ngHobbies
FATSHARK POWER SHIELD
This power shield is provided by Fatshark for those who would want to power their headset from a battery with Deans connector. The power shield provides short circuit and reverse polarity protection. The Deans connector not included, if you need one you can purchase it from here:, Deans Connector Pair,
ngHobbies
ALTITUDERC NANO 25MW 5.8GHZ TRANSMITTER
Operating Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
Weight | 3 grams |
Size | 23.6 x 20mm |
Input voltage range | 3 - 12.6 V |
Parameters:, 25mW output power, Content of the package:, 1 x 25mW Transmitter module, Note:, The use and operation of this product in Canada and United States will require a HAM or Amateur radio license. Please check with your local authorities before purchasing this product.,
The 25mW transmitter designed by Altitude RC nano size is ...ngHobbies
800MW 910MHZ 1CH TRANSMITTER
Features:, Frequency:, 910MHz, Number of Channels:, 1, Modulation:, FM, Transmission Range:, 1 km plus, Power Consumption:, 500mA, Output Power:, 800mW, Operation Voltage:, 12V, Power Supply:, 12V/500mA (not included), Antenna Connector:, SMA Connector, Weight:, 7.9 g, Dimensions:, 50.0 x 25.7 x 8.0 mm, Note:, While this transmitter might work with other 900Mhz receivers as well, please note only guarantee the above ranges and signal quality when used in conjuntion with the, Documentation:, Warranty:, 3 months, Note:, The use and operation of this product will require a HAM or Amateur radio license., Important note for Canada customers:,
If this transmitter is shipped to a USA address, it ...ngHobbies
GOPRO HERO 3 FPV CABLE WITH POWER
. The USB connector fits the GoPro Hero 3 cameras AV plug and the 3 pin servo type connector has been provided to be a convenient connection to other FPV transmitter solutions. The 3 pin servo connector has the following connections:, Brown - Ground connection, The power requirement for the GoPro camera is minimum 1A at 5V. The provided servo cable connections are:, Red - +5V (Do not exceed 5V), Please note:, The Immersion RC or Fatshark transmitters CANNOT supply enough power on the 5V out line to power the GoPro camera in flight. DO NOT risk it, it will damage your Immersion RC transmitter - or you will loose your transmitter in the air!!!,
Beside the FPV audio and video feed from a GoPro ...ngHobbies
433MHZ 'SANDER STYLE' WHIP
,
This simple, lightweight, 433MHz antenna is included with our EzUHF ...ngHobbies
FATSHARK 24 CH BETA 5.8GHZ RECEIVER MODULE
This receiver can be set to 3 different bands:, A.) 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725Mhz, The Dip-switch settings for the above bands are:, A.) 0-1, Documentation:, Click here,
provide reception for the transmitters tuned to the other 5.8Ghz ...ngHobbies
7" FPV DISPLAY, 23CH DUAL RX AND BUILT IN BATTERY
The display is a 16 | 9 aspect ratio, but the incoming video can be configured to 16 |
Panel size | 7.0 inch |
Panel type | TFT LCD |
Resolution | 800×480 |
Backlight | LED |
Batttery | built in 2200mAh 2 cell LiPo |
Horizontal frequency range | 30~ 60 kHz |
Field frequency range | 50 ~75 Hz |
Dot pitch | 0.0642(W)×0.1790(H)mm |
Brightness | 400cd/㎡ |
Contrast ratio | 500 |
Response time | 15 ms |
Viewing angle | 70°/70°(L/R) 50°/60°(U/D) |
Power requirement, input voltage | DC 6 ~18V middle pin positive |
Power consumption | ≦ 7W |
Operation temperature range | -20℃~60℃ |
Storage temperature range | -30℃~70℃ |
Dimension Unit size | 209(L)×147(W)×35(H) mm |
Unit weight | 540 g |
Connector type | standard SMA |
NGHobbies is happy to bring you this 5.8Ghz dual diversity 7" FPV display with built in battery specifically designed for FPV purposes as this display will not go "blue screen" when the wireless signal drops out for a few seconds. This is the first ground station monitor, designed specially for FPV outdoor use. With its high resolution (800*480), high contrast ratio (500:1) and brightness of 400cd/ ㎡ this is really the best choice for theFPV flyer who chooses to fly with a monitor instead of goggles., Specifications:, Display ratio: 16:9, Number of channels on 5.8Ghz: 32, Documentation:, Dip switch reference guide for channel selection,
The included hard case sun shade, with a plastic frame ...ngHobbies
1.3GHZ BLUEBEAM ULTRA SET
Package Contains:, 1 x 3 lobe Airscrew transmitter antenna,
The BluBeam Ultra set contains a Mad Mushroom receiver antenna ...ngHobbies
700MW 2.4GHZ IMMERSIONRC TRANSMITTER (3CH)
Operating Frequencies | 2396Mhz, 2410Mhz, 2430Mhz |
Weight | 28 grams (without antenna) |
Size | 57 x 34mm |
Input voltage range | 6 - 25 v |
Parameters:, 700mW output power, Content of the package:, 1 x 700mW Transmitter module, Note:, The use and operation of this product in Canada and United States will require a HAM or Amateur radio license. Please check with your local authorities before purchasing this product.,
The new 2.4Ghz 700mW transmitter from ImmersionRC is bringing back ...ngHobbies
FATSHARK 8 CH 2.4GHZ RECEIVER MODULE
Dip position | 10, Airwave mode |
Dip position 01, Lawmate mode | 2370, 2390, 2410, 2430, 2450, 2470, 2490, 2510 |
Dip position 11, NW Int. mode | 2370, 2396, 2410, 2430 |
Documentation | N/A |
This receiver can be set to 3 different bands:,
provide reception for the transmitters tuned to 3 different 2.4Ghz ...ngHobbies
1.5W 1.3GHZ TRANSMITTER
Features:, Frequency Band:, 1280MHz Locked, Number of Channels:, 1, Audio Sub-carrier:, 5.5MHz, Transmission Range:, 1800 Meter plus, Power Consumption:, 600mA, Output Power:, 1500mW, Operation Voltage:, 12, Power Supply:, 12V/750mA, Antenna Connector:, SMA Connector, Weight:, 30 g, Dimensions:, 70 x 25.7 x 8 mm, Documentation:, , Warranty:, 3 months, Note:, ** The power level of this transmitter may be illegal in your country. Please check your local regulations and make sure you order this device only if you have the required licensing to use this product.,
Highly integrated 1.3 GHz transmitter. These transmitters are locked on ...ngHobbies
1 INCH 2.4GHZ HELICAL STAB ANTENNA WITH SMA
,
The RH Series utilizes a helical element to greatly reduce ...