GetFPV
FRSKY DF 2.4GHZ COMBO PACK FOR FUTABA W/ MODULE & RX
| Futaba | 3PM, 3PK, 7U, 8U, 9C, 10C, 9Z, FN-Series, T10C, FC-18, FC-28. |
| Hitec | Optic 6, Eclipse 7, Prism 7 |
| WFLY | WFT09, WFT-08 |
| Operating voltage | 3.5 - 10.0V |
| Power consumption | 100mA |
| Resolution | 3072 |
| Latency | 22ms |
| Analog voltage | 0~3.3V |
| Range | 1.5km-2.5km |
| Dimensions | 55 x 25 x 14 mm |
| Weight | 12.4g |
| Version | 2.0 |
| Operating voltage | 6.0V-13.0V (can handle 3S!) |
| Power consumption | 50mA |
| Resolution | 3072 (11bit) |
| Dimensions | 58.5x37.5x22mm |
| Version | 2.0 |
Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., V8FT:, Receiver Specification:, Number of channels: 8, Module specification:, Output Power:: 60mW,
Details FrSKY ACCST technology is proven, approved by many model ...GetFPV
REPLACEMENT TOP PLATE FOR THE TBS DISCOVERY
,
Details This is 1 replacement top plate for the TBS ...GetFPV
TEAM BLACKSHEEP ZII CAMERA CASE WITH LAYERLENS
The new GoPro / Flight Cam mount for the ZII Zephyr Wing that was jointly developed by Team Black Sheep and FPV Manuals. This new case is a sturdy plywood construction that protects your flight cam and GoPro and also provides you FPV Manual's popular GoPro lens protection, LayerLens. The kit comes with:, Plywood GoPro Camera & FPV mount,
Details Spare plywood front plate LayerLens front Velcro strap This ...GetFPV
FATSHARK FILTERED BALANCE LEAD POWER SUPPLY
,
Details Supplying power to your TX/camera is a snap with ...GetFPV
3.5MM GOLD "BULLET" CONNECTORS (10 PAIR)
,
Details 3.5mm Gold connectors. Rated up to 80 amps. Package ...GetFPV
GRAUPNER ADAPTER FOR AEROSIM RC FLIGHT SIMULATOR
,
Details Graupner trainer adapter used to connect to the USB ...GetFPV
LAYERLENS GOPRO LENS PROTECTION (FOR GOPRO 1 & 2)
NOTE: This version of LayerLens is not compatible with the GoPro Hero 3. A new LayerLens for the Hero 3 will be released soon., For this reason, FPV Manuals has developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. LayerLens weighs only 11g — about 10% of the weight of the GoPro case. LayerLens is a precision laser cut frame that holds the protective glass lens found in the GoPro's case. LayerLens is pushed onto the GoPro’s built in lens. It sits tightly in place and is secured by an included velcro band. In case of a crash that scratches LayerLens’ glass lens, you can easily swap out the scratched protective lens and replace it with one of the lenses that are readily available by GoPro as part of their “Lens Replacement Kit” (which includes 2 lenses for $14 to $20 USD).,
Details The case that comes with the GoPro camera is ...GetFPV
TIGER MOTOR M5 CW PROP ADAPTER FOR CARBON FIBER PROPS
,
Details One 5mm Clockwise Thread Nut/Prop Adapter for MT series ...GetFPV
TIGER MOTOR M6 CW PROP ADAPTER FOR CARBON FIBER PROPS
,
Details One 6mm Clockwise Thread Nut/Prop Adapter for MT series ...GetFPV
DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER AND GPS/COMPASS
| Motor Disarm | There are two modes of Motor Disarm |
| VU Input | 7.4V ~ 26.0 V |
| Output(V-SEN port red wire) | 3A@5V |
| (burst current | 7.5A) |
| MAX | 3.15W(0.25A@12.6V) |
| Normal | 1.638W(0.13A@12.6V) |
| Vertical | ±0.8m |
| Horizontal | ±2.5m |
| PMU | 28g |
| GPS | 27g |
| LED | 13g |
| PMU | 39.5mm x 27.5mm x 10.0mm |
| LED | 25mm x 25mm x 7.0mm |
| Note | Flight Performance can be effected by mechanical performance and payloads |
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
Details What's new with the NAZAM V2 Hardware PMU V2 ...GetFPV
5" LUMENIER LCD FPV MONITOR
| Image | 5" TFT LCD |
| Resolution | 800x480 |
| Horizontal frequency range | 30-60KHz |
| Field frequency range | 60-75Hz |
| Brightness | 450cd/m² |
| Viewing Angle | 70°/70°(L/R) 50°/70°U/D |
| Contrast Ratio | 500 |
| Response time | 10ms |
| Input Voltage | DC 6-16V (2s-4s compatible) |
| Power Consumption | ≦7W |
| Input Singal | RCA video and audio |
| Size | 146 × 100W ×46H |
| Weight | 350g with cables and sun shield |
| Mounting | Standard 1/4-20 tripod and VESA mounts |
Display Ratio: 16:9 or 4:3 selectable,
Details This FPV monitor is a small compact 5" super ...GetFPV
FATSHARK 600TVL CMOS PAN/TILT CAM
| Imager | 1/3" |
| Lens | 3.6mm |
| Operating Voltage | 3.5~5VDC |
| Operating Current | 60mA @5V |
| Weight | 33g |
Specs:, Servos:, 9g 180 degree smooth action,
Details Performance that rivals CCD at a fraction of the ...