ngHobbies
RCV922 CAMERA (PAL)
| Board Lens | ships with f3.6 mm lens mounted |
| Dimension | 25 X 25mm |
| Power | DC 3.3-5V |
| Please note the picture comparing the 3 mostly used FPV cameras | The RCV922 Camera, the KX131 and the IF camera. |
Attention:, This camera ships with the original cable crimped o match the ImmersionRC 10mW transmitter which comes with the Fat Shark goggles.,
COMPACT SIZED COLOUR SQUARE CAMERA 1/3" Sony CCD / 420TV ...ngHobbies
GWS 360 DEGREE SAIL WINCH SERVO
Detailed Specifations:, Bearing Type:, Dual Ball Bearing, Speed:, 0.26 sec @ 60 deg. and 1.56sec @360deg., Torque:, 6.6 / 7.6 kg.cm, Size:, 40.50 x 20.00 x 42.00mm, Weight:, 50.00g,
This is the GWS S125 1T servo. 1T = 1 ...ngHobbies
DOGFIGHTER LIGHT PACK OMNI HIT SENSOR
| http | //www.youtube.com/embed/CRhzsxaGNGs |
| http | //www.youtube.com/embed/mDQwQQfyXAU |
Package content:, 1 x DogFighter Light Pack Omni Hit Sensor, Demo Video:, , Product Video:, Documentation:, Click on the following links to access the available documentation:, DogFighter Combat Simulation System,
The well known EMR Laboratories presents yet another excellent product ...ngHobbies
3 PIN MOLEX CONNECTOR
| Pitch | 1.25mm |
| Type | Pico blade |
Contacts: 3,
This is a pair of 3 pin molex replacement connector ...ngHobbies
SPIRONET 5.8GHZ RH V2 ANTENNA SET
,
This is the SpiroNET 5.8GHz circular polarized antenna from ImmersionRC ...ngHobbies
HITECH HS-82MG STANDARD MICRO SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, None, Speed:, 0.12 / 0.10 sec @ 60 deg., Torque:, 38.88 / 47.22 oz.in (4.8v/6v), Size:, 12.00" x 1.17" x 1.16", Weight:, 0.66oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
We take one our top selling servos and make it ...ngHobbies
UNO 5.8GHZ V2 RECEIVER
| Receiver sensitivity | -85dBm |
| Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Weight | 120 grams |
| Size | 80 x 70 x 22mm |
| Input voltage | 6 – 13V at 500 mA (3s Lipo Ideal) |
| Documentation | Coming soon |
Features:, A/V receiver with one antenna input,
The Immersion RC's 5.8Ghz UNO V2 receiver is the scaled ...ngHobbies
KX 181 HQ CAMERA (NTSC)
| Imaging | 1/3" SONY CCD |
| Horizontal Resolution | 520 TV Line |
| Auto White Balance S/N Ratio | Better than 46dB |
| Gamma Characteristic | 0.45 (AGC Off) |
| Minimum Illumination | 0.1 Lux |
| Power | 12V±10% DC @ 100mA |
| Dimension | 25 X 25mm |
Shipping with: f: 3.6mm mini lens,
ngHobbies
100MW LM 2.4GHZ MINI TRANSMITTER
Please note: This product will not be sold/shipped to USA customers. Your order of the product will be cancelled and your payment refunded., Features:, Frequency Band:, 2400MHz, Number of Channels:, 8, Audio Sub-carrier:, 6.5MHz, Transmission Range:, 100-200 Meter, Power Consumption:, 280mA, Output Power:, 100mW, Operation Voltage:, 5-5.5V, Power Supply:, 5V/500mA, Antenna Connector:, Un-detached, Weight:, 10 g, Dimensions:, 12 x 24 x 7 mm, Documentation:, , Warranty:, 6 months, Note:, The use and operation of this product will require a HAM or Amateur radio license., Important note for Canada customers:, Please note, channels 4,5,6,7 and 8 of this transmitter are outside of the allowed frequency spectrum for Canada. These channels cannot be legally used even if you have a Radio Amateur license. Please make sure that you obey Industry Canada regulations around use of these devices and use them only on channels 1, 2 and 3. New Generation Hobbies cannot be held responsible for using these transmitters on channels which are outside of the legal allowed frequency ranges.,
Highly integrated mini 2.4 GHz transmitter with well known quality ...ngHobbies
100MW LM 1.2GHZ MINITRANSMITTER
Please note: This product will not be sold/shipped to USA customers. Your order of the product will be cancelled and your payment refunded., Features:, Frequency Band:, 1200MHz, Number of Channels:, 6, Audio Sub-carrier:, 5.5MHz, Transmission Range:, 100-200 Meter, Power Consumption:, 280mA, Output Power:, 100mW, Operation Voltage:, 5-5.5V, Power Supply:, 5V/500mA, Antenna Connector:, Un-detached, Weight:, 10 g, Dimensions:, 12 x 24 x 7 mm, Note:, The use and operation of this product will require a HAM or Amateur radio license., Important note for Canada customers:, Please note, all channels of this transmitter are outside of the allowed frequency spectrum for Canada. These transmitters cannot be legally used in Canada even if you have a Radio Amateur or HAM license. Please make sure that you obey Industry Canada regulations around use of these devices. New Generation Hobbies cannot be held responsible for using these transmitters on channels which are outside of the legal allowed frequency ranges., Documentation:, , Warranty:, 6 months,
Highly integrated mini 1,2 GHz transmitter with well known quality ...ngHobbies
100MW 5.8GHZ FATSHARK TRANSMITTER
| Operating Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Weight | 20 grams |
| Size | 57 x 34mm |
| Input voltage range | 6 - 16 v |
Parameters:, 100mW output power, Content of the package:, 1 x 100mW Transmitter module, Note:, The use and operation of this product in most states, countries may require a HAM or Amateur radio license. New Generation Hobbies cannot be held responsible for your actions if you use this product without proper licensing.,
The Fatshark 5.8Ghz 100mW transmitter is a state of art ...ngHobbies
12/5VOLT 2 CHANNEL VIDEO SPLITTER V2
Manual:, Download here,
For the ultimate diversity system, New Generation Hobbies brings you ...ngHobbies
12V CAMERA HARNESS FOR IMMERSIONRC TRANSMITTERS
Instructions:, Step 1:, Solder the 5 pin cable which came with your ImmersionRC transmitter on your camera: black wire to black wire, red wire to red wire, yellow wire to yellow wire. The green and the white from the connector can be isolated, these are audio wires unless you use a microphone you do not need them. Use a heat shrink to secure the connections., Step2:, Plug the camera cable prepared in step one into the harness. You will need to plug the 2 male connectors of this harness into your InnersionRC or Fatshark tranmsitter, 2 pin connector to the power connection, 5 pin connecto to the A/V connector., Step3:, Plug the 3S (3 cell) LiPo battery into the JST connetor of the harness., Warning:, Do not ever use this harness with 5V cameras. Also make sure you never use more tha 3 cell LiPo's to supply power to this harness. The voltage from the battery is directly fed to the camera, if you use more than 3 cell LiPo you will smoke your camera right away.,
This FPV cable harness offers connection for 12V cameras to ...