ngHobbies
400MW 900MHZ TRANSMITTER
| CH1 | 910 |
| CH2 | 980 |
| CH3 | 1010 |
| CH4 | 1040 |
Highly integrated 900 MHz, 400mW transmitter with digital display. Very low heat. Compact size, low power consumption. The frequencies associated with the 4 channels are:, Features:, Frequency Band:, 900MHz, Number of Channels:, 4, Modulation:, FM, Transmission Range:, 1 km plus, Power Consumption:, 300mA, Output Power:, 400mW, Operation Voltage:, 12V, Power Supply:, 12V/500mA (not included), Antenna Connector:, SMA Connector, Weight:, 7.9 g, Dimensions:, 50.0 x 25.7 x 8.0 mm, Note:, While this transmitter might work with other 900Mhz receivers as well, please note only guarantee the above ranges and signal quality when used in conjuntion with the, Documentation:, Warranty:, 3 months, Note:, The use and operation of this product will require a HAM or Amateur radio license., Important note for Canada customers:, , Please note: channels 2,3,4 of this transmitter are outside of the amateur frequency spectrum for Canada. These channels cannot be legally used even if you have a Radio Amateur or HAM license. Please make sure that you obey Industry Canada regulations around use of these devices. New Generation Hobbies cannot be held responsible for using these transmitters on channels which are outside of the legal allowed frequency ranges.,
If this transmitter is shipped to a USA address, it ...ngHobbies
GBM4108-130T BRUSHLESS GIMBAL MOTOR
| Number of turns | 130 |
| Wire diameter | 0.15mm |
| Motor size | 46mm x 28mm |
| Internal resistance | 16 ohms |
| Motor weight | 83gr |
| Recommended camera weight | 400-800gr |
Motor Specifications:,
The brushless gimbal motors are all hand wound to be ...ngHobbies
GBM4215-120T BRUSHLESS GIMBALL MOTOR
| Number of turns | 120 |
| Wire diameter | 0.19mm |
| Motor size | 42mm x 28mm |
| Internal resistance | 15 ohms |
| Motor weight | 66gr |
| Recommended camera weight | 800-1000gr |
Motor Specifications:,
The brushless gimbal motors are all hand wound to be ...ngHobbies
GBM5010-150T BRUSHLESS GIMBALL MOTOR
| Number of turns | 150 |
| Wire diameter | 0.21mm |
| Motor size | 50mm x 38mm |
| Internal resistance | 14.5 ohms |
| Motor weight | 86gr |
| Recommended camera weight | 800-1500gr |
Motor Specifications:,
The brushless gimbal motors are all hand wound to be ...ngHobbies
FATSHARK BATTERY CHARGER ADAPTER WITH XT-60
,
This is a Fatshark battery charger adapter with XT-60 connector. ...ngHobbies
PIXIM SEAWOLF 690 LINE ULTRA WDR NTSC CAMERA WITH CASE
Specifictions:, 1/3"color DPS sensor., Note:, Please note we included a 3 pin camera cable for easy mounting on your FPV airplane. The big and heavy OSD cable is good for setting up th camera to the parameters you wish but it does not have to fly with the camera. A simple 3 pin cable can replace this supplying the camera with the neccessary 12V and providing the video out at the same time. Please check out the pictures below on how to use this cable or for the neccessary signal pins if you would like to use your own cable., :, Check this video out for image quality,
The 690 line Pixim Seawolf cameras 120db WDR makes it ...ngHobbies
FATSHARK MIG TRINITY HEADTRACKER
Features:, Built in gyroscopic sensors, Weight:, 150 gr., Documentation:, , Demo Video:,
This MIG headtracker was upgraded to host the new Trinity ...ngHobbies
3 METER DOMINATOR AV CABLE
| Yellow | Video |
| White | Audio Left |
| Red | Audio Right |
| Black female | Battery (power up to 12V) in |
| Black male | Battery (cross from the above battery in) out |
Compatible with:, Fatshark Dominator,
This 3m AV cable allows the user to share base ...ngHobbies
3M BASE FUTABA/RCA MULTI HEAD AV
| Yellow | Video |
| White | Audio Left |
| Red | Audio Right |
| Black female | Battery (power up to 12V) in |
| Black male | Battery (cross from the above battery in) out |
Compatible with:, Fatshark RCV922 Base,
This 3m AV cable allows the user to share base ...ngHobbies
GOPRO HERO 3 FPV IMMERSIONRC CABLE WITH POWER
. The USB connector fits the GoPro Hero 3 cameras AV plug and the 5 pin Molex type connector has been provided to be plug and play with the video 2.4GHz and 5.8GHz transmitters designed and manufactured by Immersion RC. The 5 pin Molex connector has the following connections:, Brown - Ground connection, The power requirement for the GoPro camera is minimum 1A at 5V. The provided servo cable connections are:, Red - +5V (Do not exceed 5V), Please note:, The Immersion RC or Fatshark transmitters CANNOT supply enough power on the 5V out line to power the GoPro camera in flight. DO NOT risk it, it will damage your Immersion RC transmitter - or you will loose your transmitter in the air!!!,
Beside the FPV audio and video feed from a GoPro ...ngHobbies
2 AXIS BRUSHLESS GIMBALL CONTROLLER
| http | //www.basecamelectronics.com/downloads/ |
Specifications:, USB connection for convenient firmware upload and configuration, Content:, This package contains all the items on the main picture:, Controller board,
The wires, headers and all the necessary connectors are pre-soldered ...ngHobbies
3 AXIS BRUSHLESS GIMBAL CONTROLLER
| http | //www.basecamelectronics.com/downloads/ |
Specifications:, USB connection for convenient firmware upload and configuration, Content:, This package contains all the items on the main picture:, Controller board,
The wires, headers and all the necessary connectors are pre-soldered ...ngHobbies
2 AXIS BRUSHLESS GIMBAL FOR GOPRO CAMERAS
| http | //www.basecamelectronics.com/downloads/ |
Please note:, motors and controllers are not included. Please check below in the specifications for the required motors and controllers., Specifications:, Strong anodized aluminum frame, easy to assemble, Recommended motors (only one pair is required):, 2 x, recommended controller:, 2 axis brushless controller, Content:, This package contains all the items on the main picture:, Hardware pacakge,
This package contains all the necessary hardware pieces to assemble ...