage | 7.2V |
| Size (L*W*H) | 133*48*25mm |
| Net weight (g) | 337 |
| Connector type | big Tamiya Plug Female |
| Discharge current | 5-10C |
| Application | RC car, RC boat, cordless power tool, vacuum cleaner and etc. |
Specifications:,
SDSHobby
VB NI-MH POWER BATTERY 1200MAH 6.0V 5S STANDARD PACKS FOR RC CAR RC BOAT
| Battery type | Ni-MH Power Battery |
| Capacity | 1200mAh |
| Voltage | 6.0V |
| Size (L*W*H) | 84*28*28mm |
| Net weight (g) | 113 |
| Connector type | TUTABA /JR connector |
| Discharge current | 5-10C |
| Application | for RC car, RC boat |
Specifications:,
SDSHobby
CNC ALUMINUM RADIO HOLDER RED COLOR
Features:,
Precisely CNC machined with high quality aluminum Material Makes this ...SDSHobby
CARBON FIBER VERTICAL TRIPLE RUDDER MOUNT/RUDDER TRAY SET FOR 50-150CC AIRPLANE
| Material | carbon fiber |
| Rudder Tray | L197*38mm, 1pcs |
| Carbon Fiber Servo Arm | L60*24mm, 1pcs; L92*27mm, 1pcs; L112*33mm, 1pcs |
| Aluminum Bearing Mount | D25*H18mm |
| Aluminum Stick | D5*H16mm |
| Aluminum Round Servo Plate | D25*3mm |
| Bearing | D11mm |
| Stainless Steel Push Rod | L38mm |
| Standard Bearing Head | D3*28mm |
| Connecting Rod | L23mm |
| Flat Screw | K2.5*6mm (black) |
| Set Screw | PWA2.3*12mm |
| Machine Screw A# with Wash | PM3*6mm |
| Machine Screw | PM2*8mm |
| Washer | D7*d3mm |
| Taper Washer | D3mm (copper) |
| Machine Screw with Wash | PM3*14mm |
Specifications:, Package Contents:, Nut: M2, Nylon Nut: M3,
L1=42.7mm W=22.4mm L2=53mm L3=122mm L4=190mmSDSHobby
DYNAM 6 CH RECEIVER 35MHZ JR
| Channel | 6 CH |
| Frequency | 35MHz |
| Certificate | CE, FCC |
Specifications:, Type: FM, Connector Type: JR,
This 6 Channel receiver is perfect for Collective Pitch flight. ...