SDSHobby
GT POGT POWER P4 PROFESSIONAL LIPO CHARGER WITH PARALLEL CHARGING SYSTEM
LED indication | red color for charging, green color for charger ready or battery cell fully charged. |
Specifications:, Input Voltage:, DC 9~15V, Output voltage:, 8.4V(4.2V*2S)*2pcs Lipo, Charging Current:, .0A, Charging Voltage:, 4.2V, Size:, 132*82*35mm, Net Weight:, 300g, Features:,
12.6V (4.2V*3S)*1pcs Lipo 16.8V (4.2V*4S)*1pcs Lipo Auto adjustment of the ...SDSHobby
GT POWER A6 BALANCE CHARGER AND DISCHARGER WITH MAX. CHARGING 50W AND 5A
Specifications:, Operating voltage range:, 10.0~18.0V, Max charging power:, 50W, Max discharging power:, 5 W, Charge current range:, 0.1~5.0A, Discharge current range:, 0.1~1.0A, Current drain for balancing Lipo:, 300mAh/cell, NiCd/Ni-MH battery cell count:, 1~10S, Lithium battery cell count:, 1~6S, Pb battery voltage:, ~20V, Weight:, 400g, Dimension:, 65*130*45mm,
SDSHobby
IMAX QUATTRO B6 COMPACT BALANCE CHARGER
Delta-peak sensitivity | The automatic charge termination program based on the |
Input voltage | 11-18V DC |
Total circuit power | 200Watts(4x50W) |
Charging current | 0.1-5A |
Dimension | 225.4x158.6x62.4mm |
Net weight | 1.09kg |
Processing time limit:, You can also limit the maximum process time to avoid any possible defect., Charging Specifications:, Battery Type, Specifications:,
Optimized operating software iMAX Quattro B6 features the so-called AUTO ...SDSHobby
IMAX B6AC+ MULTIFUNCTIONAL BALANCE CHARGER /BUILT-IN AC ADAPTER
NOTE | when balance charging Lithiumbatteries, both the balance tap and the main |
Charge current range | 0.1~5.0A |
Discharge current range | 0.1-1.0A |
Current drain for balancing Li-po | 300 mAh/cell |
NiCd/NiMH battery cell count | 1-15 cells |
Li-ion/Polymer cell count | 1-6 series |
Pb battery voltage | 2V, 20V |
B6AC+ Charger Includes:, Internal independent lithium battery balancer:, Employs an individual-cell-voltage, Balance individual cells during discharge:, During the discharge process, B6-Pro, Fast and Storage mode charging:, "Fast" charge will fully charge a lipoly battery in, Charges various types of LiPoly cells:, Includes charging programs for LiFe (A123),, Data store/load:, Up to 5 batteries' data can be stored for easy programming., Cyclic charging/discharging:, 1-5 cycles of either charge>discharge or dischage>charge, B6AC+ Specs:, Operating voltage range:, AC 100-240V, DC 11.0~18.0 Volt, Circuit power:, Max. charge power 50W,
Charger with built-in AC adapter - use at home and ...SDSHobby
KDS BRUSHLESS MOTOR BL3648 700KV FOR 1.2-METER FIXED-WING AIRCRAFT
Max. Speed of Revolution | 3650RPM/V |
Specification:, Motor Diameter (mm):, 8.3, :38, Shaft Diameter:, 3.17mm, Working Voltage:, 11.1V, Working Current:, 30A, Max. Power:, 350W, Weight:, 78,
Motor Length (mm)( shaft not included) gSDSHobby
KDS 1.8KG /9G DIGITAL SERVO/ SWASHPLATE SERVO WITH PLASTIC GEARS FOR KDS450 HELICOPTER
Output Torque | 1.4kg.cm at 4.8V, 1.8kg.cm at 6.0V; |
Speed | 0.09sec/60 at 4.8V, 0.07sec/60 at 6.0V; |
Working Voltage | DC 4.8V-6V |
Working Temperature | -20 |
Dimension | 24x12x24mm |
Application | could be used as |
Specifications:, Weight: 9g,
℃ - 60 ℃ swashplate servo for KDS450 series helicopter ...SDSHobby
KDS SIMPLE CHARGER 8.4V/12.6V (OUTPUT) FOR 2S-3S LITHIUM BATTERY
Specifications:, Input Voltage:, DC 11.5-13.5V, Input Current:, DC 1.5A, Output Voltage:, DC, Output Current:, DC 800mA, Recommended Power:, KDS-04-EU (Euro Standard Plug) , KDS-04-USA (USA Standard Plug),
8.4V/12.6VSDSHobby
KV4370 2848-4370 FSD BRUSHLESS INRUNNER MOTOR FOR RC CAR/ RC BOAT/ RC HELICOPTER
KV (rpm/v) | 4370 |
Motor Diameter (mm) | 27.8 |
Shaft Diameter (mm) | 3.14 |
Total Weight (g) | 180 |
Max. Power (w) | 500 |
Resistance (KΩ) | 0.0127 |
Idle Current (A) | 2.4 |
Application Fields | model helicopters, boats and cars |
Cells Ni-Cd/Ni-MH | 6S-9S |
Cells Li-Po | 2S-3S |
Specifications:, Motor Length (mm): 48, Shaft Length (mm): 11, Wire Length (mm): 67, The number of Poles: 2, Wire Winds: 9, Max. Current (A): 46, ESC:≥,
Recommend Equipments (need to buy separately) 46ASDSHobby
LEOPARD 2835-8T KV1038 OUTRUNNER BRUSHLESS MOTOR FOR FIXED-WING AIRPLANE
KV Value(RPM/V) | 1038 |
Banana Plug Diameter(mm) | 3.5 |
No-load Current(A) | 1.1 |
Continuous Current (A) | <20 |
Pull(KG) | 1.2 |
Internal Resistance (ohm) | 0.0778 |
Li-Po Battery | 3-4S |
Propeller | 9-10 inch |
Specification:, Motor Diameter(mm): 28, Motor Length(mm): 35, Extended Shaft Length(mm): 12, Extended Shaft Diameter(mm): 4, Max Load Current (A): 25, Weight(g): 68, Recommended Equipments (need to buy separately):,
SDSHobby
LIFE BATTERY PACK PO4 26650S/ 6.4V 2500MAH 20C 2S1P
Size:, 65mm(L)*53mm(W)*26mm(H), Capacity:, 500mAh, Net Weight:, 167g/5.9oz, Voltage:, 6.4V, Max. Continuous Discharging Current:, 0C/ 50A, Plug Type:, JR Anode Plug+ Balance Charger Plug, Features:,
Specifications ï1⁄4š Available to be used as CDI battery for ...SDSHobby
MINI SERVO SECTIONBOARD POWER BOX FOR GAS PLANE WITH 30A UBEC
Working voltage | 7-13V |
Steering current, voltage | 0-30A ,4.8-9 .7 V (factory voltage is 5.2V) |
Weight | 80g |
Volume | 116mm(long)*88mm(wide)*13mm(height) |
Working temperature | -20°C to 85°C. |
Specification:, Features:, , Integrated 30ABEC ( MXA: 40A ) using linear regulator makes the power pure, which can provide sufficient current to the actuator.,
Double power input to improve the stability of power supply, ...SDSHobby
MAX FORCE 35C 4400MAH 6-CELL/6S 22.2V LI-PO BATTERIES FOR T-REX 600
Max Charging Current | 5C/22A |
Max Cont. Discharging Current | 35C/154A |
Max Burst Discharging Current | 65C/286A |
Size | H23*W50*L163 mm |
Net Weight | 598g |
Plug Type | Deans Plug and Balance Chargeable Plug |
Application | for T-REX 600, etc. |
Specifications:,
SDSHobby
MAX FORCE 25C 900MAH 3-CELL/3S 11.1V LI-PO BATTERIES
Max Charging Current | 5C/4.5A |
Max Cont. Discharging Current | 25C/22.5A |
Max Burst Discharging Current | 45C/40.5A |
Net Weight | 77g |
Size | H21*W30*L56mm |
Plug Type | Deans Plug and Balance Chargeable Plug |
Specifications:, Kindly Remark:, Pictures for reference only, because the product constantly upgrade, so the appearance of the few products maybe small change, but the technology parameters is perfectly, quality is guaranteed.,
SDSHobby
MULTI CHARGER Q6
- Input voltage | 11-18.0V |
- Charge power | 4×50W |
- Discharge power | 4×5W |
- Discharge current range | 0.1~1.0A |
- Charge current range | 0.1-5.0A |
- Current drain for balancing Li-Po | 300mAh/cell |
- Data store | max.5 data of batteries |
- NiCd/NiMH battery cell count | 1 - 15cells |
- LiPo/LiLo/LiFe battery cell count | 1 - 6cells |
Advantages:, 1. Intelligent operation, Specifications:, - Pb battery voltage: 2V, Included:, 1) Universal crocodile clips,
With four independent output, you can charge 4 battery packs ...SDSHobby
MULTI CHARGER Q6AC WITH BUILT-IN ADAPTOR 220V
1. Input voltage range | AC 220V |
. Input voltage range | DC 11.0V~18.0V |
3. Charge current range | 0.1A~5.0A |
4. Discharge current range | 0.1A~1.0A |
5. Charge power limited | max.50W x 4 |
6. Discharge power limited | max.5W x 4 |
7. Balance current | max.250mA |
8. Balance tolerance | ±0.01V |
9. Ni-Cd/Ni-MH battery cell count | 1~15cells |
10. Lithium battery types | Li-Po, Li-ion, Li-Fe |
11. Lithium battery cell count | 1-6series |
12. Pb battery voltage | 2V-20V |
13. Weight | 1080g |
14. Dimensions | 228x171x65mm |
Specifications:, , Advantages:, 1. Intelligent operation, Included:, 1) Universal crocodile clips,
. Charging will be accurate to 0.01V 3. Built-in balance ...