ReadyMadeRC
SKYLARK OSD/AAT ANTENNA TRACKER COMBO PACKAGE
Antenna Tracker:, No tools needed for assembly,
Features Tracks 360º horizontally and 90º vertically Include compass for ...ReadyMadeRC
PAN/TILT BASIC KIT
| Note | careful routing of camera wiring is required to prevent binding. |
| Manual | Basic Pan/Tilt |
Comes with a mounting plate that will fit many popular FPV cameras including:, , Note: Currently the back plates are designed for the pan/tilt system being installed on top of the aircraft. If you plan on mounting the assembly inverted under the aircraft, some modifications to the back plate may be required. Send me an e-mail, I have some inverted mounts available., This kit includes:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required. The system was designed for TG9e/HS-65HB servos., You'll need to supply:, ,
This is a stand alone pan/tilt FPV module without the ...ReadyMadeRC
8 CHANNEL SERIALIZER PWM TO PPM ENCODER
,
This serializer, also called a "PWM to PPM encoder" allows ...ReadyMadeRC
1.3 GHZ SKEW-PLANAR WHEEL WHIP ANTENNA (RHCP) RIGHT ANGLE (IBC)
| Gain | .92dbic |
| Beam width | 360 degree doughnut |
| Multipath rejection | 9db |
| Polarization | RHCP |
ReadyMadeRC
1.3 GHZ CLOVERLEAF WHIP ANTENNA -STRAIGHT (IBCRAZY)
| Gain | 1.25dbic |
| Beam | 360 degree doughnut |
| Polarization | RHCP |
| Rejection | 9db |
ReadyMadeRC
RMRC-PICO 12V (6-24V) ULTRA COMPACT CAMERA NTSC
,
This is an AMAZINGLY small camera with a great picture ...ReadyMadeRC
MINI PAN/TILT MODULE WITH SERVOS
,
This is the plastic pan/tilt assembly with servos that comes ...ReadyMadeRC
1500MW 1300MHZ TRANSMITTER - INTERNATIONAL - OLD VERSION
,
DO NOT BACK ORDER, ONLY ONE LEFT OF INTERNATIONAL VERSION ...ReadyMadeRC
VAS - 2.4 GHZ BLUEBEAM WHIP ANTENNA SET RHCP - STRAIGHT
| Contains TWO antennas | 3 lobe TX, and 4 lobe RX |
| Max speeds without significant deflection | 110 mph |
| Connector type | SMA male straight. RIGHT ANGLE ADAPTER INCLUDED! |
| Whip length | 2″/5cm |
Radiation pattern:,
The Blue Beam antenna set is a direct fit circularly ...ReadyMadeRC
CINEMIZER OLED VIDEO GLASSES
| 24 Bit RGB color depth- FoV (Field of View) | 30° |
| HDMI | 720p, 1080p and 3D (Frame Packing) |
| AV-In | 3,5mm / 4pin jack for audio & video (PAL/NTSC) |
| Battery-Box | 60 g, HDMI-Adapter 30 g |
It's Time to Upgrade:, It's time to move up to the most advanced and highest quality video glasses available for FPV! With features not seen in other popular FPV goggles such as diopter adjustment (for individuals that wear glasses), ear slider for comfort, and high resolution OLED displays, these are sure to be the new favorite for FPV'ers everywhere!, Display adjustments including:, , Aspect ratio 16:9,
The lightweight and compact Cinemizer OLED is packed with engineering ...ReadyMadeRC
2500MW 1300MHZ TRANSMITTER - NEW CUSTOM READYMADERC US VERSION
| Weight with case and antenna | 4.6oz. |
| Case Dimensions | 93x52x20mm |
*Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
WE'VE OPENED UP A WHOLE NEW FREQUENCY FOR LEGAL USE ...ReadyMadeRC
AIRSPEED MICROSENSOR V3
| Circuit Board | Weight 4 grams (0.15 oz), dimensions 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”) |
ReadyMadeRC
G-FORCE MICROSENSOR - HIGH G SENSOR
| Resolution | approx. 0.05 G in each axis |
| Power input (Standalone Mode) | 4V to 16V (6V max for High G Sensor) |
| Weight | approximately 4 grams (0.15 oz) |
| Dimensions | approximately 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”) |